CDV30FF272JO3 Equivalent & Substitute Parts

Part Overview

The CDV30FF272JO3 is a 2700 pF mica capacitor rated for 1 kV, manufactured by Cornell Dubilier Electronics (CDE) in the CDV30 series. This through-hole radial component is designed for general-purpose applications requiring high voltage performance and stable capacitance across a wide operating temperature range of -55°C to 125°C. The part is currently active in production with 802 units in stock. Equivalent substitute parts are necessary to address supply chain continuity, compliance requirements, or inventory optimization while maintaining identical electrical and mechanical performance.

Substiute Parts

CDV30FF272JO3

Cornell Dubilier Electronics (CDE)In Stock: 832CDV30FF272JO3 Datasheet

Current PartRFQ

CDV30FF272JO3F

Cornell Dubilier Electronics (CDE)In Stock: 1133CDV30FF272JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CDV30FF272JO3 is determined by strict equivalence across the following electrical and mechanical parameters:

• Capacitance Value: 2700 pF (exact match required)
• Tolerance: ±5% (exact match required)
• Voltage Rating: 1 kV (exact match required)
• Dielectric Material: Mica (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial (exact match required)
• Series Classification: CDV30 (exact match required)

The substitute part CDV30FF272JO3F meets all of these criteria and is therefore a direct parametric equivalent. Differences in regulatory compliance status (RoHS and REACH) do not affect electrical or mechanical interchangeability.

Parameter Comparison

Engineering Selection Recommendations

The CDV30FF272JO3F is a direct parametric equivalent to the CDV30FF272JO3 across all electrical and mechanical specifications. Both parts are manufactured by Cornell Dubilier Electronics in the active CDV30 series and deliver identical performance in circuit applications.

Compliance Considerations: The CDV30FF272JO3F offers improved regulatory compliance status, being ROHS3 compliant and REACH unaffected, compared to the original part which is RoHS non-compliant and REACH affected. Selection between these parts should be based on project-specific compliance requirements and supply chain constraints.

Inventory Status: The CDV30FF272JO3F maintains higher current inventory (1097 units) relative to the CDV30FF272JO3 (802 units), which may influence procurement decisions for high-volume or time-sensitive applications.

Both parts are suitable for direct substitution in through-hole radial mounting applications requiring 2700 pF capacitance at 1 kV with ±5% tolerance across the -55°C to 125°C operating range.

Frequently Asked Questions (FAQ)

Q: Can CDV30FF272JO3F be used as a direct replacement for CDV30FF272JO3?

A: Yes. The CDV30FF272JO3F is a direct parametric equivalent with identical capacitance (2700 pF), voltage rating (1 kV), tolerance (±5%), dielectric material (mica), operating temperature range (-55°C ~ 125°C), mounting type (through hole), and package configuration (radial). Both parts are manufactured by Cornell Dubilier Electronics in the CDV30 series.

Q: What are the differences between these two parts?

A: The primary differences are regulatory compliance status and current inventory levels. The CDV30FF272JO3F is ROHS3 compliant and REACH unaffected, while the CDV30FF272JO3 is RoHS non-compliant and REACH affected. These differences do not affect electrical or mechanical performance.

Q: Are there any lead spacing or dimensional differences?

A: No dimensional or lead spacing differences are specified for either part. Both are radial through-hole components in the CDV30 series with identical mechanical interfaces.

Q: Which part should be selected for new designs?

A: Selection should be based on project compliance requirements. For applications requiring RoHS3 compliance or REACH compliance, the CDV30FF272JO3F is the appropriate choice. Both parts are active in production and suitable for new designs.

Q: Can these parts be used interchangeably in existing assemblies?

A: Yes. The CDV30FF272JO3F can be substituted into existing assemblies using the CDV30FF272JO3 without circuit redesign or re-qualification, provided that compliance requirements are satisfied.

Q: What is the tolerance specification for capacitance?

A: Both parts have a tolerance of ±5%, meaning the actual capacitance value will fall within the range of 2565 pF to 2835 pF.