CDCE937PWRG4 Equivalent & Substitute Parts

Part Overview

The CDCE937PWRG4 is a PLL Clock Generator IC manufactured by Texas Instruments, designed for applications requiring programmable clock generation up to 230MHz. This device features a single PLL circuit with bypass capability, accepting LVCMOS or crystal inputs and delivering LVCMOS outputs with a 1:7 input-to-output ratio.

The CDCE937PWRG4 is currently discontinued at DiGi Electronics. For ongoing production and new designs, equivalent substitute parts with identical electrical and mechanical specifications are available to ensure design continuity and supply chain reliability.

Substiute Parts

CDCE937PWRG4

Texas InstrumentsIn Stock: 1105CDCE937PWRG4 Datasheet

Current PartRFQ

CDCE937PWR

Texas InstrumentsIn Stock: 8472CDCE937PWR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CDCE937PWRG4 is determined by strict equivalence across the following critical parameters:

• Maximum frequency: 230MHz
• Supply voltage range: 1.7V ~ 1.9V
• Operating temperature range: -40°C ~ 85°C
• Package type: 20-TSSOP (0.173", 4.40mm Width)
• Input configuration: LVCMOS, Crystal
• Output configuration: LVCMOS
• Number of circuits: 1
• Input-to-output ratio: 1:7
• PLL with bypass capability: Yes
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

The CDCE937PWR meets all these parameters and qualifies as a parametric equivalent. The primary distinction is packaging format and product status.

Parameter Comparison

Engineering Selection Recommendations

The CDCE937PWR is the direct parametric equivalent for the discontinued CDCE937PWRG4. Both devices share identical electrical specifications, package geometry, and compliance certifications (ROHS3, REACH Unaffected, EAR99 classification).

The CDCE937PWR maintains active product status with higher inventory availability (8408 Pcs vs. 1088 Pcs), ensuring supply chain continuity for new production and design revisions. Both parts are verified as DiGi-Electronics Programmable and carry MSL 1 (Unlimited) moisture sensitivity ratings, suitable for standard handling and storage conditions.

For applications currently using CDCE937PWRG4, direct substitution with CDCE937PWR requires no circuit modifications, PCB layout changes, or firmware adjustments.

Frequently Asked Questions (FAQ)

Q: Can CDCE937PWR be used as a direct replacement for CDCE937PWRG4?

A: Yes. Both parts are parametrically identical across all electrical and mechanical specifications. The CDCE937PWR is available in multiple packaging formats (Cut Tape and Digi-Reel) compared to the CDCE937PWRG4 Digi-Reel format, providing greater procurement flexibility.

Q: Are there any differences in pin configuration or package dimensions?

A: No. Both devices use the 20-TSSOP package with identical 0.173" width and 4.40mm body dimensions. Pin assignments and electrical characteristics are identical.

Q: What is the difference between the packaging formats?

A: CDCE937PWRG4 is supplied in Digi-Reel format. CDCE937PWR is available in both Cut Tape (CT) and Digi-Reel formats, allowing selection based on assembly process requirements and order quantities.

Q: Are both parts RoHS compliant?

A: Yes. Both CDCE937PWRG4 and CDCE937PWR are ROHS3 compliant and REACH unaffected, meeting environmental and regulatory requirements for industrial and commercial applications.

Q: What is the moisture sensitivity level for these parts?

A: Both parts carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Standard handling and storage procedures apply without special desiccant or humidity control requirements.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. No circuit modifications, PCB layout changes, or design revisions are required when substituting CDCE937PWR for CDCE937PWRG4. Both parts are pin-compatible and electrically equivalent.