CD74HCT367M Equivalent & Substitute Parts

Part Overview

The CD74HCT367M is a Buffer, Non-Inverting logic IC manufactured by Texas Instruments, featuring 2 elements with 2 and 4 (Hex) bits per element and 3-State output capability. The device operates at 4.5V to 5.5V supply voltage with an operating temperature range of -55°C to 125°C. This part is currently discontinued at DiGi Electronics, making identification of equivalent and substitute parts essential for ongoing design support and production continuity.

Substiute Parts

CD74HCT367M

Texas InstrumentsIn Stock: 1231CD74HCT367M Datasheet

Current PartRFQ

CD74HCT367M96

Texas InstrumentsIn Stock: 4619CD74HCT367M96 Datasheet

DirectRFQ

74HCT367D,653

Nexperia USA Inc.In Stock: 204874HCT367D,653 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CD74HCT367M are identified based on strict electrical and mechanical compatibility criteria. The following parameters determine valid substitution:

Critical Substitution Parameters:

• Logic Type: Buffer, Non-Inverting
• Number of Elements: 2
• Number of Bits per Element: 2, 4 (Hex)
• Output Type: 3-State
• Voltage - Supply: 4.5V ~ 5.5V
• Package / Case: 16-SOIC (0.154", 3.90mm Width)
• Mounting Type: Surface Mount
• Series: 74HCT

Allowable Variation Parameters:

• Current - Output High, Low: Up to 6mA, 6mA (higher current capability is acceptable)
• Operating Temperature: Minimum -40°C acceptable (original specification -55°C to 125°C)
• Packaging Format: Tube, Cut Tape (CT) & Digi-Reel®, or Tape & Reel (TR)
• Manufacturer: Texas Instruments or Nexperia USA Inc. (same logic family)

Parameter Comparison

Engineering Selection Recommendations

CD74HCT367M96 (Primary Substitute)

This part is manufactured by Texas Instruments and maintains identical electrical specifications to the main part, including output current (4mA, 4mA) and operating temperature range (-55°C to 125°C). The device is currently in active production status with 4600 units in stock. Packaging is available in Cut Tape (CT) & Digi-Reel® format. This substitute provides direct functional equivalence with no design modifications required.

74HCT367D,653 (Alternative Substitute)

This part is manufactured by Nexperia USA Inc. and provides functional compatibility with the following considerations: output current is rated at 6mA, 6mA (higher than the original 4mA specification), and the operating temperature range is -40°C to 125°C (minimum temperature is -40°C versus the original -55°C). The device is in active production status with 2021 units in stock. Packaging is available in Tape & Reel (TR) format. This substitute is suitable for applications where the lower temperature limit of -40°C is acceptable and where higher output current capability is beneficial or neutral to circuit operation.

Both substitutes maintain ROHS3 compliance, MSL Level 1 rating, and identical package geometry (16-SOIC, 0.154", 3.90mm Width).

Frequently Asked Questions (FAQ)

Q: Can CD74HCT367M96 be used as a direct replacement for CD74HCT367M?

A: Yes. The CD74HCT367M96 is a direct substitute. Both parts are manufactured by Texas Instruments, share identical logic specifications (Buffer, Non-Inverting, 2 elements, 2/4 bits per element, 3-State output), and have matching electrical parameters including 4mA output current and -55°C to 125°C operating temperature range. The only difference is packaging format (Cut Tape & Digi-Reel® versus Tube).

Q: What are the differences between CD74HCT367M96 and 74HCT367D,653?

A: Both are functional substitutes for the CD74HCT367M. The key differences are: (1) Manufacturer—CD74HCT367M96 is Texas Instruments; 74HCT367D,653 is Nexperia USA Inc.; (2) Output Current—CD74HCT367M96 is 4mA, 4mA; 74HCT367D,653 is 6mA, 6mA; (3) Operating Temperature—CD74HCT367M96 is -55°C to 125°C; 74HCT367D,653 is -40°C to 125°C; (4) Packaging Format—CD74HCT367M96 is Cut Tape & Digi-Reel®; 74HCT367D,653 is Tape & Reel.

Q: Is the 74HCT367D,653 suitable for applications requiring -55°C operation?

A: No. The 74HCT367D,653 has a minimum operating temperature of -40°C. If your application requires operation at -55°C, use CD74HCT367M96, which maintains the original -55°C to 125°C temperature range.

Q: Does the higher output current of 74HCT367D,653 (6mA versus 4mA) affect circuit compatibility?

A: Higher output current capability does not create compatibility issues. The 74HCT367D,653 can drive the same loads as the original CD74HCT367M. The higher current rating indicates greater drive capability, which is beneficial for circuits with higher capacitive or resistive loads.

Q: Are all three parts (CD74HCT367M, CD74HCT367M96, 74HCT367D,653) in the same package?

A: Yes. All three parts use the 16-SOIC package (0.154", 3.90mm Width) with Surface Mount mounting type. They are mechanically and electrically compatible for PCB layout purposes.

Q: What is the product status of each part?

A: CD74HCT367M is discontinued at DiGi Electronics. CD74HCT367M96 and 74HCT367D,653 are both in active production status with current inventory availability.