CD74HCT367MT Equivalent & Substitute Parts

Part Overview

The CD74HCT367MT is a Buffer, Non-Inverting logic IC manufactured by Texas Instruments, housed in a 16-SOIC surface mount package. This component functions as a 2-element buffer with 2 and 4-bit configurations per element and 3-state output capability, operating across a 4.5V to 5.5V supply voltage range. The part is currently discontinued at DiGi Electronics, necessitating identification of equivalent and substitute components for ongoing design requirements and production needs.

Substiute Parts

CD74HCT367MT

Texas InstrumentsIn Stock: 1879CD74HCT367MT Datasheet

Current PartRFQ

CD74HCT367M96

Texas InstrumentsIn Stock: 4619CD74HCT367M96 Datasheet

Parametric EquivalentRFQ

74HCT253D,653

Nexperia USA Inc.In Stock: 364574HCT253D,653 Datasheet

MFR RecommendedRFQ

74HCT367D,653

Nexperia USA Inc.In Stock: 204874HCT367D,653 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CD74HCT367MT is determined by strict alignment of the following critical parameters:

Primary Substitution Criteria:

• Logic Type: Buffer, Non-Inverting
• Number of Elements: 2
• Number of Bits per Element: 2, 4 (Hex)
• Output Type: 3-State
• Voltage - Supply: 4.5V ~ 5.5V
• Package / Case: 16-SOIC (0.154", 3.90mm Width)
• Mounting Type: Surface Mount
• Series: 74HCT

Substitute Categories:

Parametric Equivalent (Same Electrical and Mechanical Specifications): CD74HCT367M96 matches all critical parameters identically, with identical current output ratings (4mA, 4mA) and operating temperature range (-55°C ~ 125°C). The only difference is packaging format (Cut Tape & Digi-Reel® versus Tape & Reel) and product status (Active versus Discontinued).

Manufacturer Recommended Substitutes (Functional Equivalents with Parameter Variations): 74HCT367D,653 (Nexperia USA Inc.) maintains identical logic type, element configuration, and package dimensions but differs in output current (6mA, 6mA versus 4mA, 4mA) and operating temperature range (-40°C ~ 125°C versus -55°C ~ 125°C). This part is currently Active.

74HCT253D,653 (Nexperia USA Inc.) is a Multiplexer 2 x 4:1 configuration and does not meet the Buffer, Non-Inverting substitution criteria. This part is listed in the original substitute field but does not satisfy the primary substitution parameters.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection: CD74HCT367M96

CD74HCT367M96 is the direct parametric equivalent to CD74HCT367MT. All electrical and mechanical specifications are identical, including output current ratings and operating temperature range. This part is manufactured by Texas Instruments, maintains ROHS3 compliance and MSL Level 1 rating, and is currently Active in production. The only distinction is packaging format (Cut Tape & Digi-Reel® versus Tape & Reel), which does not affect functional performance. This part is the preferred substitute for direct replacement applications.

Secondary Selection: 74HCT367D,653

74HCT367D,653 manufactured by Nexperia USA Inc. is a functional equivalent suitable for applications where the parameter variations are acceptable. This part maintains identical logic configuration and package dimensions but provides higher output current capability (6mA versus 4mA) and operates across a narrower temperature range (-40°C to 125°C versus -55°C to 125°C). This part is currently Active and ROHS3 compliant. Selection of this part requires confirmation that the reduced low-temperature operating limit (-40°C minimum versus -55°C minimum) and higher output current do not conflict with circuit design requirements.

Frequently Asked Questions (FAQ)

Q: Can CD74HCT367M96 be used as a direct replacement for CD74HCT367MT?

A: Yes. CD74HCT367M96 is a parametric equivalent with identical electrical specifications, output current ratings, operating temperature range, and package dimensions. The difference in packaging format (Cut Tape & Digi-Reel® versus Tape & Reel) does not affect functional performance or circuit compatibility.

Q: What is the difference between CD74HCT367M96 and 74HCT367D,653?

A: Both are Buffer, Non-Inverting 74HCT367 series components with identical logic configuration and package size. CD74HCT367M96 is manufactured by Texas Instruments with 4mA output current and -55°C to 125°C operating range. 74HCT367D,653 is manufactured by Nexperia USA Inc. with 6mA output current and -40°C to 125°C operating range. Selection depends on whether the higher output current and narrower low-temperature limit are compatible with your application.

Q: Is 74HCT253D,653 a suitable substitute?

A: No. 74HCT253D,653 is a Multiplexer 2 x 4:1 configuration and does not meet the Buffer, Non-Inverting functional requirements of the CD74HCT367MT. This part has different logic type and circuit architecture and is not a valid substitute.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. CD74HCT367M96 and 74HCT367D,653 are both ROHS3 compliant with MSL Level 1 rating, matching the compliance status of the original CD74HCT367MT.

Q: What packaging formats are available for the 74HCT367 series?

A: CD74HCT367MT is supplied in Tape & Reel (TR) format. CD74HCT367M96 is supplied in Cut Tape (CT) & Digi-Reel® format. Both formats contain the same component in different delivery configurations suitable for different manufacturing processes.

Q: Can I use 74HCT367D,653 in applications requiring -55°C operation?

A: No. 74HCT367D,653 has a minimum operating temperature of -40°C. If your application requires operation at -55°C, CD74HCT367M96 is the appropriate substitute, as it maintains the full -55°C to 125°C operating range of the original CD74HCT367MT.