CDV19FF151JO3 Equivalent & Substitute Parts

Part Overview

The CDV19FF151JO3 is a 150 pF mica capacitor rated for 1 kV, manufactured by Cornell Dubilier Electronics (CDE) in the CDV19 series. This through-hole radial component is designed for general-purpose applications requiring high voltage performance and stable capacitance across the operating temperature range of -55°C to 125°C.

The CDV19FF151JO3 is classified as Active product status. Identification of equivalent and substitute parts becomes necessary when addressing supply chain constraints, compliance requirements, or inventory optimization while maintaining identical electrical and mechanical performance specifications.

Substiute Parts

CDV19FF151JO3

Cornell Dubilier Electronics (CDE)In Stock: 1020CDV19FF151JO3 Datasheet

Current PartRFQ

CDV19FF151JO3F

Cornell Dubilier Electronics (CDE)In Stock: 3255CDV19FF151JO3F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CDV19FF151JO3 is determined by strict equivalence across all critical electrical and mechanical parameters. The following parameters must remain identical for direct substitution:

• Capacitance value: 150 pF
• Tolerance: ±5%
• Voltage rating: 1 kV
• Dielectric material: Mica
• Operating temperature range: -55°C to 125°C
• Mounting type: Through Hole
• Package configuration: Radial
• Lead spacing: 0.343" (8.70 mm)
• Physical dimensions: 0.642" L x 0.189" W (16.30 mm x 4.80 mm)
• Maximum seated height: 0.500" (12.70 mm)

The CDV19FF151JO3F qualifies as a direct substitute based on complete alignment with these parameters. Variations in regulatory compliance status (RoHS, REACH) do not affect electrical or mechanical compatibility and represent alternative sourcing options for different application requirements.

Parameter Comparison

Engineering Selection Recommendations

Both CDV19FF151JO3 and CDV19FF151JO3F are Active status components from Cornell Dubilier Electronics and are electrically and mechanically identical. Selection between these parts is determined by regulatory and compliance requirements specific to the application or end-use market.

CDV19FF151JO3 is classified as RoHS non-compliant and REACH Affected. This part is suitable for applications where RoHS compliance is not mandated or where legacy component specifications are required.

CDV19FF151JO3F is classified as RoHS3 Compliant and REACH Unaffected. This part is suitable for applications requiring RoHS compliance or for markets with strict environmental regulations. The higher inventory availability (3183 Pcs vs. 972 Pcs) may also support supply chain continuity.

Both parts share identical ECCN (EAR99) and HTSUS (8532.29.0020) classifications, indicating equivalent export and tariff treatment.

Frequently Asked Questions (FAQ)

Q: Can CDV19FF151JO3F be used as a direct replacement for CDV19FF151JO3?

A: Yes. The CDV19FF151JO3F is a direct electrical and mechanical equivalent. All critical parameters including capacitance (150 pF), tolerance (±5%), voltage rating (1 kV), dielectric material (Mica), temperature range (-55°C to 125°C), mounting type (Through Hole), package configuration (Radial), lead spacing (0.343" / 8.70 mm), and physical dimensions are identical. The parts differ only in RoHS and REACH compliance status.

Q: What is the difference between CDV19FF151JO3 and CDV19FF151JO3F?

A: The primary difference is regulatory compliance. CDV19FF151JO3 is RoHS non-compliant and REACH Affected, while CDV19FF151JO3F is RoHS3 Compliant and REACH Unaffected. Electrical performance and physical specifications are identical.

Q: Which part should I select for a new design?

A: Selection depends on application requirements. For applications requiring RoHS compliance or serving markets with environmental regulations, select CDV19FF151JO3F. For applications without RoHS requirements, either part is acceptable. CDV19FF151JO3F offers higher inventory availability.

Q: Are the physical dimensions and lead spacing identical?

A: Yes. Both parts have identical dimensions (0.642" L x 0.189" W / 16.30 mm x 4.80 mm), lead spacing (0.343" / 8.70 mm), and maximum seated height (0.500" / 12.70 mm). They are pin-compatible and require no PCB layout modifications.

Q: Can these parts be used interchangeably in existing assemblies?

A: Yes. The CDV19FF151JO3 and CDV19FF151JO3F are fully interchangeable from electrical, mechanical, and dimensional perspectives. No circuit modifications or PCB rework is required.

Q: What is the operating temperature range for both parts?

A: Both parts operate across the identical temperature range of -55°C to 125°C, ensuring stable capacitance performance across all specified conditions.