CDSH6-16-G Equivalent & Substitute Parts

Part Overview

The CDSH6-16-G is a general-purpose diode array manufactured by Comchip Technology, featuring two independent diodes rated for 75 V DC reverse voltage and 200 mA average rectified current per diode. This component is packaged in SOT-563 and SOT-666 surface mount configurations and is classified as obsolete. Due to its obsolete product status, identifying equivalent and substitute parts is necessary for ongoing design support, production continuity, and component sourcing in applications requiring this diode array specification.

Substiute Parts

CDSH6-16-G

Comchip TechnologyIn Stock: 861CDSH6-16-G Datasheet

Current PartRFQ

CDSH6-16-HF

Comchip TechnologyIn Stock: 79081CDSH6-16-HF Datasheet

DirectRFQ

BAS16V-7

Diodes IncorporatedIn Stock: 6992BAS16V-7 Datasheet

Parametric EquivalentRFQ

BAS16V-TP

Micro Commercial CoIn Stock: 3912BAS16V-TP Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CDSH6-16-G are qualified based on matching the following critical electrical and mechanical parameters:

• Diode Configuration: 2 Independent diodes
• Voltage - DC Reverse (Vr) (Max): 75 V
• Current - Average Rectified (Io) (per Diode): 200 mA
• Voltage - Forward (Vf) (Max) @ If: 1.25 V @ 150 mA
• Reverse Recovery Time (trr): 4 ns
• Current - Reverse Leakage @ Vr: 1 µA @ 75 V
• Operating Temperature - Junction: 150°C (minimum)
• Mounting Type: Surface Mount
• Package / Case: SOT-563, SOT-666
• Supplier Device Package: SOT-563
• Technology: Standard
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

All substitute parts listed meet these parameters and are therefore electrically and mechanically compatible with the CDSH6-16-G in applications requiring this diode array specification.

Parameter Comparison

Engineering Selection Recommendations

CDSH6-16-HF is the primary direct substitute for the obsolete CDSH6-16-G. Both parts are manufactured by Comchip Technology and share identical electrical specifications and packaging. The CDSH6-16-HF maintains active product status with significantly higher inventory availability (79,069 pieces), ensuring reliable sourcing for production and design support applications.

BAS16V-7 (Diodes Incorporated) and BAS16V-TP (Micro Commercial Co) are parametric equivalents that meet all electrical and mechanical requirements of the CDSH6-16-G. Both parts feature extended operating temperature ranges (-65°C ~ 150°C) compared to the main part specification and are supplied in Tape & Reel packaging. These alternatives provide additional sourcing flexibility from alternative manufacturers while maintaining full electrical compatibility.

All substitute parts carry ROHS3 compliance and MSL 1 (Unlimited) ratings, ensuring compatibility with standard manufacturing and storage processes.

Frequently Asked Questions (FAQ)

Q: Can CDSH6-16-HF be used as a direct replacement for CDSH6-16-G?

A: Yes. CDSH6-16-HF is a direct substitute manufactured by the same supplier (Comchip Technology) with identical electrical parameters, package configuration, and compliance certifications. The primary difference is product status: CDSH6-16-HF is active, while CDSH6-16-G is obsolete.

Q: What is the difference between CDSH6-16-HF and the BAS16V series substitutes?

A: CDSH6-16-HF is a direct Comchip Technology part with identical specifications. BAS16V-7 and BAS16V-TP are parametric equivalents from alternative manufacturers (Diodes Incorporated and Micro Commercial Co, respectively). All three meet the electrical requirements of the CDSH6-16-G. The BAS16V series parts offer extended operating temperature ranges (-65°C ~ 150°C) and are supplied in Tape & Reel packaging.

Q: Are the substitute parts compatible with existing PCB designs for CDSH6-16-G?

A: Yes. All substitute parts use identical SOT-563 package and SOT-666 case configurations with matching pin assignments and mechanical dimensions. No PCB layout modifications are required.

Q: Do all substitute parts meet RoHS compliance requirements?

A: Yes. CDSH6-16-HF, BAS16V-7, and BAS16V-TP are all ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity ratings.

Q: What is the difference in packaging between CDSH6-16-HF and the BAS16V alternatives?

A: CDSH6-16-HF packaging is not specified in the available data. BAS16V-7 and BAS16V-TP are supplied in Tape & Reel (TR) format. Packaging format does not affect electrical performance or PCB compatibility; it relates to order quantity and handling procedures.

Q: Can BAS16V-7 and BAS16V-TP be used interchangeably?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, package configurations, and compliance certifications. Selection between them depends on supplier availability and procurement preferences.