CDCLVD110VF Equivalent & Substitute Parts

Part Overview

The CDCLVD110VF is a Clock Fanout Buffer (Distribution), Multiplexer IC manufactured by Texas Instruments, configured as a 2:10 LVDS clock distribution device operating at 1.1 GHz maximum frequency. This device is classified as Not For New Designs, indicating it has reached end-of-life status. Finding equivalent and substitute parts is necessary for ongoing system support, design revisions, and procurement continuity when original inventory becomes unavailable.

Substiute Parts

CDCLVD110VF

Texas InstrumentsIn Stock: 1366CDCLVD110VF Datasheet

Current PartRFQ

ADN4670BSTZ

Analog Devices Inc.In Stock: 856ADN4670BSTZ Datasheet

DirectRFQ

ADN4670BSTZ-REEL7

Analog Devices Inc.In Stock: 1003ADN4670BSTZ-REEL7 Datasheet

DirectRFQ

853S111AYILF

Renesas Electronics CorporationIn Stock: 1415853S111AYILF Datasheet

MFR RecommendedRFQ

M100LVEP111FATWG

onsemiIn Stock: 1476M100LVEP111FATWG Datasheet

MFR RecommendedRFQ

MC100LVEP111FAG

onsemiIn Stock: 2675MC100LVEP111FAG Datasheet

MFR RecommendedRFQ

MC100LVEP111FARG

onsemiIn Stock: 31267MC100LVEP111FARG Datasheet

MFR RecommendedRFQ

CDCLVD110AVF

Texas InstrumentsIn Stock: 7205CDCLVD110AVF Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CDCLVD110VF are categorized based on the following substitution criteria:

Critical Parameters for Substitution:

• Input:Output Ratio: 2:10 (mandatory match)
• Differential Input/Output: Yes/Yes (mandatory match)
• Package / Case: 32-LQFP (mandatory match for PCB compatibility)
• Operating Temperature Range: -40°C ~ 85°C (mandatory match)
• Mounting Type: Surface Mount (mandatory match)

Flexible Parameters (allowing substitution with higher capability):

• Frequency - Max: 1.1 GHz minimum required; higher frequencies are acceptable
• Input Signal Type: LVDS minimum required; compatible signal types (ECL, HSTL, PECL, CML) are acceptable
• Output Signal Type: LVDS minimum required; compatible signal types (ECL, PECL) are acceptable
• Voltage - Supply: 2.375V ~ 2.625V minimum required; wider supply ranges are acceptable
• Product Status: Active products preferred over Not For New Designs

Substitute Categories:

1. Direct Manufacturer Equivalents - Same electrical specifications, different packaging or product status
2. Manufacturer Recommended Substitutes - Enhanced specifications (higher frequency, wider signal compatibility) with same form factor
3. Parametric Equivalents - Same base specifications from same manufacturer with different product status

Parameter Comparison

Engineering Selection Recommendations

Tier 1 - Recommended Direct Replacements:

CDCLVD110AVF (Texas Instruments) is the primary recommended substitute. This part maintains identical electrical specifications (1.1 GHz, LVDS input/output, 2.375V ~ 2.625V supply) and package form factor (32-LQFP) as the CDCLVD110VF. The critical advantage is Active product status, ensuring long-term availability and manufacturer support. MSL rating of 1 (Unlimited) matches the original part, eliminating moisture sensitivity concerns during storage and assembly. This part is suitable for direct PCB substitution without design modifications.

Tier 2 - Compatible Substitutes with Enhanced Specifications:

ADN4670BSTZ and ADN4670BSTZ-REEL7 (Analog Devices Inc.) provide equivalent 2:10 LVDS distribution at 1.1 GHz with Active product status. These parts maintain the same supply voltage range and operating temperature. The primary consideration is MSL rating of 3 (168 Hours), requiring controlled storage conditions. Packaging options include both Tray (ADN4670BSTZ) and Tape & Reel (ADN4670BSTZ-REEL7) for procurement flexibility.

MC100LVEP111FAG and MC100LVEP111FARG (onsemi) offer enhanced frequency capability (3 GHz) and expanded input signal compatibility (ECL, HSTL, LVDS, PECL). These parts support wider supply voltage range (2.375V ~ 3.8V) and maintain Active product status. MSL rating of 2 (1 Year) provides moderate moisture sensitivity. These substitutes are suitable when system design permits operation at higher frequencies or when broader signal compatibility is beneficial.

M100LVEP111FATWG (onsemi) provides 3 GHz operation with Tape & Reel packaging. Input compatibility includes ECL, HSTL, and PECL. This part is suitable for high-volume production environments requiring automated assembly.

853S111AYILF (Renesas Electronics Corporation) offers the highest frequency capability (2.5 GHz) with expanded input signal support (CML, LVDS, LVPECL, SSTL) and output flexibility (ECL, PECL). Supply voltage range extends to 3.465V. This part is suitable for applications requiring maximum frequency headroom or multi-signal-type compatibility.

Compliance and Certification:

All substitute parts maintain ROHS3 compliance and REACH Unaffected status, matching the original CDCLVD110VF regulatory requirements. All parts are classified under HTSUS code 8542.39.0001 and ECCN EAR99, maintaining consistent export and tariff classification.

Frequently Asked Questions (FAQ)

Q: Can I use CDCLVD110AVF as a direct replacement for CDCLVD110VF?

A: Yes. CDCLVD110AVF is a parametric equivalent with identical electrical specifications and package form factor. The primary difference is product status: CDCLVD110AVF is Active, while CDCLVD110VF is Not For New Designs. No design modifications are required for substitution.

Q: What is the difference between ADN4670BSTZ and ADN4670BSTZ-REEL7?

A: Both parts are electrically identical with 2:10 LVDS distribution at 1.1 GHz. The difference is packaging: ADN4670BSTZ is supplied in Tray format, while ADN4670BSTZ-REEL7 is supplied in Tape & Reel format. Selection depends on procurement and assembly requirements.

Q: Can I use MC100LVEP111FARG instead of CDCLVD110VF?

A: Yes, with design considerations. MC100LVEP111FARG maintains the 2:10 ratio and 32-LQFP package but operates at 3 GHz (versus 1.1 GHz) with expanded signal compatibility. The part is electrically compatible when LVDS input/output is used. Higher frequency capability provides design margin but is not required for 1.1 GHz applications.

Q: What does MSL rating mean for component substitution?

A: MSL (Moisture Sensitivity Level) indicates how long a component can be stored in standard conditions before moisture absorption affects reliability. CDCLVD110VF has MSL 1 (Unlimited), while most substitutes have MSL 2 or 3. Higher MSL numbers require controlled storage (lower humidity, sealed packaging). Verify your storage and assembly processes support the MSL rating of selected substitutes.

Q: Are all substitute parts RoHS compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance, matching the original CDCLVD110VF. All parts are also REACH Unaffected, maintaining consistent regulatory compliance.

Q: Which substitute offers the best long-term availability?

A: CDCLVD110AVF (Texas Instruments) is recommended for long-term availability. It maintains Active product status from the original manufacturer with identical specifications. Analog Devices ADN4670BSTZ and onsemi MC100LVEP111 series also have Active status with established supply chains.

Q: Can I use 853S111AYILF if my system only requires 1.1 GHz operation?

A: Yes. 853S111AYILF operates at 2.5 GHz maximum, providing frequency margin above the 1.1 GHz requirement. The part is electrically compatible when LVDS input/output is used. The expanded frequency capability and multi-signal-type support (CML, LVDS, LVPECL, SSTL input; ECL, PECL output) provide design flexibility for future applications.

Q: What supply voltage range should I verify for substitutes?

A: The original CDCLVD110VF requires 2.375V ~ 2.625V. All listed substitutes support this range as a minimum. Some substitutes (MC100LVEP111 series, 853S111AYILF) support wider ranges (up to 3.8V or 3.465V). Verify your system power supply design accommodates the selected substitute's voltage requirements.