CDV16FF152JO3 Mica Capacitor 1500pF 1kV Radial Equivalent & Substitute Parts

Part Overview

The CDV16FF152JO3 is a 1500 pF mica capacitor manufactured by Cornell Dubilier Electronics (CDE) rated for 1 kV operation in a radial through-hole configuration. This component is classified as Active product status with 879 units currently in stock. Mica capacitors in this specification are utilized in RF applications, high-frequency circuits, and precision filtering where low loss and high Q factor are required. Substitute parts may be necessary due to inventory constraints, regional availability, or compliance requirement alignment with specific manufacturing standards.

Substiute Parts

CDV16FF152JO3

Cornell Dubilier Electronics (CDE)In Stock: 989CDV16FF152JO3 Datasheet

Current PartRFQ

CDV16FF152JO3F

Cornell Dubilier Electronics (CDE)In Stock: 943CDV16FF152JO3F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CDV16FF152JO3 is determined by strict equivalence across the following parameters:

Critical Matching Parameters:

• Capacitance value: 1500 pF
• Tolerance: ±5%
• Voltage rating: 1 kV
• Dielectric material: Mica
• Operating temperature range: -55°C to 150°C
• Mounting type: Through Hole
• Package configuration: Radial
• Lead spacing: 0.234" (5.94mm)
• Maximum seated height: 0.500" (12.70mm)
• Series designation: CDV16

The substitute part CDV16FF152JO3F meets all critical matching parameters and is manufactured by the same supplier (Cornell Dubilier Electronics). The primary distinction between the main part and substitute relates to regulatory compliance status rather than electrical or mechanical performance.

Parameter Comparison

Engineering Selection Recommendations

CDV16FF152JO3 is suitable for applications where RoHS non-compliance is acceptable and REACH-affected material sourcing is permissible. This part maintains full electrical and mechanical equivalence with the substitute option.

CDV16FF152JO3F is the appropriate selection for designs requiring ROHS3 compliance and REACH-unaffected component sourcing. This variant is functionally and mechanically identical to the primary part and is recommended for new designs targeting modern regulatory frameworks. Both parts carry the same ECCN (EAR99) and HTSUS (8532.29.0020) classifications.

Selection between these two parts should be based solely on regulatory compliance requirements applicable to the end application and manufacturing jurisdiction. No electrical performance difference exists between the two options.

Frequently Asked Questions (FAQ)

Q: Are CDV16FF152JO3 and CDV16FF152JO3F electrically interchangeable?

A: Yes. Both parts are 1500 pF ±5% mica capacitors rated for 1 kV operation with identical electrical characteristics, operating temperature range (-55°C to 150°C), and RF performance specifications (High Q, Low Loss).

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. Both parts share identical mechanical specifications: radial through-hole mounting, 0.234" (5.94mm) lead spacing, 0.500" (12.70mm) maximum seated height, and 0.461" L x 0.181" W (11.70mm x 4.60mm) body dimensions. No PCB layout modifications are required.

Q: What is the primary difference between CDV16FF152JO3 and CDV16FF152JO3F?

A: The primary difference is regulatory compliance status. CDV16FF152JO3F is ROHS3 compliant and REACH unaffected, while CDV16FF152JO3 is RoHS non-compliant and REACH affected. Electrical and mechanical performance are identical.

Q: Which part should be selected for new product designs?

A: Selection depends on applicable regulatory requirements. For designs subject to ROHS3 and REACH compliance mandates, CDV16FF152JO3F is the appropriate choice. For applications without these compliance requirements, either part is acceptable based on availability.

Q: Are both parts currently available?

A: Yes. CDV16FF152JO3 has 879 units in stock, and CDV16FF152JO3F has 842 units in stock, both classified as new original inventory.

Q: Do these capacitors require any special handling or storage considerations?

A: Both parts carry Moisture Sensitivity Level (MSL) rating of 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.