CDV19FF362JO3F Equivalent & Substitute Parts

Part Overview

The CDV19FF362JO3F is a 3600 pF mica capacitor rated for 1 kV, manufactured by Cornell Dubilier Electronics (CDE). This through-hole radial component operates across a temperature range of -55°C to 125°C and is designed for general-purpose applications. The part is currently active in production with ROHS3 compliance and REACH unaffected status. Substitute parts are identified when inventory constraints or supply chain requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

CDV19FF362JO3F

Cornell Dubilier Electronics (CDE)In Stock: 1062CDV19FF362JO3F Datasheet

Current PartRFQ

CDV30FF362JO3F

Cornell Dubilier Electronics (CDE)In Stock: 843CDV30FF362JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CDV19FF362JO3F is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part CDV30FF362JO3F qualifies as a parametric equivalent based on the following criteria:

Matching Parameters:

• Capacitance: 3600 pF (identical)
• Tolerance: ±5% (identical)
• Voltage Rating: 1 kV (identical)
• Dielectric Material: Mica (identical)
• Operating Temperature Range: -55°C ~ 125°C (identical)
• Mounting Type: Through Hole (identical)
• Package Configuration: Radial (identical)
• Application Class: General Purpose (identical)
• Regulatory Compliance: ROHS3 Compliant, REACH Unaffected (identical)

The primary distinction between the main part and substitute is the series designation (CDV19 versus CDV30), which reflects different product lines within Cornell Dubilier Electronics' mica capacitor portfolio. Both series maintain identical performance specifications for the stated 3600 pF, 1 kV configuration.

Parameter Comparison

Engineering Selection Recommendations

Both the CDV19FF362JO3F and CDV30FF362JO3F are active production components from Cornell Dubilier Electronics with full ROHS3 compliance and REACH unaffected status. Selection between these parts is based on availability and supply chain considerations rather than electrical or mechanical performance differences.

The CDV19FF362JO3F is the primary specification with 1001 pieces in current inventory. The CDV30FF362JO3F serves as a direct parametric substitute with 807 pieces available. Both components satisfy identical circuit requirements for 3600 pF, 1 kV mica capacitor applications in through-hole radial configurations.

Component selection should prioritize inventory availability and lead time requirements. No performance degradation or functional compromise occurs when substituting between these two part numbers in applications requiring the specified electrical and thermal characteristics.

Frequently Asked Questions (FAQ)

Q: Can CDV30FF362JO3F be used in place of CDV19FF362JO3F?

A: Yes. The CDV30FF362JO3F is a parametric equivalent with identical capacitance (3600 pF), voltage rating (1 kV), tolerance (±5%), dielectric material (mica), operating temperature range (-55°C ~ 125°C), mounting type (through hole), and package configuration (radial). Both components are ROHS3 compliant and REACH unaffected.

Q: What is the difference between the CDV19 and CDV30 series?

A: The series designation reflects different product lines within Cornell Dubilier Electronics' mica capacitor portfolio. For the 3600 pF, 1 kV radial configuration, both series maintain identical electrical and mechanical specifications.

Q: Are there any physical dimension differences between these parts?

A: Physical dimensions are not specified in the provided technical parameters for either component. Both are through-hole radial mica capacitors with identical electrical ratings and operating characteristics.

Q: Do both parts have the same compliance certifications?

A: Yes. Both CDV19FF362JO3F and CDV30FF362JO3F are ROHS3 compliant and REACH unaffected. Both carry ECCN EAR99 classification and HTSUS code 8532.29.0020.

Q: Which part should be selected for new designs?

A: Selection should be based on current inventory availability and supply chain lead times. Both components are active production parts with identical performance specifications. No technical preference exists between the two part numbers.