CDV30FF153JO3F Equivalent & Substitute Parts

Part Overview

The CDV30FF153JO3F is a 0.015 µF mica capacitor rated for 1 kV, manufactured by Cornell Dubilier Electronics (CDE) in the CDV30 series. This through-hole radial component is designed for general-purpose applications requiring high voltage performance and stable dielectric characteristics across extended temperature ranges. The part maintains active product status with 972 units in current inventory. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity when the primary part becomes unavailable or when specific compliance requirements necessitate alternative sourcing.

Substiute Parts

CDV30FF153JO3F

Cornell Dubilier Electronics (CDE)In Stock: 1012CDV30FF153JO3F Datasheet

Current PartRFQ

CDV30FF153JO3F+FEZ

Cornell Dubilier Electronics (CDE)In Stock: 751CDV30FF153JO3F+FEZ Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CDV30FF153JO3F are identified based on strict parametric equivalence. The substitution logic requires that all critical electrical and mechanical parameters remain identical:

Mandatory Matching Parameters:

• Capacitance value: 0.015 µF (exact match required)
• Voltage rating: 1 kV (exact match required)
• Tolerance: ±5% (exact match required)
• Dielectric material: Mica (exact match required)
• Mounting type: Through Hole (exact match required)
• Package configuration: Radial (exact match required)
• Operating temperature range: -55°C ~ 125°C (exact match required)

Substitute parts within the CDV30 series maintain identical electrical performance and physical form factor, ensuring direct replacement capability in circuit applications. Variations in compliance certifications (RoHS status, REACH classification) and packaging conditions do not affect functional equivalence but may influence procurement decisions based on regulatory requirements.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (CDV30FF153JO3F): The CDV30FF153JO3F is the preferred selection for applications requiring ROHS3 compliance and REACH unaffected status. This part is actively manufactured and maintains higher inventory availability (972 units). Use this part for all new designs and applications subject to RoHS3 regulatory requirements.

Substitute Part Selection (CDV30FF153JO3F+FEZ): The CDV30FF153JO3F+FEZ provides functional equivalence with identical electrical and mechanical specifications. This substitute is suitable for applications where RoHS3 compliance is not mandated and REACH affected status is acceptable. The "+FEZ" designation indicates packaging or handling variations that do not affect circuit performance. Current inventory of 717 units supports procurement needs for replacement and repair applications.

Compliance Considerations: Selection between these parts must account for end-product regulatory requirements. Applications destined for markets requiring RoHS3 compliance must use the primary part. Applications with no RoHS3 requirement may utilize either part based on availability and cost considerations.

Frequently Asked Questions (FAQ)

Q: Can CDV30FF153JO3F+FEZ be used as a direct replacement for CDV30FF153JO3F?

A: Yes. Both parts are electrically and mechanically identical. They share the same capacitance (0.015 µF), voltage rating (1 kV), tolerance (±5%), dielectric material (mica), mounting type (through hole), and radial package configuration. The "+FEZ" designation does not affect functional performance in circuit applications.

Q: What does the "+FEZ" suffix indicate?

A: The "+FEZ" suffix represents a packaging or handling specification variant within the CDV30 series. This designation does not alter electrical characteristics or physical dimensions relevant to PCB assembly and circuit operation.

Q: Are there differences in compliance certifications between these parts?

A: Yes. The CDV30FF153JO3F is ROHS3 compliant and REACH unaffected. The CDV30FF153JO3F+FEZ is RoHS non-compliant and REACH affected. These differences are compliance-related only and do not affect electrical performance. Selection depends on regulatory requirements of the end application.

Q: Can these parts be used interchangeably in existing designs?

A: Electrical and mechanical interchangeability is confirmed. However, design documentation and compliance certifications must be updated if substituting the primary part with the alternative. Verify that the substitute part meets all regulatory requirements applicable to the end product.

Q: What is the operating temperature range for both parts?

A: Both parts operate across -55°C to 125°C. This identical temperature range ensures equivalent performance in thermal cycling and extended temperature applications.

Q: Are the lead spacing and physical dimensions identical?

A: Both parts are radial through-hole components in the CDV30 series with identical package specifications. Lead spacing and physical dimensions are equivalent, ensuring direct PCB compatibility without layout modifications.

Q: Which part should be selected for new designs?

A: For new designs, select CDV30FF153JO3F if RoHS3 compliance is required. If RoHS3 compliance is not a design requirement, either part may be selected based on availability and procurement considerations.