CD74HC4053MG4 Equivalent & Substitute Parts

Part Overview

The CD74HC4053MG4 is a 3-circuit SPDT (Single Pole Double Throw) analog switch IC manufactured by Texas Instruments in 16-SOIC surface mount packaging. This device functions as a 2:1 multiplexer/demultiplexer with 130Ω on-state resistance and operates across supply voltages of 2V to 6V (single supply) or ±1V to ±5V (dual supply). The part is classified as Obsolete, necessitating identification of functionally equivalent alternatives for ongoing design support and procurement.

Key Parameters

Parameter	Value
Switch Circuit Type	SPDT
Multiplexer/Demultiplexer Configuration	2:1
Number of Circuits	3
On-State Resistance (Max)	130Ω
Channel-to-Channel Matching (ΔRon)	5Ω
Voltage Supply - Single (V+)	2V ~ 6V
Voltage Supply - Dual (V±)	±1V ~ 5V
-3dB Bandwidth	200MHz
Channel Capacitance (CS(off), CD(off))	8pF
Current - Leakage (IS(off)) Max	100nA
Operating Temperature	-55°C ~ 125°C
Package / Case	16-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the CD74HC4053MG4 is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Switch circuit type: SPDT
Multiplexer/demultiplexer configuration: 2:1
Number of circuits: 3
Package type: 16-SOIC surface mount
Operating temperature range: -55°C ~ 125°C minimum
Supply voltage compatibility: 2V ~ 6V single supply or ±1V ~ ±5V dual supply

Secondary Compatibility Parameters:

On-state resistance: 130Ω maximum (tolerance: ±20Ω acceptable for functional equivalence)
Channel-to-channel matching: 5Ω maximum
-3dB bandwidth: 200MHz minimum
Channel capacitance: 8pF maximum
Leakage current: 100nA maximum
RoHS3 compliance and MSL 1 rating

Substitute parts are grouped by product status (Active, Last Time Buy, Obsolete) and manufacturer. Parts meeting all primary criteria and maintaining secondary parameter specifications within acceptable tolerances are classified as direct equivalents. Parts with minor parameter variations (such as reduced on-state resistance or improved bandwidth) are classified as enhanced alternatives suitable for direct replacement.

Parameter Comparison

Part Number	Manufacturer	Product Status	On-State Resistance (Max)	ΔRon (Max)	V+ Supply	V± Supply	-3dB Bandwidth	Channel Capacitance	Leakage Current (Max)	Operating Temp	Package
CD74HC4053MG4	Texas Instruments	Obsolete	130Ω	5Ω	2V ~ 6V	±1V ~ 5V	200MHz	8pF	100nA	-55°C ~ 125°C	16-SOIC
CD74HC4053M	Texas Instruments	Last Time Buy	130Ω	5Ω	2V ~ 6V	±1V ~ 5V	200MHz	8pF	100nA	-55°C ~ 125°C	16-SOIC
CD74HC4053M96	Texas Instruments	Active	130Ω	5Ω	2V ~ 6V	±1V ~ 5V	200MHz	8pF	100nA	-55°C ~ 125°C	16-SOIC
MC74HC4053ADR2G	onsemi	Active	100Ω	10Ω	2V ~ 6V	±2V ~ 6V	120MHz	50pF	100nA	-55°C ~ 125°C	16-SOIC
74HC4053D,653	Nexperia USA Inc.	Active	120Ω	6Ω	2V ~ 10V	±1.5V ~ 5V	170MHz	4.6pF	100nA	-40°C ~ 125°C	16-SOIC
74HCT4053D,118	Nexperia USA Inc.	Active	120Ω	6Ω	4.5V ~ 5.5V	±1V ~ 5V	170MHz	4.6pF	100nA	-40°C ~ 125°C	16-SOIC
MC74HC4053ADG	onsemi	Active	100Ω	10Ω	2V ~ 6V	±2V ~ 6V	120MHz	50pF	100nA	-55°C ~ 125°C	16-SOIC
NLAS4053DR2G	onsemi	Obsolete	26Ω	10Ω	3V ~ 5V	±3V	180MHz	10pF	100nA	-55°C ~ 125°C	16-SOIC
NLV74HC4053ADR2G	onsemi	Obsolete	100Ω	10Ω	2V ~ 6V	±2V ~ 6V	120MHz	50pF	100nA	-55°C ~ 125°C	16-SOIC

Engineering Selection Recommendations

Recommended Primary Substitutes (Active Status):

CD74HC4053M96 is the preferred direct replacement. Manufactured by Texas Instruments with Active product status, it maintains identical electrical specifications to the CD74HC4053MG4 across all critical parameters. The primary distinction is packaging format (Cut Tape & Digi-Reel versus individual packaging), with 16,485 units currently in stock. This part ensures design continuity with no circuit modifications required.

Alternative Substitutes (Active Status):

MC74HC4053ADG and MC74HC4053ADR2G (onsemi) provide functional equivalence with enhanced performance characteristics. Both feature reduced on-state resistance (100Ω versus 130Ω), supporting lower-impedance signal paths. The trade-off includes reduced -3dB bandwidth (120MHz versus 200MHz) and increased channel capacitance (50pF versus 8pF). These parts are suitable for applications where lower on-state resistance is beneficial and bandwidth requirements do not exceed 120MHz. Both maintain full temperature range (-55°C ~ 125°C) and RoHS3 compliance.

74HC4053D,653 (Nexperia) offers an intermediate alternative with 120Ω on-state resistance and extended single-supply voltage range (2V ~ 10V). Operating temperature range is reduced to -40°C ~ 125°C. This part is appropriate for applications requiring extended supply voltage tolerance with standard temperature specifications.

74HCT4053D,118 (Nexperia) is restricted to TTL-compatible supply voltage (4.5V ~ 5.5V) and is suitable only for designs operating within this narrow voltage window. Product status is Active with high inventory availability (83,039 units).

Obsolete Alternatives (Not Recommended for New Designs):

NLAS4053DR2G and NLV74HC4053ADR2G are classified as Obsolete and should not be selected for new designs. These parts are retained in the substitution list for legacy system maintenance only.

Frequently Asked Questions (FAQ)

Q: Can CD74HC4053M96 replace CD74HC4053MG4 without circuit modifications?

A: Yes. CD74HC4053M96 maintains identical electrical specifications across all parameters: 130Ω on-state resistance, 200MHz bandwidth, 8pF channel capacitance, and full temperature range (-55°C ~ 125°C). The only difference is packaging format (Cut Tape & Digi-Reel versus tube). No design changes are required.

Q: What is the difference between MC74HC4053ADG and MC74HC4053ADR2G?

A: Both parts are manufactured by onsemi with identical electrical specifications. The primary distinction is packaging: MC74HC4053ADG is supplied in Tube packaging, while MC74HC4053ADR2G is supplied in Cut Tape & Digi-Reel format. Electrical performance and pin configuration are identical.

Q: Can I use 74HCT4053D,118 in place of CD74HC4053MG4?

A: Only if your circuit operates exclusively within the 4.5V to 5.5V supply voltage range. The 74HCT4053D,118 is TTL-compatible and does not support the full 2V ~ 6V range of the original part. If your design requires operation below 4.5V or above 5.5V, this substitute is not suitable.

Q: Why do onsemi parts show reduced bandwidth (120MHz versus 200MHz)?

A: The MC74HC4053ADG and MC74HC4053ADR2G variants feature different internal design characteristics optimized for lower on-state resistance (100Ω). This design trade-off results in reduced -3dB bandwidth. Selection depends on whether your application prioritizes impedance or bandwidth performance.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All parts listed maintain RoHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with modern manufacturing and environmental standards.

Q: What is the operating temperature difference between Nexperia and Texas Instruments parts?

A: Texas Instruments CD74HC4053 variants and onsemi MC74HC4053 parts operate across -55°C ~ 125°C. Nexperia 74HC4053D,653 and 74HCT4053D,118 are rated -40°C ~ 125°C. If your application requires operation below -40°C, select Texas Instruments or onsemi alternatives.

Q: Can NLAS4053DR2G be used as a substitute?

A: NLAS4053DR2G is classified as Obsolete and should not be selected for new designs. It is retained in reference materials for legacy system support only. The significantly reduced on-state resistance (26Ω) and restricted supply voltage range (3V ~ 5V, ±3V) make it unsuitable as a general replacement.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message