CD74HC4094M96G3 Equivalent & Substitute Parts

Part Overview

The CD74HC4094M96G3 is an 8-stage shift register with storage and bus register functionality manufactured by Texas Instruments. This logic IC operates as a serial-to-parallel converter in the 74HC series and is housed in a 16-SOIC surface mount package. The part is currently active in production with 3,239 units in stock.

Equivalent and substitute parts are necessary when the primary part number becomes unavailable, when alternative packaging formats are required for manufacturing processes, or when sourcing from multiple manufacturers is needed for supply chain resilience.

Substiute Parts

CD74HC4094M96G3

Texas InstrumentsIn Stock: 3349CD74HC4094M96G3 Datasheet

Current PartRFQ

CD74HC4094M96

Texas InstrumentsIn Stock: 15419CD74HC4094M96 Datasheet

Parametric EquivalentRFQ

CD74HC4094MT

Texas InstrumentsIn Stock: 872CD74HC4094MT Datasheet

Parametric EquivalentRFQ

MC74HC4094ADR2G

onsemiIn Stock: 17198MC74HC4094ADR2G Datasheet

DirectRFQ

74HC4094D,653

Nexperia USA Inc.In Stock: 1036174HC4094D,653 Datasheet

MFR RecommendedRFQ

74HC4094D-Q100J

Nexperia USA Inc.In Stock: 1815374HC4094D-Q100J Datasheet

MFR RecommendedRFQ

M74HC4094YRM13TR

STMicroelectronicsIn Stock: 3656M74HC4094YRM13TR Datasheet

MFR RecommendedRFQ

MC74HC4094ADG

onsemiIn Stock: 1857MC74HC4094ADG Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CD74HC4094M96G3 is determined by strict equivalence across the following parameters:

• Logic Type: Shift Register
• Number of Elements: 1
• Number of Bits per Element: 8
• Output Type: Tri-State
• Function: Serial to Parallel
• Voltage - Supply: 2V ~ 6V
• Package / Case: 16-SOIC (0.154", 3.90mm Width)
• Mounting Type: Surface Mount
• Base Product Number: 74HC4094

Substitute parts are grouped into three categories:

Parametric Equivalents - Identical electrical and mechanical specifications with different packaging formats (Cut Tape & Digi-Reel® instead of Tape & Reel).

Direct Manufacturer Equivalents - Parts from alternative manufacturers meeting all core parameters with potential variations in operating temperature range or additional certifications.

Manufacturer Recommended Equivalents - Parts qualified by manufacturers as direct replacements, including automotive-grade variants with AEC-Q100 qualification.

Parameter Comparison

Engineering Selection Recommendations

For Active Production Use:

CD74HC4094M96 and CD74HC4094M96G3 are both Texas Instruments parts with identical electrical specifications. Selection between them depends on packaging format requirements: the M96G3 uses Tape & Reel format while the M96 uses Cut Tape & Digi-Reel® format. Both are ROHS3 compliant and have unlimited moisture sensitivity rating.

74HC4094D-Q100J from Nexperia USA Inc. is an active production alternative with AEC-Q100 automotive qualification. Operating temperature range is -40°C to 125°C, which is narrower than the primary part's -55°C to 125°C range. This part is suitable for applications where the narrower temperature range is acceptable and automotive-grade qualification is beneficial.

M74HC4094YRM13TR from STMicroelectronics is an active production part with AEC-Q100 automotive qualification. Operating temperature range is -40°C to 125°C. Moisture sensitivity level is 3 (168 Hours), which differs from the primary part's level 1 rating.

For Supply Chain Continuity:

MC74HC4094ADR2G from onsemi is in Last Time Buy status with 17,120 units available. This part meets all core electrical parameters and is suitable for applications where the narrower operating temperature range (-55°C to 125°C equivalent to primary part) is acceptable.

Parts to Avoid for New Designs:

CD74HC4094MT is discontinued at DiGi Electronics and should not be selected for new production designs.

MC74HC4094ADG is obsolete and should not be selected for new production designs.

Frequently Asked Questions (FAQ)

Q: Can I substitute CD74HC4094M96G3 with CD74HC4094M96?

A: Yes. Both parts are manufactured by Texas Instruments with identical electrical and mechanical specifications. The difference is packaging format: M96G3 uses Tape & Reel (TR) while M96 uses Cut Tape (CT) & Digi-Reel®. Selection depends on your assembly equipment compatibility.

Q: What is the difference between the Nexperia 74HC4094D,653 and 74HC4094D-Q100J?

A: Both are from Nexperia USA Inc. with identical electrical specifications. The 74HC4094D-Q100J includes AEC-Q100 automotive qualification and uses Tape & Reel packaging, while 74HC4094D,653 uses Cut Tape & Digi-Reel® packaging. The 74HC4094D-Q100J is recommended for automotive applications.

Q: Are there temperature range differences between substitute parts?

A: Yes. The primary part CD74HC4094M96G3 operates from -55°C to 125°C. Nexperia parts (74HC4094D,653 and 74HC4094D-Q100J) and STMicroelectronics M74HC4094YRM13TR operate from -40°C to 125°C. Verify your application's minimum operating temperature requirement before substitution.

Q: What does MSL (Moisture Sensitivity Level) mean for substitution?

A: Moisture Sensitivity Level indicates how sensitive the component is to moisture during storage and handling. The primary part has MSL 1 (Unlimited), meaning no special moisture control is required. M74HC4094YRM13TR has MSL 3 (168 Hours), requiring moisture control during storage. Verify your storage and handling procedures are compatible with the MSL rating of any substitute part.

Q: Can I use MC74HC4094ADG as a substitute?

A: No. MC74HC4094ADG is obsolete and should not be used for new designs or production.

Q: Which substitute part has the highest inventory availability?

A: MC74HC4094ADR2G from onsemi has 17,120 units in stock, followed by 74HC4094D-Q100J from Nexperia with 18,085 units. Both are suitable alternatives with active or Last Time Buy status.