CD5EC560JO3 Mica Capacitor Equivalent & Substitute Parts

Part Overview

The CD5EC560JO3 is a 56 pF mica capacitor manufactured by Cornell Dubilier Electronics (CDE) in the CD5 series. This radial through-hole component operates at 300 V rated voltage with ±5% tolerance and is classified as a general-purpose capacitor. The part is currently active in production with 1,115 units in stock.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product category. The primary reason for identifying substitutes is to ensure design continuity when the original part becomes unavailable or when alternative compliance certifications are required for specific applications.

Substiute Parts

CD5EC560JO3

Cornell Dubilier Electronics (CDE)In Stock: 1158CD5EC560JO3 Datasheet

Current PartRFQ

CD5EC560JO3F

Cornell Dubilier Electronics (CDE)In Stock: 938CD5EC560JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CD5EC560JO3 is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Capacitance value: 56 pF
• Tolerance: ±5%
• Rated voltage: 300 V
• Dielectric material: Mica

Mechanical Parameters:

• Mounting type: Through Hole
• Package configuration: Radial
• Lead spacing: 0.118" (3.00 mm)
• Physical dimensions: 0.272" L x 0.150" W (6.90 mm x 3.80 mm)
• Maximum seated height: 0.220" (5.60 mm)

Environmental Parameters:

• Operating temperature range: -55°C to 125°C
• Moisture sensitivity level: 1 (Unlimited)

All substitute parts must maintain identical values across these parameters to ensure direct functional and mechanical compatibility in circuit board layouts and electrical applications.

Parameter Comparison

Engineering Selection Recommendations

The CD5EC560JO3F is a direct parametric equivalent to the CD5EC560JO3. Both parts are manufactured by Cornell Dubilier Electronics in the CD5 series and maintain identical electrical and mechanical specifications.

Compliance Considerations:

The CD5EC560JO3F carries ROHS3 compliance certification, whereas the CD5EC560JO3 is RoHS non-compliant. The CD5EC560JO3F is also REACH Unaffected, compared to the CD5EC560JO3 which is REACH Affected.

For applications subject to RoHS3 or REACH regulatory requirements, the CD5EC560JO3F is the appropriate selection. For applications without such regulatory constraints, either part may be selected based on availability and supply chain considerations.

Both parts share identical ECCN (EAR99) and HTSUS (8532.29.0020) classifications.

Frequently Asked Questions (FAQ)

Q: Can CD5EC560JO3F be used as a direct replacement for CD5EC560JO3?

A: Yes. The CD5EC560JO3F is electrically and mechanically equivalent to the CD5EC560JO3. All critical parameters including capacitance, voltage rating, tolerance, dielectric material, mounting type, package configuration, and physical dimensions are identical. Both parts are manufactured by Cornell Dubilier Electronics in the CD5 series.

Q: What is the difference between CD5EC560JO3 and CD5EC560JO3F?

A: The primary differences are regulatory compliance certifications. The CD5EC560JO3F is ROHS3 Compliant and REACH Unaffected, while the CD5EC560JO3 is RoHS non-compliant and REACH Affected. All electrical and mechanical parameters are identical.

Q: Are the physical dimensions and lead spacing identical between these parts?

A: Yes. Both parts have identical dimensions of 0.272" L x 0.150" W (6.90 mm x 3.80 mm), maximum seated height of 0.220" (5.60 mm), and lead spacing of 0.118" (3.00 mm). They are fully interchangeable in PCB layouts.

Q: Which part should I select for a new design?

A: Selection depends on regulatory requirements. For designs subject to RoHS3 or REACH compliance mandates, select CD5EC560JO3F. For applications without such requirements, either part is suitable based on availability.

Q: Are both parts currently in production?

A: Yes. Both CD5EC560JO3 and CD5EC560JO3F are Active status products. CD5EC560JO3 has 1,115 units in stock, and CD5EC560JO3F has 868 units in stock.

Q: What is the operating temperature range for these capacitors?

A: Both parts operate across -55°C to 125°C. This range applies to all electrical and mechanical specifications.

Q: Are these parts suitable for high-frequency applications?

A: These are general-purpose mica capacitors. Frequency suitability depends on specific circuit requirements and is not differentiated between the two equivalent parts.