CDV30FF152JO3 Equivalent & Substitute Parts

Part Overview

The CDV30FF152JO3 is a 1500 pF mica capacitor rated for 1 kV, manufactured by Cornell Dubilier Electronics (CDE) in the CDV30 series. This through-hole radial component operates across a temperature range of -55°C to 125°C and is designed for general-purpose applications requiring high-voltage mica dielectric performance.

The CDV30FF152JO3 is classified as Active product status. Identification of equivalent and substitute parts becomes necessary when the original part number is unavailable, when procurement lead times require alternative sourcing, or when design requirements necessitate compliance with specific regulatory standards such as RoHS or REACH certifications.

Substiute Parts

CDV30FF152JO3

Cornell Dubilier Electronics (CDE)In Stock: 949CDV30FF152JO3 Datasheet

Current PartRFQ

CDV30FF152JO3F

Cornell Dubilier Electronics (CDE)In Stock: 935CDV30FF152JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CDV30FF152JO3 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Capacitance value: 1500 pF (exact match required)
• Tolerance: ±5% (exact match required)
• Voltage rating: 1 kV (exact match required)
• Dielectric material: Mica (exact match required)

Mechanical Parameters:

• Mounting type: Through Hole (exact match required)
• Package configuration: Radial (exact match required)
• Operating temperature range: -55°C ~ 125°C (exact match required)

Regulatory & Compliance Parameters:

• Series compatibility: CDV30 series
• Product status: Active

The substitute part CDV30FF152JO3F meets all electrical, mechanical, and functional requirements for direct substitution. The primary distinction between the main part and its substitute relates to RoHS and REACH compliance status, which may be relevant depending on application and regional regulatory requirements.

Parameter Comparison

Engineering Selection Recommendations

CDV30FF152JO3: Select this part number when RoHS non-compliance is acceptable within your application requirements and regulatory environment. This variant is suitable for legacy designs, non-regulated applications, or systems where REACH-affected materials are permissible.

CDV30FF152JO3F: Select this part number when RoHS3 compliance and REACH-unaffected status are required. This variant is appropriate for applications subject to EU regulations, consumer electronics, automotive systems, or any design requiring full compliance with modern environmental and material restriction directives.

Both part numbers are electrically and mechanically identical, with identical electrical performance across all specified parameters. Selection between them depends solely on compliance requirements and regulatory constraints applicable to the end application.

Frequently Asked Questions (FAQ)

Q: Are CDV30FF152JO3 and CDV30FF152JO3F electrically interchangeable?

A: Yes. Both parts are electrically identical with matching capacitance (1500 pF), tolerance (±5%), voltage rating (1 kV), dielectric material (mica), and operating temperature range (-55°C ~ 125°C). They can be substituted without affecting circuit performance.

Q: What is the difference between these two part numbers?

A: The primary difference is regulatory compliance status. CDV30FF152JO3F is ROHS3 compliant and REACH unaffected, while CDV30FF152JO3 is RoHS non-compliant and REACH affected. All electrical and mechanical specifications are identical.

Q: Can I use CDV30FF152JO3F as a replacement for CDV30FF152JO3 in an existing design?

A: Yes. The CDV30FF152JO3F is a direct substitute with identical electrical performance and mechanical form factor. No circuit modifications or re-qualification is required.

Q: Which part should I specify for new designs?

A: For new designs, CDV30FF152JO3F is recommended due to ROHS3 compliance and REACH-unaffected status, ensuring compatibility with current and future regulatory requirements.

Q: Are both parts available in the same packaging?

A: Yes. Both parts are supplied in bulk packaging as through-hole radial components with identical mechanical dimensions and lead spacing.

Q: What is the operating temperature range for both parts?

A: Both CDV30FF152JO3 and CDV30FF152JO3F operate across -55°C to 125°C.