CDV19FF362JO3 Equivalent & Substitute Parts

Part Overview

The CDV19FF362JO3 is a 3600 pF mica capacitor rated for 1 kV, manufactured by Cornell Dubilier Electronics (CDE). This through-hole radial component is designed for general-purpose applications requiring high voltage performance and stable capacitance across the operating temperature range of -55°C to 125°C. The part is currently active in production with 710 units in stock.

Identification of substitute parts becomes necessary when the primary part reaches end-of-life status, inventory depletion occurs, or when design requirements permit selection from alternative product series within the same electrical and mechanical specifications.

Substiute Parts

CDV19FF362JO3

Cornell Dubilier Electronics (CDE)In Stock: 737CDV19FF362JO3 Datasheet

Current PartRFQ

CDV30FF362JO3F

Cornell Dubilier Electronics (CDE)In Stock: 843CDV30FF362JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CDV19FF362JO3 is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 3600 pF (exact match required)
• Tolerance: ±5% (exact match required)
• Voltage Rating: 1 kV (exact match required)
• Dielectric Material: Mica (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial (exact match required)

The CDV30FF362JO3F qualifies as a parametric equivalent because it maintains identical electrical and mechanical specifications across all critical selection criteria. The primary distinction between the main part and its substitute lies in the product series designation (CDV19 versus CDV30) and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

CDV19FF362JO3 is suitable for applications where RoHS non-compliance is acceptable and REACH-affected materials are permitted by design specifications.

CDV30FF362JO3F is the appropriate selection for designs requiring ROHS3 compliance and REACH-unaffected component status. Both parts maintain identical electrical performance and mechanical compatibility within the specified operating parameters.

Selection between these parts should be based on regulatory compliance requirements of the end application and supply chain constraints rather than electrical performance considerations, as both components deliver equivalent functional characteristics.

Frequently Asked Questions (FAQ)

Q: Can CDV30FF362JO3F be used as a direct replacement for CDV19FF362JO3?

A: Yes. Both components share identical capacitance (3600 pF), tolerance (±5%), voltage rating (1 kV), dielectric material (mica), operating temperature range (-55°C to 125°C), mounting type (through hole), and radial package configuration. Electrical and mechanical compatibility is confirmed.

Q: What is the primary difference between these two parts?

A: The CDV30FF362JO3F is ROHS3 compliant and REACH unaffected, while the CDV19FF362JO3 is RoHS non-compliant and REACH affected. Electrical specifications are identical.

Q: Are there any physical dimension differences between these parts?

A: No dimension data is provided in the specifications for either component. Both are radial through-hole packages with identical electrical ratings.

Q: Which part should be selected for new designs?

A: Selection depends on regulatory requirements. For applications requiring ROHS3 compliance and REACH compliance, specify CDV30FF362JO3F. For applications without these constraints, either part is electrically equivalent.

Q: Is inventory availability a factor in part selection?

A: CDV30FF362JO3F has 807 units in stock compared to 710 units for CDV19FF362JO3. Both maintain adequate inventory levels for standard procurement.