CDV19FF222JO3 Equivalent & Substitute Parts

Part Overview

The CDV19FF222JO3 is a 2200 pF mica capacitor rated for 1 kV, manufactured by Cornell Dubilier Electronics (CDE) in the CDV19 series. This through-hole radial component is designed for general-purpose applications requiring stable capacitance and high voltage performance across an operating temperature range of -55°C to 125°C. The part is currently active in production. Substitute parts are identified to address inventory availability, compliance requirements, or specific application constraints while maintaining electrical and mechanical compatibility.

Substiute Parts

CDV19FF222JO3

Cornell Dubilier Electronics (CDE)In Stock: 968CDV19FF222JO3 Datasheet

Current PartRFQ

CDV19FF222JO3F

Cornell Dubilier Electronics (CDE)In Stock: 2100CDV19FF222JO3F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CDV19FF222JO3 is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 2200 pF (exact match required)
• Tolerance: ±5% (exact match required)
• Voltage Rating: 1 kV (exact match required)
• Dielectric Material: Mica (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial (exact match required)
• Lead Spacing: 0.343" / 8.70 mm (exact match required)
• Physical Dimensions: 0.689" L x 0.311" W / 17.50 mm x 7.90 mm (exact match required)
• Maximum Seated Height: 0.559" / 14.20 mm (exact match required)

Substitute parts must originate from the same manufacturer series (CDV19) and maintain identical electrical performance and physical form factor to ensure direct board-level compatibility without design modification or re-qualification.

Parameter Comparison

Engineering Selection Recommendations

CDV19FF222JO3F is a direct electrical and mechanical equivalent to CDV19FF222JO3. Both parts are manufactured by Cornell Dubilier Electronics within the CDV19 series and share identical capacitance, voltage rating, tolerance, dielectric material, operating temperature range, and physical dimensions.

The primary distinction between these parts is regulatory compliance status:

• CDV19FF222JO3: RoHS non-compliant; REACH Affected
• CDV19FF222JO3F: ROHS3 Compliant; REACH Unaffected

Selection between these parts should be based on application regulatory requirements. Applications subject to RoHS3 or REACH compliance mandates must use CDV19FF222JO3F. Applications without such constraints may use either part. The CDV19FF222JO3F variant also offers higher current inventory availability (2090 pcs vs. 903 pcs).

Frequently Asked Questions (FAQ)

Q: Can CDV19FF222JO3F be used as a direct replacement for CDV19FF222JO3 on existing PCBs?

A: Yes. Both parts are electrically and mechanically identical. They share the same capacitance (2200 pF), voltage rating (1 kV), tolerance (±5%), dielectric material (mica), operating temperature range (-55°C to 125°C), mounting type (through hole), package configuration (radial), lead spacing (0.343" / 8.70 mm), and physical dimensions (0.689" L x 0.311" W / 17.50 mm x 7.90 mm). No PCB redesign or re-qualification is required.

Q: What is the difference between CDV19FF222JO3 and CDV19FF222JO3F?

A: The parts are functionally identical. The difference is regulatory compliance: CDV19FF222JO3F is ROHS3 Compliant and REACH Unaffected, while CDV19FF222JO3 is RoHS non-compliant and REACH Affected. Selection depends on application compliance requirements.

Q: Are there any physical dimension differences between these parts?

A: No. Both parts have identical dimensions: 0.689" L x 0.311" W (17.50 mm x 7.90 mm), maximum seated height of 0.559" (14.20 mm), and lead spacing of 0.343" (8.70 mm).

Q: Which part should I select for new designs?

A: For new designs subject to RoHS3 or REACH compliance requirements, use CDV19FF222JO3F. For applications without such constraints, either part is acceptable. CDV19FF222JO3F also offers higher inventory availability.

Q: Can these parts be used interchangeably in high-voltage applications?

A: Yes. Both parts are rated for 1 kV and operate across the same temperature range (-55°C to 125°C). They are fully interchangeable for high-voltage general-purpose applications.