CDV19FF201JO3 Equivalent & Substitute Parts

Part Overview

The CDV19FF201JO3 is a 200 pF mica capacitor rated for 1 kV operation in a radial through-hole configuration, manufactured by Cornell Dubilier Electronics (CDE). This component is classified as active and suitable for general-purpose applications requiring high-voltage, low-capacitance energy storage with excellent stability and reliability characteristics inherent to mica dielectric technology.

Substitute parts are identified to address inventory availability, compliance requirements, or procurement lead time considerations while maintaining electrical and mechanical compatibility within the specified parameter tolerances.

Substiute Parts

CDV19FF201JO3

Cornell Dubilier Electronics (CDE)In Stock: 982CDV19FF201JO3 Datasheet

Current PartRFQ

CDV19FF201JO3F

Cornell Dubilier Electronics (CDE)In Stock: 11249CDV19FF201JO3F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CDV19FF201JO3 is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 200 pF (exact match required)
• Tolerance: ±5% (exact match required)
• Voltage Rating: 1 kV (exact match required)
• Dielectric Material: Mica (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial (exact match required)
• Lead Spacing: 0.343" / 8.70 mm (exact match required)
• Physical Dimensions: 0.642" L x 0.189" W / 16.30 mm x 4.80 mm (exact match required)
• Maximum Seated Height: 0.500" / 12.70 mm (exact match required)

All identified substitute parts maintain identical electrical performance and mechanical compatibility. Variations in regulatory compliance status (RoHS, REACH) do not affect functional substitution but may influence procurement decisions based on end-application requirements.

Parameter Comparison

Engineering Selection Recommendations

CDV19FF201JO3F is the direct substitute for CDV19FF201JO3. Both components are manufactured by Cornell Dubilier Electronics within the active CDV19 series and maintain identical electrical specifications and mechanical dimensions.

The primary distinction between these parts is regulatory compliance status:

• CDV19FF201JO3: RoHS non-compliant, REACH Affected
• CDV19FF201JO3F: ROHS3 Compliant, REACH Unaffected

Selection between these parts is determined by end-application regulatory requirements. Applications subject to RoHS3 or REACH restrictions require CDV19FF201JO3F. Applications without such constraints may utilize either part interchangeably from an electrical and mechanical standpoint.

Both parts are active products with established manufacturing and supply chains. CDV19FF201JO3F demonstrates higher current inventory availability (11,182 pcs vs. 894 pcs), which may influence procurement decisions based on delivery timeline requirements.

Frequently Asked Questions (FAQ)

Q: Can CDV19FF201JO3F be used as a direct replacement for CDV19FF201JO3 in all applications?

A: Yes, from an electrical and mechanical perspective. CDV19FF201JO3F is electrically and mechanically identical to CDV19FF201JO3. The substitute is suitable for direct board-level replacement without circuit modification or re-qualification. Regulatory compliance requirements must be evaluated for the specific end application.

Q: What is the difference between CDV19FF201JO3 and CDV19FF201JO3F?

A: The parts are functionally equivalent. CDV19FF201JO3F is ROHS3 compliant and REACH unaffected, while CDV19FF201JO3 is RoHS non-compliant and REACH affected. All electrical parameters, capacitance value, voltage rating, tolerance, temperature range, and physical dimensions are identical.

Q: Are the physical dimensions and lead spacing identical between these parts?

A: Yes. Both parts share identical dimensions (0.642" L x 0.189" W / 16.30 mm x 4.80 mm), lead spacing (0.343" / 8.70 mm), and maximum seated height (0.500" / 12.70 mm). PCB footprints and mechanical mounting are interchangeable.

Q: Which part should be selected for new designs?

A: Selection is based on regulatory requirements. For applications requiring RoHS3 or REACH compliance, CDV19FF201JO3F is the appropriate choice. Both parts are active products suitable for new designs.

Q: Is there a performance difference between these mica capacitors?

A: No. Both parts are 200 pF ±5% tolerance mica capacitors rated for 1 kV operation across the -55°C to 125°C temperature range. Electrical performance, stability, and reliability characteristics are identical.