CD74HCT4316M96G4 Equivalent & Substitute Parts

Part Overview

The CD74HCT4316M96G4 is a 4-circuit IC switch with SPST-NO configuration, manufactured by Texas Instruments. This interface component operates as a 1:1 multiplexer/demultiplexer with 170Ohm on-state resistance and is housed in a 16-SOIC surface mount package. The part is currently discontinued at DiGi Electronics, making equivalent and substitute parts necessary for ongoing design support and production requirements.

Substiute Parts

CD74HCT4316M96G4
Texas InstrumentsIn Stock: 885CD74HCT4316M96G4 Datasheet
CD74HCT4316M96G4
Current Part
CD74HCT4316M96
Texas InstrumentsIn Stock: 4301CD74HCT4316M96 Datasheet
CD74HCT4316M96
MFR Recommended
CD74HCT4316MT
Texas InstrumentsIn Stock: 1055CD74HCT4316MT Datasheet
CD74HCT4316MT
Parametric Equivalent
74HCT4316D,118
Nexperia USA Inc.In Stock: 334474HCT4316D,118 Datasheet
74HCT4316D,118
MFR Recommended
NLV74HC4316ADR2G
onsemiIn Stock: 3578NLV74HC4316ADR2G Datasheet
NLV74HC4316ADR2G
MFR Recommended

Key Parameters

Parameter Value
Manufacturer Part Number CD74HCT4316M96G4
Manufacturer Texas Instruments
Switch Circuit Type SPST - NO
Number of Circuits 4
Multiplexer/Demultiplexer Configuration 1:1
On-State Resistance (Max) 170Ohm
Channel-to-Channel Matching (ΔRon) 5Ohm
Voltage - Supply, Single (V+) 4.5V ~ 5.5V
Voltage - Supply, Dual (V±) ±1V ~ 5V
Switch Time (Ton, Toff) (Max) 37ns, 37ns
-3dB Bandwidth 200MHz
Channel Capacitance (CS(off), CD(off)) 5pF
Current - Leakage (IS(off)) (Max) 100nA
Operating Temperature -55°C ~ 125°C (TA)
Package / Case 16-SOIC (0.154", 3.90mm Width)
Mounting Type Surface Mount
RoHS Status ROHS3 Compliant
Moisture Sensitivity Level (MSL) 1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the CD74HCT4316M96G4 is determined by the following critical parameters:

Primary Substitution Criteria:

  • Switch circuit type: SPST - NO
  • Number of circuits: 4
  • Multiplexer/Demultiplexer configuration: 1:1
  • Package type: 16-SOIC surface mount
  • Supply voltage compatibility: 4.5V ~ 5.5V (single) or ±1V ~ 5V (dual)
  • Operating temperature range: -55°C ~ 125°C minimum
  • RoHS3 compliance and MSL 1 rating

Secondary Compatibility Parameters:

  • On-state resistance (170Ohm nominal, with tolerance variations acceptable)
  • Channel-to-channel matching (ΔRon)
  • Switch timing characteristics (Ton, Toff)
  • Bandwidth performance (-3dB)
  • Leakage current specifications

Parts meeting all primary criteria are classified as direct substitutes. Parts with variations in secondary parameters are classified as parametric equivalents and require application-level verification.

Parameter Comparison

Parameter CD74HCT4316M96G4 (Main) CD74HCT4316M96 CD74HCT4316MT 74HCT4316D,118 NLV74HC4316ADR2G
Manufacturer Texas Instruments Texas Instruments Texas Instruments Nexperia USA Inc. onsemi
Switch Circuit SPST - NO SPST - NO SPST - NO SPST - NO -
Number of Circuits 4 4 4 4 4
Multiplexer/Demultiplexer 1:1 1:1 1:1 1:1 1:1
On-State Resistance (Max) 170Ohm 170Ohm 170Ohm 135Ohm 90Ohm
Channel-to-Channel Matching (ΔRon) 5Ohm 5Ohm 5Ohm 6Ohm -
Voltage - Supply, Single (V+) 4.5V ~ 5.5V 4.5V ~ 5.5V 4.5V ~ 5.5V 4.5V ~ 5.5V 2V ~ 6V
Voltage - Supply, Dual (V±) ±1V ~ 5V ±1V ~ 5V ±1V ~ 5V ±1V ~ 5V ±2V ~ 6V
Switch Time Ton (Max) 37ns 37ns 37ns 42ns -
Switch Time Toff (Max) 37ns 37ns 37ns 34ns -
-3dB Bandwidth 200MHz 200MHz 200MHz 160MHz 160MHz
Channel Capacitance (CS(off), CD(off)) 5pF 5pF 5pF 4.6pF -
Current - Leakage (IS(off)) (Max) 100nA 100nA 100nA 100nA -
Operating Temperature -55°C ~ 125°C -55°C ~ 125°C -55°C ~ 125°C -40°C ~ 125°C -55°C ~ 125°C
Package / Case 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Mounting Type Surface Mount Surface Mount Surface Mount Surface Mount Surface Mount
Product Status Discontinued at DiGi Electronics Last Time Buy Discontinued at DiGi Electronics Active Obsolete
RoHS Status ROHS3 Compliant ROHS3 Compliant ROHS3 Compliant ROHS3 Compliant ROHS3 Compliant

Engineering Selection Recommendations

CD74HCT4316M96 (MFR Recommended) This Texas Instruments part is the direct equivalent with identical electrical specifications to the main part. It maintains 170Ohm on-state resistance, 5Ohm channel matching, and 200MHz bandwidth. Current product status is Last Time Buy, indicating limited availability. This part is suitable for direct replacement in existing designs.

CD74HCT4316MT (Parametric Equivalent) This Texas Instruments variant provides identical electrical performance to the main part across all critical parameters. Product status is Discontinued at DiGi Electronics. Inventory availability is 1013 units. This part is electrically interchangeable but may have limited long-term supply.

74HCT4316D,118 (Nexperia USA Inc.) This part maintains the same 4-circuit SPST-NO configuration and 1:1 multiplexer architecture in 16-SOIC packaging. On-state resistance is 135Ohm (lower than the main part), with 6Ohm channel matching. Bandwidth is reduced to 160MHz. Operating temperature minimum is -40°C (versus -55°C for the main part). Product status is Active with 3313 units in stock. This part is suitable for applications where lower on-state resistance is beneficial and the narrower temperature range is acceptable.

NLV74HC4316ADR2G (onsemi) This part provides a 4-circuit 1:1 multiplexer in 16-SOIC packaging with significantly lower on-state resistance of 90Ohm. Supply voltage range is broader (2V ~ 6V single, ±2V ~ 6V dual). The part carries AEC-Q100 automotive qualification. Product status is Obsolete. This part is suitable only for applications where the lower on-state resistance is required and long-term supply is not critical.

Frequently Asked Questions (FAQ)

Q: Can CD74HCT4316M96 be used as a direct replacement for CD74HCT4316M96G4? A: Yes. CD74HCT4316M96 is the direct equivalent with identical electrical specifications, package type, and supply voltage requirements. The primary difference is packaging format (Tape & Reel versus individual unit) and product status (Last Time Buy versus Discontinued).

Q: What is the difference between CD74HCT4316M96 and 74HCT4316D,118? A: Both are 4-circuit SPST-NO switches in 16-SOIC packages. The Nexperia part (74HCT4316D,118) has lower on-state resistance (135Ohm versus 170Ohm), reduced bandwidth (160MHz versus 200MHz), and a narrower operating temperature range (-40°C to 125°C versus -55°C to 125°C). The Nexperia part is currently Active in production.

Q: Is NLV74HC4316ADR2G compatible with the original CD74HCT4316M96G4? A: NLV74HC4316ADR2G provides the same 4-circuit 1:1 multiplexer configuration and 16-SOIC package. However, it has significantly different electrical characteristics: 90Ohm on-state resistance (versus 170Ohm), broader supply voltage range, and automotive qualification. The part is obsolete. Compatibility depends on application-specific requirements for on-state resistance and supply voltage.

Q: What packaging options are available for these substitutes? A: All substitute parts are available in 16-SOIC surface mount packages with 0.154" (3.90mm) width. CD74HCT4316M96 is supplied in Tape & Reel format. Packaging format does not affect electrical compatibility.

Q: Which substitute part has the best current availability? A: 74HCT4316D,118 (Nexperia) has the highest inventory with 3313 units in stock and Active product status. CD74HCT4316M96 has 4194 units available but is in Last Time Buy status. NLV74HC4316ADR2G has 3469 units but is Obsolete.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed substitute parts are ROHS3 Compliant with MSL 1 (Unlimited) moisture sensitivity rating, matching the compliance profile of the original CD74HCT4316M96G4.

Request Quote (Ships tomorrow)