CD5CC180JO3 Equivalent & Substitute Parts

Part Overview

The CD5CC180JO3 is an 18 pF mica capacitor manufactured by Cornell Dubilier Electronics (CDE) in the CD5 series. This through-hole radial component operates at 300 V rated voltage with ±5% tolerance and is classified as a general-purpose capacitor. The part is currently active in production with 880 units in stock.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product category. The primary reason for identifying substitutes is to ensure design continuity when the original part becomes unavailable or when alternative compliance certifications are required for specific applications.

Substiute Parts

CD5CC180JO3

Cornell Dubilier Electronics (CDE)In Stock: 960CD5CC180JO3 Datasheet

Current PartRFQ

CD5CC180JO3F

Cornell Dubilier Electronics (CDE)In Stock: 772CD5CC180JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CD5CC180JO3 mica capacitor is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Capacitance value: 18 pF
• Tolerance: ±5%
• Rated voltage: 300 V
• Dielectric material: Mica

Mechanical Parameters:

• Mounting type: Through Hole
• Package configuration: Radial
• Lead spacing: 0.118 inches (3.00 mm)
• Physical dimensions: 0.272" L × 0.118" W (6.90 mm × 3.00 mm)
• Maximum seated height: 0.201 inches (5.10 mm)

Environmental Parameters:

• Operating temperature range: -55°C to 125°C
• Moisture sensitivity level: 1 (Unlimited)

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. Compliance certifications (RoHS, REACH) and packaging formats may differ between equivalent parts without affecting functional interchangeability.

Parameter Comparison

Engineering Selection Recommendations

CD5CC180JO3 (Original Part):

• Active product status with established supply (880 units in stock)
• RoHS non-compliant; REACH Affected
• Suitable for applications without RoHS3 or REACH compliance requirements
• Established design history and field performance data

CD5CC180JO3F (Substitute Part):

• Active product status with available inventory (704 units in stock)
• ROHS3 Compliant; REACH Unaffected
• Required for designs subject to RoHS3 or REACH regulatory frameworks
• Identical electrical and mechanical specifications ensure direct functional replacement

Both parts are manufactured by Cornell Dubilier Electronics within the CD5 series and maintain complete parametric equivalence. Selection between these parts is determined by regulatory compliance requirements applicable to the end application, not by electrical or mechanical performance differences.

Frequently Asked Questions (FAQ)

Q: Can CD5CC180JO3F replace CD5CC180JO3 in existing designs?

A: Yes. The CD5CC180JO3F is a parametric equivalent with identical capacitance (18 pF), tolerance (±5%), voltage rating (300 V), dielectric material (Mica), mounting type (Through Hole), package configuration (Radial), lead spacing (0.118 inches / 3.00 mm), physical dimensions, and operating temperature range (-55°C to 125°C). Direct substitution is electrically and mechanically compatible.

Q: What is the difference between CD5CC180JO3 and CD5CC180JO3F?

A: The primary differences are compliance certifications. CD5CC180JO3F is ROHS3 Compliant and REACH Unaffected, while CD5CC180JO3 is RoHS non-compliant and REACH Affected. All electrical and mechanical parameters are identical.

Q: Which part should I select for new designs?

A: Selection depends on regulatory requirements. If the application requires RoHS3 or REACH compliance, use CD5CC180JO3F. If no such requirements apply, either part is acceptable based on availability and supply chain considerations.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts have identical dimensions: 0.272" L × 0.118" W (6.90 mm × 3.00 mm), maximum seated height of 0.201" (5.10 mm), and lead spacing of 0.118" (3.00 mm). PCB layout and mechanical clearances are interchangeable.

Q: What is the moisture sensitivity level for these capacitors?

A: Both parts have Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage, handling, or assembly.

Q: Are both parts currently in production?

A: Yes. Both CD5CC180JO3 and CD5CC180JO3F are Active products. Current inventory: CD5CC180JO3 (880 units), CD5CC180JO3F (704 units).