CDBV6-54AD-G Equivalent & Substitute Parts

Part Overview

The CDBV6-54AD-G is a Schottky diode array manufactured by Comchip Technology, configured as a 2 Pair Common Anode device rated for 30 V DC reverse voltage and 200 mA average rectified current per diode. The component is housed in a 6-TSSOP (SC-88, SOT-363) surface mount package and is classified as Active product status. Substitute parts are identified when equivalent electrical and mechanical parameters are required for design flexibility, supply chain continuity, or inventory optimization.

Substiute Parts

CDBV6-54AD-G

Comchip TechnologyIn Stock: 1018CDBV6-54AD-G Datasheet

Current PartRFQ

BAT54ADW-7-F

Diodes IncorporatedIn Stock: 1247BAT54ADW-7-F Datasheet

Parametric EquivalentRFQ

BAT54ADW-TP

Micro Commercial CoIn Stock: 362151BAT54ADW-TP Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CDBV6-54AD-G are identified based on strict parametric equivalence across the following critical criteria:

Electrical Parameters:

• Diode configuration (2 Pair Common Anode)
• Schottky technology classification
• Maximum DC reverse voltage: 30 V
• Average rectified current per diode: 200 mA (DC)
• Forward voltage: 1 V @ 100 mA
• Reverse recovery time: 5 ns
• Reverse leakage current: 2 µA @ 25 V
• Junction temperature range: -65°C ~ 125°C

Mechanical & Compliance Parameters:

• Package type: 6-TSSOP, SC-88, SOT-363
• Surface mount mounting type
• RoHS3 compliance
• MSL Level 1 (Unlimited)

All substitute parts listed below meet these parameters identically and are classified as Active product status.

Parameter Comparison

Engineering Selection Recommendations

All three components listed—CDBV6-54AD-G, BAT54ADW-7-F, and BAT54ADW-TP—are parametrically equivalent and suitable for direct substitution in applications requiring a 30 V, 200 mA Schottky diode array in SOT-363 package configuration.

Compliance & Certification: All parts are ROHS3 compliant, REACH unaffected, and classified under ECCN EAR99. All maintain MSL Level 1 (Unlimited) moisture sensitivity rating, indicating no special storage or handling requirements.

Product Availability:

• CDBV6-54AD-G: 944 Pcs in stock
• BAT54ADW-7-F: 1,202 Pcs in stock
• BAT54ADW-TP: 362,100 Pcs in stock

Selection between these parts should be based on procurement lead time, supplier preference, and inventory availability rather than electrical or mechanical performance differences.

Frequently Asked Questions (FAQ)

Q: Can BAT54ADW-7-F or BAT54ADW-TP be used as direct replacements for CDBV6-54AD-G?

A: Yes. All three parts are parametrically equivalent across electrical specifications (30 V reverse voltage, 200 mA current rating, 1 V forward voltage, 5 ns recovery time) and mechanical characteristics (SOT-363 package, surface mount). No circuit redesign or board layout modification is required.

Q: Are there any differences in package dimensions between these parts?

A: No. All three components use the 6-TSSOP, SC-88, SOT-363 package designation, which specifies identical physical dimensions and pin configuration. PCB footprints are interchangeable.

Q: What is the significance of the 2 Pair Common Anode configuration?

A: This configuration indicates the diode array contains two pairs of diodes, with each pair sharing a common anode connection. This internal topology must match the circuit design. All listed substitutes maintain this identical configuration.

Q: Do these parts require different handling or storage procedures?

A: No. All parts are classified as MSL Level 1 (Unlimited), indicating no moisture sensitivity restrictions. Standard ESD precautions for surface mount components apply uniformly across all three parts.

Q: Are there compliance or regulatory differences between manufacturers?

A: No. All three parts are ROHS3 compliant, REACH unaffected, and carry identical ECCN (EAR99) and HTSUS (8541.10.0070) classifications.