CDV30FF221JO3 220 pF Mica Capacitor 1 kV Radial

Part Overview

The CDV30FF221JO3 is a 220 pF mica capacitor rated at 1 kV, manufactured by Cornell Dubilier Electronics (CDE) in the CDV30 series. This component is designed for general-purpose applications requiring high voltage performance and precise capacitance values with ±5% tolerance. The part is currently active in production with 743 pieces available in new original inventory. Equivalent substitute parts may be required due to inventory availability, compliance requirements, or specific application certifications.

Substiute Parts

CDV30FF221JO3

Cornell Dubilier Electronics (CDE)In Stock: 820CDV30FF221JO3 Datasheet

Current PartRFQ

CDV30FF221JO3F

Cornell Dubilier Electronics (CDE)In Stock: 760CDV30FF221JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CDV30FF221JO3 is valid when an alternative part maintains the following critical parameters:

• Capacitance: 220 pF (exact match required)
• Voltage Rating: 1 kV (exact match required)
• Dielectric Material: Mica (required for performance characteristics)
• Tolerance: ±5% (acceptable match range)
• Operating Temperature Range: -55°C to 125°C (required for thermal compatibility)
• Mounting Type: Through Hole (required for circuit board compatibility)
• Package / Case: Radial (required for physical fit)

Parts meeting all these electrical and mechanical parameters are functionally equivalent and interchangeable in the circuit design. Compliance certifications and RoHS status may vary between substitute options depending on application requirements.

Parameter Comparison

Engineering Selection Recommendations

Both CDV30FF221JO3 and CDV30FF221JO3F are electrically and mechanically equivalent in the CDV30 series. Selection between these parts is determined by compliance and regulatory requirements:

• CDV30FF221JO3: Select for applications where RoHS non-compliance is acceptable and REACH Affected status does not conflict with supply chain requirements.
• CDV30FF221JO3F: Select for applications requiring ROHS3 compliance and REACH unaffected status, such as products destined for European markets or applications with strict environmental compliance mandates.

Both parts maintain identical electrical performance across the rated operating temperature range of -55°C to 125°C and are suitable for high-voltage general-purpose circuits.

Frequently Asked Questions (FAQ)

Q: Can CDV30FF221JO3F replace CDV30FF221JO3 in my circuit?

A: Yes. Both parts are electrically and mechanically equivalent with identical capacitance (220 pF), voltage rating (1 kV), tolerance (±5%), dielectric material (mica), operating temperature range (-55°C to 125°C), and radial through-hole package. The CDV30FF221JO3F variant offers improved compliance status with ROHS3 certification and REACH unaffected designation.

Q: What is the significance of the RoHS and REACH status differences?

A: RoHS3 compliance (CDV30FF221JO3F) restricts hazardous substances and is required for products sold in the European Union. REACH unaffected status indicates the part is not subject to REACH substance restrictions. The CDV30FF221JO3 is RoHS non-compliant and REACH affected. Selection depends on your end-product regulatory requirements and target markets.

Q: Are the lead spacing and physical dimensions identical between the two parts?

A: Both parts share the same radial through-hole package configuration. No lead spacing or dimensional variations are specified in the technical parameters, indicating equivalent physical footprints suitable for the same PCB layout.

Q: Does switching from CDV30FF221JO3 to CDV30FF221JO3F affect circuit performance?

A: No. Both parts operate within identical electrical specifications across the full temperature range. The change in manufacturing variant only affects compliance certifications and regulatory status, not functional performance.