CD74HCT4060M96 Equivalent & Substitute Parts

Part Overview

The CD74HCT4060M96 is a 14-bit binary counter logic IC manufactured by Texas Instruments, housed in a 16-SOIC surface mount package. This counter operates with negative edge triggering and asynchronous reset functionality, designed for applications requiring frequency division and counting operations in digital systems. The part is currently in active production status with 838 units in stock.

Substitute parts become necessary due to supply constraints, end-of-life transitions, or design flexibility requirements across manufacturing batches. The parts listed below maintain functional equivalence through identical or superior electrical and mechanical specifications.

Substiute Parts

CD74HCT4060M96

Texas InstrumentsIn Stock: 913CD74HCT4060M96 Datasheet

Current PartRFQ

CD74HCT4060MT

Texas InstrumentsIn Stock: 1635CD74HCT4060MT Datasheet

Parametric EquivalentRFQ

74HCT4060D,653

Nexperia USA Inc.In Stock: 166774HCT4060D,653 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CD74HCT4060M96 is determined by the following critical parameters:

Functional Parameters: Logic type (Binary Counter), bit width (14-bit), element count (1), direction (Up), trigger type (Negative Edge), and reset method (Asynchronous) must remain identical across all substitutes.

Electrical Parameters: Supply voltage range (4.5 V ~ 5.5 V) and operating temperature range (-55°C ~ 125°C) establish the baseline compatibility envelope. Count rate specifications may exceed the minimum 30 MHz requirement without affecting substitutability.

Mechanical Parameters: Package type (16-SOIC), mounting method (Surface Mount), and physical dimensions (0.154", 3.90mm Width) must match for PCB compatibility.

Compliance Parameters: RoHS3 compliance and MSL rating (1) ensure environmental and handling consistency.

The substitute parts listed below satisfy all these criteria while maintaining the 74HCT4060 base product number designation.

Parameter Comparison

Engineering Selection Recommendations

CD74HCT4060MT (Texas Instruments): This part maintains identical electrical and mechanical specifications to the CD74HCT4060M96. However, the product status is listed as Last Time Buy, indicating this part is in end-of-life transition. Selection of this substitute should be limited to applications where existing inventory availability is prioritized over long-term supply assurance.

74HCT4060D,653 (Nexperia USA Inc.): This part is manufactured by Nexperia USA Inc. and maintains Active product status. It provides superior count rate performance at 88 MHz compared to the 30 MHz specification of the main part, ensuring enhanced operational headroom. The operating temperature range is -40°C ~ 125°C, which is narrower at the lower bound (-40°C versus -55°C) but remains suitable for most industrial and commercial applications. This part is recommended for new designs and applications requiring long-term supply continuity.

All three parts maintain ROHS3 compliance and MSL rating 1, ensuring consistent environmental and handling requirements across the supply chain.

Frequently Asked Questions (FAQ)

Q: Can CD74HCT4060MT be used as a direct replacement for CD74HCT4060M96?

A: Yes. Both parts share identical functional, electrical, and mechanical specifications. The primary distinction is product status; CD74HCT4060MT is in Last Time Buy phase, meaning future availability may be limited.

Q: Is 74HCT4060D,653 from Nexperia compatible with designs specified for CD74HCT4060M96?

A: Yes. The 74HCT4060D,653 maintains all critical functional parameters and package specifications. The count rate of 88 MHz exceeds the 30 MHz requirement, providing additional performance margin. The operating temperature range begins at -40°C instead of -55°C; applications requiring operation below -40°C must use the Texas Instruments variants.

Q: What is the significance of the 74HCT base product number across these parts?

A: The 74HCT designation indicates these are high-speed CMOS logic counters conforming to the same functional standard. All listed parts implement the same 14-bit binary counter architecture with identical pin configurations and logic behavior, enabling direct substitution at the circuit level.

Q: Are there packaging differences between these substitutes?

A: No. All three parts use the 16-SOIC surface mount package with identical physical dimensions (0.154", 3.90mm Width). PCB footprints and reflow soldering profiles remain consistent across all substitutes.

Q: Which part should be selected for new production designs?

A: The 74HCT4060D,653 from Nexperia is recommended for new designs due to its Active product status, ensuring long-term availability and supply chain stability. The superior count rate provides additional design margin for timing-critical applications.