CDCE72010RGCTG4 Equivalent & Substitute Parts

Part Overview

The CDCE72010RGCTG4 is a Clock Synchronizer, Fanout (Distribution), and Jitter Cleaner IC manufactured by Texas Instruments. This device operates at frequencies up to 1.5GHz and is housed in a 64-VFQFN Exposed Pad surface mount package. The part is currently discontinued at DiGi Electronics, making identification of equivalent substitute parts essential for ongoing design support and procurement.

Key Parameters

Parameter	Value
Manufacturer	Texas Instruments
Category	Clock/Timing
Type	Clock Synchronizer, Fanout (Distribution), Jitter Cleaner
Frequency - Max	1.5GHz
Input Signals	LVCMOS, LVDS, LVPECL
Output Signals	LVCMOS, LVDS, LVPECL
Number of Circuits	1
Ratio - Input:Output	3:20
Differential - Input:Output	Yes/Yes
Voltage - Supply	3V ~ 3.6V
Operating Temperature	-40°C ~ 85°C
Package / Case	64-VFQFN Exposed Pad
Supplier Device Package	64-VQFN (9x9)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	3 (168 Hours)

Substitute Part Grouping Explanation

Substitute parts for the CDCE72010RGCTG4 are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The following parameters determine substitution eligibility:

Frequency maximum rating: 1.5GHz
Input/Output signal types: LVCMOS, LVDS, LVPECL
Input:Output ratio: 3:20
Differential input and output capability: Yes/Yes
Supply voltage range: 3V ~ 3.6V
Operating temperature range: -40°C ~ 85°C
Package type: 64-VFQFN Exposed Pad (9x9)
Surface mount mounting type
RoHS3 compliance
MSL rating: 3 (168 Hours)

All substitute parts listed below meet these exact specifications and are manufactured by Texas Instruments under the CDCE72010 base product number.

Parameter Comparison

Parameter	CDCE72010RGCTG4	CDCE72010RGCR	CDCE72010RGCT
Manufacturer	Texas Instruments	Texas Instruments	Texas Instruments
Type	Clock Synchronizer, Fanout (Distribution), Jitter Cleaner	Clock Synchronizer, Fanout (Distribution), Jitter Cleaner	Clock Synchronizer, Fanout (Distribution), Jitter Cleaner
Frequency - Max	1.5GHz	1.5GHz	1.5GHz
Input Signals	LVCMOS, LVDS, LVPECL	LVCMOS, LVDS, LVPECL	LVCMOS, LVDS, LVPECL
Output Signals	LVCMOS, LVDS, LVPECL	LVCMOS, LVDS, LVPECL	LVCMOS, LVDS, LVPECL
Number of Circuits	1	1	1
Ratio - Input:Output	3:20	3:20	3:20
Differential - Input:Output	Yes/Yes	Yes/Yes	Yes/Yes
Voltage - Supply	3V ~ 3.6V	3V ~ 3.6V	3V ~ 3.6V
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C
Package / Case	64-VFQFN Exposed Pad	64-VFQFN Exposed Pad	64-VFQFN Exposed Pad
Supplier Device Package	64-VQFN (9x9)	64-VQFN (9x9)	64-VQFN (9x9)
Mounting Type	Surface Mount	Surface Mount	Surface Mount
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	3 (168 Hours)	3 (168 Hours)	3 (168 Hours)
Product Status	Discontinued at DiGi Electronics	Active	Active

Engineering Selection Recommendations

The CDCE72010RGCTG4 is discontinued at DiGi Electronics. Both substitute parts—CDCE72010RGCR and CDCE72010RGCT—are active products with full parametric equivalence to the original part number.

CDCE72010RGCR offers 8,294 pieces in current inventory and maintains active product status with all required certifications including ROHS3 compliance and REACH unaffected status.

CDCE72010RGCT offers 2,254 pieces in current inventory and maintains active product status with identical compliance certifications.

Both substitutes are manufactured by Texas Instruments under the same base product number (CDCE72010) and are packaged identically in 64-VQFN (9x9) surface mount configuration. Selection between these two substitutes may be based on inventory availability and procurement lead times.

Frequently Asked Questions (FAQ)

Q: Can CDCE72010RGCR or CDCE72010RGCT be used as direct replacements for CDCE72010RGCTG4?

A: Yes. Both parts are parametrically equivalent across all electrical and mechanical specifications, including frequency rating, signal types, supply voltage, operating temperature range, package configuration, and compliance certifications.

Q: What is the difference between CDCE72010RGCR and CDCE72010RGCT?

A: Both parts are parametrically identical. The difference lies in packaging designation (suffix "R" versus "T") and current inventory levels. CDCE72010RGCR has 8,294 pieces available; CDCE72010RGCT has 2,254 pieces available.

Q: Are the package dimensions identical for all three part numbers?

A: Yes. All three parts use the 64-VFQFN Exposed Pad package with 9x9mm dimensions and are surface mount devices. PCB layout and footprint compatibility is maintained across all three part numbers.

Q: Do all substitute parts meet the same compliance requirements?

A: Yes. CDCE72010RGCR and CDCE72010RGCT both carry ROHS3 compliance, REACH unaffected status, and MSL rating of 3 (168 Hours), matching the original CDCE72010RGCTG4 specifications.

Q: What is the significance of the product status difference?

A: CDCE72010RGCTG4 is discontinued at DiGi Electronics, meaning it is no longer actively stocked or supported. CDCE72010RGCR and CDCE72010RGCT are active products with ongoing manufacturing and distribution support from Texas Instruments.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message