CDCL6010RGZR Equivalent & Substitute Parts

Part Overview

The CDCL6010RGZR is a Clock Synchronizer IC manufactured by Texas Instruments, designed for high-speed timing applications up to 1.25GHz. This device features a Phase-Locked Loop (PLL) with bypass capability, LVDS input, and CML output, operating across a supply voltage range of 1.7V to 1.9V. The component is classified as Active product status and is RoHS3 compliant. Substitute parts are identified when packaging or inventory requirements necessitate alternative sourcing while maintaining identical electrical and mechanical specifications.

Substiute Parts

CDCL6010RGZR

Texas InstrumentsIn Stock: 3051CDCL6010RGZR Datasheet

Current PartRFQ

CDCL6010RGZT

Texas InstrumentsIn Stock: 1526CDCL6010RGZT Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The CDCL6010RGZR and its identified substitute are classified as parametric equivalents based on strict alignment of electrical and mechanical specifications. Substitution eligibility is determined by the following critical parameters:

• Frequency maximum: 1.25GHz
• Input/Output signal types: LVDS input, CML output
• Input:Output ratio: 1:11
• Differential signaling: Yes for both input and output
• PLL configuration: Yes with Bypass capability
• Supply voltage range: 1.7V ~ 1.9V
• Operating temperature range: -40°C ~ 85°C
• Package type: 48-VFQFN Exposed Pad
• Physical dimensions: 48-VQFN (7x7)

The substitute part differs only in packaging format (Tape & Reel versus standard packaging), which does not affect electrical performance or functional compatibility in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Both the CDCL6010RGZR and CDCL6010RGZT maintain Active product status from Texas Instruments, ensuring continued manufacturing support and availability. Both components are RoHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for industrial and commercial applications.

Selection between these parts should be based on procurement and assembly requirements. The CDCL6010RGZR is supplied in standard packaging, while the CDCL6010RGZT is supplied in Tape & Reel format. Tape & Reel packaging is typically preferred for high-volume automated assembly operations, whereas standard packaging may be suitable for lower-volume or manual assembly scenarios. Both formats contain identical die and electrical characteristics.

Frequently Asked Questions (FAQ)

Q: Are CDCL6010RGZR and CDCL6010RGZT electrically identical?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, including frequency response, input/output signal types, supply voltage range, and operating temperature range. The only difference is packaging format.

Q: What is the difference between standard packaging and Tape & Reel (TR) packaging?

A: Tape & Reel packaging is a continuous strip format designed for automated pick-and-place assembly equipment. Standard packaging typically refers to individual or bulk packaging formats. The die and electrical performance are identical; the difference is in handling and assembly methodology.

Q: Can I substitute CDCL6010RGZT for CDCL6010RGZR in my design?

A: Yes, provided your assembly process can accommodate Tape & Reel format. The electrical and mechanical specifications are identical, and both parts are rated for the same operating conditions and temperature range.

Q: What does the 48-VQFN (7x7) package specification mean?

A: This indicates a Very Fine Pitch Quad Flat No-Lead package with 48 pins, measuring 7mm × 7mm. Both substitute parts use this identical package configuration.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical RoHS3 compliance and REACH unaffected status, meeting the same regulatory requirements for use in regulated industries and applications.