CD74ACT109M96E4 Equivalent & Substitute Parts

Part Overview

The CD74ACT109M96E4 is a dual JK-type flip-flop logic integrated circuit manufactured by Texas Instruments, housed in a 16-SOIC surface mount package. This component functions as a Set(Preset) and Reset element with complementary outputs, operating at a maximum clock frequency of 100 MHz. The CD74ACT109M96E4 is currently discontinued at DiGi Electronics, making identification of equivalent substitute parts essential for ongoing design support and production continuity.

Substiute Parts

CD74ACT109M96E4

Texas InstrumentsIn Stock: 958CD74ACT109M96E4 Datasheet

Current PartRFQ

CD74ACT109M96

Texas InstrumentsIn Stock: 1633CD74ACT109M96 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CD74ACT109M96E4 is determined by strict equivalence across the following critical parameters:

• Functional Type: Dual JK-type flip-flop with Set(Preset) and Reset functions
• Output Configuration: Complementary outputs
• Electrical Performance: Clock frequency of 100 MHz, propagation delay of 10.3 ns @ 5V/50pF
• Electrical Characteristics: Supply voltage 4.5V ~ 5.5V, output current 24 mA (high/low), quiescent current 4 µA
• Package Specification: 16-SOIC (0.154", 3.90mm Width) surface mount
• Operating Range: -55°C ~ 125°C
• Compliance: ROHS3 Compliant, MSL Level 1

The CD74ACT109M96 (Tape & Reel packaging variant) meets all electrical and mechanical substitution criteria for the CD74ACT109M96E4.

Parameter Comparison

Engineering Selection Recommendations

The CD74ACT109M96 is the direct substitute for the CD74ACT109M96E4. Both parts are manufactured by Texas Instruments and share identical electrical specifications, functional characteristics, and package geometry. The primary distinction is product status and packaging format: the CD74ACT109M96E4 is discontinued, while the CD74ACT109M96 maintains active status with higher inventory availability. Both parts maintain ROHS3 compliance and MSL Level 1 certification, ensuring compatibility with current manufacturing and environmental standards.

Frequently Asked Questions (FAQ)

Q: Can the CD74ACT109M96 directly replace the CD74ACT109M96E4 in existing designs?

A: Yes. Both parts are electrically and mechanically identical. The CD74ACT109M96 operates at the same clock frequency (100 MHz), propagation delay (10.3 ns @ 5V/50pF), supply voltage range (4.5V ~ 5.5V), and output current specifications (24 mA). The 16-SOIC package dimensions and pin configuration are identical.

Q: What is the difference between the CD74ACT109M96E4 and CD74ACT109M96?

A: The primary difference is packaging format. The CD74ACT109M96E4 is supplied in tube packaging, while the CD74ACT109M96 is supplied in Tape & Reel (TR) format. Electrically and functionally, the parts are equivalent.

Q: Is the CD74ACT109M96 compliant with current environmental standards?

A: Yes. The CD74ACT109M96 is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating, meeting current manufacturing and environmental requirements.

Q: What are the critical parameters for substitution of the CD74ACT109M96E4?

A: Substitution requires matching the following parameters: dual JK-type flip-flop configuration with complementary outputs, 100 MHz clock frequency, 10.3 ns propagation delay @ 5V/50pF, 4.5V ~ 5.5V supply voltage, 24 mA output current, 16-SOIC surface mount package, and -55°C ~ 125°C operating temperature range.

Q: Can other 74ACT series flip-flops substitute for the CD74ACT109M96E4?

A: No. Substitution is limited to parts with identical functional type (dual JK-type), output configuration (complementary), electrical performance specifications, and package geometry. Only the CD74ACT109M96 meets these criteria.