CD74HC4053ME4 Equivalent & Substitute Parts

Part Overview

The CD74HC4053ME4 is a 3-circuit SPDT (Single Pole Double Throw) analog switch IC manufactured by Texas Instruments, housed in a 16-SOIC surface mount package. This device functions as a 2:1 multiplexer/demultiplexer with 130Ω on-state resistance and operates across a wide supply voltage range of 2V to 6V (single supply) or ±1V to ±5V (dual supply). The part is classified as Obsolete, making equivalent and substitute parts necessary for ongoing design support and procurement continuity.

Key Parameters

Parameter	Value
Switch Circuit Type	SPDT
Multiplexer/Demultiplexer Configuration	2:1
Number of Circuits	3
On-State Resistance (Max)	130Ω
Channel-to-Channel Matching (ΔRon)	5Ω
Voltage Supply - Single (V+)	2V ~ 6V
Voltage Supply - Dual (V±)	±1V ~ 5V
-3dB Bandwidth	200MHz
Channel Capacitance (CS(off), CD(off))	8pF
Current - Leakage (IS(off)) Max	100nA
Operating Temperature	-55°C ~ 125°C
Package / Case	16-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution eligibility for the CD74HC4053ME4 is determined by the following critical parameters:

Functional Requirements:

Switch circuit type must be SPDT
Multiplexer/demultiplexer configuration must be 2:1
Number of circuits must be 3
Package must be 16-SOIC form factor

Electrical Compatibility:

On-state resistance must not exceed 130Ω (lower values are acceptable)
Supply voltage ranges must encompass or match the original specification
Operating temperature range must cover -55°C to 125°C minimum
Leakage current specification must be 100nA or lower

Compliance & Environmental:

RoHS3 compliance required
MSL rating of 1 (Unlimited) required
REACH Unaffected status required

Substitute parts are grouped into two categories: direct equivalents (identical electrical specifications) and functional substitutes (compatible electrical parameters within allowable tolerances).

Parameter Comparison

Part Number	Manufacturer	On-State Resistance (Max)	ΔRon	V+ Supply	V± Supply	-3dB Bandwidth	Channel Capacitance	IS(off) Max	Operating Temp	Product Status	Packaging
CD74HC4053ME4	Texas Instruments	130Ω	5Ω	2V ~ 6V	±1V ~ 5V	200MHz	8pF	100nA	-55°C ~ 125°C	Obsolete	16-SOIC
CD74HC4053M	Texas Instruments	130Ω	5Ω	2V ~ 6V	±1V ~ 5V	200MHz	8pF	100nA	-55°C ~ 125°C	Last Time Buy	Tube
CD74HC4053M96	Texas Instruments	130Ω	5Ω	2V ~ 6V	±1V ~ 5V	200MHz	8pF	100nA	-55°C ~ 125°C	Active	Cut Tape & Digi-Reel
MC74HC4053ADR2G	onsemi	100Ω	10Ω	2V ~ 6V	±2V ~ 6V	120MHz	50pF	100nA	-55°C ~ 125°C	Active	Tape & Reel
74HC4053D,653	Nexperia USA Inc.	120Ω	6Ω	2V ~ 10V	±1.5V ~ 5V	170MHz	4.6pF	100nA	-40°C ~ 125°C	Active	Cut Tape & Digi-Reel
74HCT4053D,118	Nexperia USA Inc.	120Ω	6Ω	4.5V ~ 5.5V	±1V ~ 5V	170MHz	4.6pF	100nA	-40°C ~ 125°C	Active	Tape & Reel
MC74HC4053ADG	onsemi	100Ω	10Ω	2V ~ 6V	±2V ~ 6V	120MHz	50pF	100nA	-55°C ~ 125°C	Active	Tube
NLAS4053DR2G	onsemi	26Ω	10Ω	3V ~ 5V	±3V	180MHz	10pF	100nA	-55°C ~ 125°C	Obsolete	Cut Tape
NLV74HC4053ADR2G	onsemi	100Ω	10Ω	2V ~ 6V	±2V ~ 6V	120MHz	50pF	100nA	-55°C ~ 125°C	Obsolete	Cut Tape & Digi-Reel

Engineering Selection Recommendations

Direct Equivalents (Identical Electrical Specifications):

CD74HC4053M and CD74HC4053M96 are direct electrical equivalents to the CD74HC4053ME4, differing only in packaging format and product status. CD74HC4053M96 is the recommended choice for new designs due to its Active product status and availability in standard Cut Tape & Digi-Reel packaging. Both maintain identical on-state resistance (130Ω), bandwidth (200MHz), and supply voltage specifications.

Functional Substitutes (Compatible Within Tolerances):

MC74HC4053ADR2G and MC74HC4053ADG (onsemi) are functionally compatible substitutes with lower on-state resistance (100Ω) and extended dual supply voltage range (±2V ~ 6V). These parts are suitable for applications where lower on-state resistance provides performance benefits. Both maintain the required operating temperature range and leakage current specifications.

74HC4053D,653 (Nexperia) offers extended single supply voltage range (2V ~ 10V) with slightly lower on-state resistance (120Ω) and reduced channel capacitance (4.6pF). This part is suitable for applications requiring wider supply voltage tolerance. Note: Operating temperature minimum is -40°C, which may not meet requirements for extended temperature applications below -40°C.

Not Recommended:

74HCT4053D,118 has a restricted single supply voltage range (4.5V ~ 5.5V), making it unsuitable for applications requiring the full 2V ~ 6V range of the original part.

NLAS4053DR2G is Obsolete and has restricted supply voltage ranges (3V ~ 5V single, ±3V dual), limiting its applicability.

NLV74HC4053ADR2G is Obsolete and automotive-qualified (AEC-Q100), suitable only for automotive applications requiring this qualification.

Frequently Asked Questions (FAQ)

Q: Can I use CD74HC4053M96 as a direct replacement for CD74HC4053ME4?

A: Yes. CD74HC4053M96 is electrically identical to CD74HC4053ME4. The only differences are packaging format (Cut Tape & Digi-Reel versus the original 16-SOIC) and product status (Active versus Obsolete). Both are 16-SOIC form factor and pin-compatible.

Q: What is the difference between MC74HC4053ADR2G and MC74HC4053ADG?

A: Both parts are electrically identical. The difference is packaging: MC74HC4053ADR2G is supplied in Tape & Reel format, while MC74HC4053ADG is supplied in Tube format. Select based on your procurement and assembly requirements.

Q: Can I use 74HC4053D,653 in place of CD74HC4053ME4?

A: Yes, with one consideration. The 74HC4053D,653 has a lower operating temperature minimum of -40°C instead of -55°C. If your application requires operation below -40°C, this part is not suitable. For applications within -40°C to 125°C, it is functionally compatible.

Q: Why does NLAS4053DR2G have much lower on-state resistance (26Ω)?

A: NLAS4053DR2G is a different product line optimized for lower on-state resistance at the cost of restricted supply voltage ranges (3V ~ 5V single, ±3V dual). It is not recommended as a substitute due to its Obsolete status and voltage limitations.

Q: Is 74HCT4053D,118 compatible with my design?

A: Only if your application operates exclusively at 4.5V to 5.5V supply voltage. The 74HCT4053D,118 cannot operate at the full 2V ~ 6V range specified for the CD74HC4053ME4. For designs requiring the extended voltage range, use CD74HC4053M96, MC74HC4053ADR2G, or MC74HC4053ADG instead.

Q: What does "Channel-to-Channel Matching (ΔRon)" mean for substitution?

A: ΔRon specifies the maximum variation in on-state resistance between the three switch circuits within a single IC. Lower values indicate better matching between channels. The original part specifies 5Ω matching. Substitutes with higher ΔRon values (such as 10Ω) may introduce slightly greater channel-to-channel variation but remain functionally compatible for most applications.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All parts listed meet RoHS3 compliance and REACH Unaffected status, matching the environmental requirements of the original CD74HC4053ME4.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message