CDV16FF131JO3 Mica Capacitor - Equivalent & Substitute Parts

Part Overview

The CDV16FF131JO3 is a 130 pF mica capacitor rated for 1 kV operation, manufactured by Cornell Dubilier Electronics (CDE). This component is classified as active and currently in production. Mica capacitors of this specification are essential in RF circuits and high-frequency applications requiring low-loss, high-Q characteristics. Alternative part numbers within the same product family may be necessary due to inventory availability, compliance requirements, or end-of-life considerations.

Substiute Parts

CDV16FF131JO3

Cornell Dubilier Electronics (CDE)In Stock: 1201CDV16FF131JO3 Datasheet

Current PartRFQ

CDV16FF131JO3F

Cornell Dubilier Electronics (CDE)In Stock: 1210CDV16FF131JO3F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CDV16FF131JO3 is determined by exact correspondence across the following critical parameters:

• Capacitance: 130 pF (no tolerance deviation acceptable)
• Tolerance: ±5%
• Voltage Rating: 1 kV (minimum)
• Dielectric Material: Mica
• Operating Temperature Range: -55°C to 150°C (minimum required)
• Mounting Type: Through Hole
• Package Configuration: Radial
• Lead Spacing: 0.234" (5.94 mm)
• Physical Dimensions: 0.429" L x 0.150" W, Height 0.461" maximum

Parts meeting all these criteria are classified as direct functional equivalents and may be selected based on availability, compliance status, and supply chain requirements.

Parameter Comparison

Engineering Selection Recommendations

Both CDV16FF131JO3 and CDV16FF131JO3F are electrically and mechanically identical. Selection between these parts should be based on the following considerations:

CDV16FF131JO3F is the preferred selection when product compliance requirements mandate:

• RoHS3 compliance (ROHS3 Compliant vs. RoHS Non-Compliant)
• REACH unaffected status (REACH Unaffected vs. REACH Affected)

CDV16FF131JO3 remains suitable for applications without mandatory compliance constraints and where inventory availability is prioritized.

Both parts are active products from the same manufacturer and series, ensuring continued production support and supply chain reliability.

Frequently Asked Questions (FAQ)

Q: Can CDV16FF131JO3F be used as a drop-in replacement for CDV16FF131JO3?

A: Yes. Both parts share identical electrical specifications (130 pF, ±5%, 1 kV) and mechanical specifications (radial, through-hole, identical dimensions and lead spacing). The CDV16FF131JO3F provides additional compliance benefits without electrical or mechanical trade-offs.

Q: What is the difference between these two part numbers?

A: The parts are functionally equivalent. The primary differences are in regulatory compliance: CDV16FF131JO3F is RoHS3 compliant and REACH unaffected, while CDV16FF131JO3 is RoHS non-compliant and REACH affected. No electrical or thermal performance difference exists.

Q: Are the physical dimensions and lead spacing identical?

A: Yes. Both parts have identical dimensions (0.429" L x 0.150" W, height 0.461" max) and lead spacing (0.234" / 5.94 mm), ensuring PCB layout compatibility without modification.

Q: Which part should be specified for new designs?

A: CDV16FF131JO3F is recommended for new designs, as it incorporates current RoHS3 compliance and REACH compliance status, supporting long-term product compliance and supply chain continuity.

Q: Can these parts be used interchangeably in existing applications?

A: Yes. Substitution is direct and transparent due to complete electrical and mechanical equivalence. No circuit redesign or PCB layout modification is required.