CD74HC4024M96 Binary Counter IC - Equivalent & Substitute Parts

Part Overview

The CD74HC4024M96 is a 7-bit binary counter IC manufactured by Texas Instruments, housed in a 14-SOIC surface mount package. This logic component functions as a negative edge-triggered counter with asynchronous reset capability, operating across a 2V to 6V supply range with a maximum count rate of 35 MHz. The part is currently active in production with full RoHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are necessary when the primary part becomes unavailable, when alternative packaging formats are required, or when enhanced performance specifications are needed for specific application requirements.

Substiute Parts

CD74HC4024M96

Texas InstrumentsIn Stock: 10266CD74HC4024M96 Datasheet

Current PartRFQ

CD74HC4024MT

Texas InstrumentsIn Stock: 1262CD74HC4024MT Datasheet

Parametric EquivalentRFQ

74HC4024D,653

Nexperia USA Inc.In Stock: 113174HC4024D,653 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CD74HC4024M96 is determined by strict equivalence across the following critical parameters: Logic Type (Binary Counter), Number of Bits per Element (7 Bit), Direction (Up), Trigger Type (Negative Edge), Reset Type (Asynchronous), Voltage Supply Range (2V ~ 6V), and Package Type (14-SOIC). All identified substitute parts maintain these core electrical and mechanical specifications. Packaging format variations (Tape & Reel versus Cut Tape & Digi-Reel) represent the primary distinction among equivalent parts and do not affect functional compatibility. Count rate and operating temperature ranges may vary within acceptable limits for specific applications.

Parameter Comparison

Engineering Selection Recommendations

The CD74HC4024M96 remains the primary selection for new designs due to its active product status and full availability. The CD74HC4024MT provides parametric equivalence with identical electrical specifications but is available only in Cut Tape and Digi-Reel packaging formats; this part is discontinued at DiGi Electronics and should be selected only when specific packaging requirements mandate its use. The 74HC4024D,653 manufactured by Nexperia USA Inc. is recommended as the preferred alternative when CD74HC4024M96 availability is constrained. This Nexperia part maintains full electrical compatibility across all critical parameters, offers enhanced count rate performance at 90 MHz, and carries active product status with Tape & Reel packaging. The operating temperature range of the Nexperia part extends to -40°C minimum, which is acceptable for applications not requiring the full -55°C lower limit. All three parts maintain ROHS3 compliance and unlimited moisture sensitivity rating, ensuring regulatory and environmental compatibility.

Frequently Asked Questions (FAQ)

Q: Can the CD74HC4024MT be used as a direct replacement for the CD74HC4024M96?

A: Yes. Both parts are manufactured by Texas Instruments and maintain identical electrical specifications including 7-bit binary counter functionality, negative edge triggering, asynchronous reset, 35 MHz count rate, and 2V to 6V supply voltage. The primary difference is packaging format: CD74HC4024M96 is supplied in Tape & Reel format while CD74HC4024MT is supplied in Cut Tape and Digi-Reel format. Functional compatibility is complete.

Q: What are the advantages of selecting the 74HC4024D,653 from Nexperia?

A: The Nexperia 74HC4024D,653 maintains full electrical equivalence with the CD74HC4024M96 across all critical counter specifications. It offers a higher count rate of 90 MHz compared to 35 MHz, providing performance headroom for timing-sensitive applications. The part is currently active in production with Tape & Reel packaging and full RoHS3 compliance. The operating temperature range extends to -40°C, which is suitable for most industrial and commercial applications.

Q: Are there any compatibility concerns when substituting between these three parts?

A: No compatibility concerns exist for the specified electrical and mechanical parameters. All three parts are housed in 14-SOIC surface mount packages with identical pinouts and functional behavior. Pin-for-pin compatibility is maintained. Substitution is safe from a circuit design perspective when the application requirements fall within the specified parameter ranges of the selected part.

Q: Why is the CD74HC4024MT listed as discontinued at DiGi Electronics?

A: Discontinuation status reflects supplier inventory decisions and does not indicate product obsolescence. The part remains available through alternative distribution channels. Selection of this part should be based on specific packaging requirements, as the CD74HC4024M96 and 74HC4024D,653 offer superior availability in standard Tape & Reel format.

Q: Can these parts be used interchangeably in existing designs?

A: Yes, for designs currently using the CD74HC4024M96, both the CD74HC4024MT and 74HC4024D,653 are functionally interchangeable without circuit modification. The 14-SOIC package footprint is identical across all three parts. No design changes are required for substitution.