CDV30FF113JO3 Equivalent & Substitute Parts

Part Overview

The CDV30FF113JO3 is a 0.011 µF mica capacitor rated for 1 kV, manufactured by Cornell Dubilier Electronics (CDE) in the CDV30 series. This through-hole radial capacitor is designed for general-purpose applications requiring high voltage performance and stable dielectric characteristics across extended temperature ranges. The part is currently active in production with 761 units in stock.

Identification of substitute parts becomes necessary when the original part reaches end-of-life status, when supply constraints occur, or when design requirements mandate compliance with specific regulatory standards such as RoHS or REACH regulations.

Substiute Parts

CDV30FF113JO3

Cornell Dubilier Electronics (CDE)In Stock: 810CDV30FF113JO3 Datasheet

Current PartRFQ

CDV30FF113JO3F

Cornell Dubilier Electronics (CDE)In Stock: 1067CDV30FF113JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CDV30FF113JO3 are identified based on strict parametric equivalence. The following criteria determine substitution eligibility:

Primary Matching Criteria:

• Capacitance value: 0.011 µF (exact match required)
• Voltage rating: 1 kV (exact match required)
• Tolerance: ±5% (exact match required)
• Dielectric material: Mica (exact match required)
• Operating temperature range: -55°C ~ 125°C (exact match required)
• Mounting type: Through Hole (exact match required)
• Package configuration: Radial (exact match required)

Secondary Considerations:

• Manufacturer: Cornell Dubilier Electronics (CDE)
• Series designation: CDV30
• Product status: Active

The CDV30FF113JO3F qualifies as a parametric equivalent because it maintains identical electrical and mechanical specifications while offering improved regulatory compliance status.

Parameter Comparison

Engineering Selection Recommendations

CDV30FF113JO3F as Primary Substitute:

The CDV30FF113JO3F provides complete parametric equivalence to the CDV30FF113JO3 across all electrical and mechanical specifications. The substitute part maintains identical capacitance, voltage rating, tolerance, dielectric material, temperature range, and mounting configuration.

The CDV30FF113JO3F offers improved regulatory compliance status. It is ROHS3 compliant, whereas the original part is RoHS non-compliant. Additionally, the substitute is REACH unaffected, compared to the original part's REACH affected status. Both parts share identical ECCN and HTSUS classifications.

Selection between these parts should be based on regulatory requirements applicable to the end application and geographic market. Applications requiring RoHS3 compliance or REACH compliance should specify the CDV30FF113JO3F. The CDV30FF113JO3F also provides higher inventory availability with 1007 units in stock compared to 761 units of the original part.

Frequently Asked Questions (FAQ)

Q: Can the CDV30FF113JO3F be used as a direct replacement for the CDV30FF113JO3?

A: Yes. The CDV30FF113JO3F is a parametric equivalent with identical electrical and mechanical specifications. All key parameters including capacitance (0.011 µF), voltage rating (1 kV), tolerance (±5%), dielectric material (mica), operating temperature range (-55°C ~ 125°C), mounting type (through hole), and package configuration (radial) are identical.

Q: What is the difference between these two parts?

A: The primary differences are regulatory compliance certifications. The CDV30FF113JO3F is ROHS3 compliant and REACH unaffected, while the CDV30FF113JO3 is RoHS non-compliant and REACH affected. All functional and physical specifications are identical.

Q: Which part should be selected for new designs?

A: Selection depends on regulatory requirements. For applications requiring RoHS3 compliance or REACH compliance, the CDV30FF113JO3F is the appropriate choice. Both parts are active products with adequate inventory availability.

Q: Are the lead spacings identical between these parts?

A: Lead spacing information is not specified in the technical data for either part. Physical verification is required if lead spacing is a critical design parameter.

Q: Can these parts be used interchangeably in existing assemblies?

A: Yes, provided that the assembly does not have specific regulatory compliance requirements that would exclude the non-compliant variant. The identical through-hole radial package configuration ensures mechanical compatibility.

Q: What is the temperature stability of these mica capacitors?

A: Both parts operate across the temperature range of -55°C to 125°C. Mica dielectric material provides stable capacitance characteristics across this range, suitable for general-purpose applications.