CDV19FF152JO3 Mica Capacitor 1500pF 1kV Radial Equivalent & Substitute Parts

Part Overview

The CDV19FF152JO3 is a 1500 pF mica capacitor rated for 1 kV, manufactured by Cornell Dubilier Electronics (CDE) in the CDV19 series. This through-hole radial component is designed for general-purpose applications requiring stable capacitance and high voltage performance. The part is currently active in production with 953 units in stock. Identifying equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and address specific compliance or packaging requirements in production environments.

Substiute Parts

CDV19FF152JO3

Cornell Dubilier Electronics (CDE)In Stock: 1049CDV19FF152JO3 Datasheet

Current PartRFQ

CDV19FF152JO3F

Cornell Dubilier Electronics (CDE)In Stock: 1372CDV19FF152JO3F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CDV19FF152JO3 is determined by strict equivalence across the following critical parameters:

Electrical Parameters: Capacitance value (1500 pF), tolerance (±5%), and voltage rating (1 kV) must be identical. The mica dielectric material ensures stable performance across the operating temperature range of -55°C to 125°C.

Mechanical Parameters: The through-hole radial mounting configuration, lead spacing of 0.343" (8.70mm), and physical dimensions of 0.681" L x 0.272" W (17.30mm x 6.90mm) must match to ensure PCB compatibility and assembly process alignment.

Compliance Parameters: While the original part is RoHS non-compliant and REACH Affected, substitute parts may differ in these certifications based on manufacturing date and facility. The ECCN classification (EAR99) and HTSUS code (8532.29.0020) remain consistent across equivalent parts.

Parameter Comparison

Engineering Selection Recommendations

The CDV19FF152JO3F serves as a direct electrical and mechanical equivalent to the CDV19FF152JO3. Both parts are manufactured by Cornell Dubilier Electronics within the CDV19 series and maintain identical specifications for capacitance, voltage rating, tolerance, dielectric material, mounting configuration, and physical dimensions.

The primary distinction between these parts is compliance status. The CDV19FF152JO3F is ROHS3 Compliant and REACH Unaffected, whereas the original CDV19FF152JO3 is RoHS non-compliant and REACH Affected. Selection between these parts should be based on the regulatory requirements of the end application and target market. Applications requiring RoHS3 compliance or REACH compliance should specify the CDV19FF152JO3F. Applications without such compliance mandates may use either part interchangeably from an electrical and mechanical standpoint.

Both parts are active products with adequate inventory availability. The CDV19FF152JO3F currently has higher stock levels (1332 units) compared to the original part (953 units).

Frequently Asked Questions (FAQ)

Q: Can CDV19FF152JO3F be used as a direct replacement for CDV19FF152JO3?

A: Yes. The CDV19FF152JO3F is electrically and mechanically equivalent. Both parts have identical capacitance (1500 pF), tolerance (±5%), voltage rating (1 kV), dielectric material (mica), mounting type (through hole radial), lead spacing (0.343" / 8.70mm), and physical dimensions (0.681" L x 0.272" W). PCB layout and assembly processes require no modification.

Q: What is the difference between these two part numbers?

A: The primary differences are compliance certifications. The CDV19FF152JO3F is ROHS3 Compliant and REACH Unaffected, while the CDV19FF152JO3 is RoHS non-compliant and REACH Affected. All electrical and mechanical parameters are identical.

Q: Which part should I specify for a new design?

A: If your application or target market requires RoHS3 compliance or REACH compliance, specify CDV19FF152JO3F. If no compliance requirements apply, either part is suitable. Verify compliance requirements with your quality and regulatory teams before finalizing part selection.

Q: Are there any temperature or voltage derating considerations between these parts?

A: No. Both parts operate identically across the temperature range of -55°C to 125°C and are rated for 1 kV. No derating differences exist between the two part numbers.

Q: Can these parts be mixed in the same production batch?

A: From an electrical and mechanical standpoint, yes. However, compliance documentation and traceability records should reflect which part number was used in each assembly. Consult your quality management system and compliance documentation requirements before mixing part numbers in production.

Q: What is the lead spacing and how does it affect PCB design?

A: Lead spacing is 0.343" (8.70mm) for both parts. This dimension determines the distance between PCB pads and must match your circuit board layout. No design changes are required when substituting between these parts.