CD5CC100DO3 Mica Capacitor 10 pF 300 V Radial Equivalent & Substitute Parts

Part Overview

The CD5CC100DO3 is a 10 pF mica capacitor rated for 300 V with radial through-hole mounting. Manufactured by Cornell Dubilier Electronics (CDE), this component operates across the temperature range of -55°C to 125°C and is classified as general purpose. The part is currently active in production with 869 units in stock.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same capacitance value, voltage rating, tolerance, dielectric material, mounting type, and physical dimensions. Substitution becomes necessary when the primary part number reaches end-of-life status, inventory constraints occur, or compliance requirements change.

Substiute Parts

CD5CC100DO3

Cornell Dubilier Electronics (CDE)In Stock: 975CD5CC100DO3 Datasheet

Current PartRFQ

CD5CC100DO3F

Cornell Dubilier Electronics (CDE)In Stock: 1094CD5CC100DO3F Datasheet

Parametric EquivalentRFQ

CMR03C100DOCR

Cornell Dubilier Electronics (CDE)In Stock: 1189CMR03C100DOCR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CD5CC100DO3 are qualified based on strict equivalence of the following parameters:

Electrical Parameters:

• Capacitance: 10 pF (exact match required)
• Tolerance: ±0.5 pF (exact match required)
• Voltage Rating: 300 V (exact match required)
• Dielectric Material: Mica (exact match required)

Mechanical Parameters:

• Mounting Type: Through Hole (exact match required)
• Package / Case: Radial (exact match required)
• Lead Spacing: 0.118" (3.00 mm) (exact match required)
• Physical Dimensions: 0.272" L x 0.110" W (6.90 mm x 2.80 mm) (exact match required)
• Height - Seated (Max): 0.189" (4.80 mm) (exact match required)

Environmental Parameters:

• Operating Temperature Range: -55°C to 125°C (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

All identified substitute parts maintain these parameters without deviation, ensuring direct functional and mechanical interchangeability in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

CD5CC100DO3F is a direct parametric equivalent within the CD5 series. This part maintains identical electrical and mechanical specifications while offering improved compliance status. The CD5CC100DO3F is ROHS3 compliant and REACH unaffected, compared to the primary part's non-compliant and REACH-affected status. Inventory availability is higher at 1047 units. Selection of this part is appropriate for applications requiring regulatory compliance with modern environmental standards.

CMR03C100DOCR is a direct parametric equivalent from the CMR series. This part maintains identical electrical and mechanical specifications and offers the same compliance improvements as the CD5CC100DO3F. The CMR03C100DOCR is ROHS3 compliant and REACH unaffected. Inventory availability is highest at 1163 units. Selection of this part is appropriate for applications requiring regulatory compliance and maximum supply availability.

Both substitute parts are active products with confirmed stock levels. Selection between CD5CC100DO3F and CMR03C100DOCR depends on series preference and supply chain requirements, as both provide equivalent functional performance and superior compliance status.

Frequently Asked Questions (FAQ)

Q: Can CD5CC100DO3F be used as a direct replacement for CD5CC100DO3?

A: Yes. The CD5CC100DO3F maintains identical capacitance (10 pF), tolerance (±0.5 pF), voltage rating (300 V), dielectric material (Mica), mounting type (Through Hole), package configuration (Radial), lead spacing (0.118" / 3.00 mm), physical dimensions (0.272" L x 0.110" W / 6.90 mm x 2.80 mm), height (0.189" / 4.80 mm), and operating temperature range (-55°C to 125°C). Direct substitution is supported.

Q: Can CMR03C100DOCR be used as a direct replacement for CD5CC100DO3?

A: Yes. The CMR03C100DOCR maintains identical capacitance (10 pF), tolerance (±0.5 pF), voltage rating (300 V), dielectric material (Mica), mounting type (Through Hole), package configuration (Radial), lead spacing (0.118" / 3.00 mm), physical dimensions (0.272" L x 0.110" W / 6.90 mm x 2.80 mm), height (0.189" / 4.80 mm), and operating temperature range (-55°C to 125°C). Direct substitution is supported.

Q: What is the difference between CD5CC100DO3 and CD5CC100DO3F?

A: Both parts are identical in electrical and mechanical specifications. The primary difference is compliance status: CD5CC100DO3F is ROHS3 compliant and REACH unaffected, while CD5CC100DO3 is RoHS non-compliant and REACH affected.

Q: What is the difference between CD5CC100DO3F and CMR03C100DOCR?

A: Both parts are identical in electrical and mechanical specifications and compliance status (ROHS3 compliant, REACH unaffected). The difference is the series designation: CD5CC100DO3F belongs to the CD5 series, while CMR03C100DOCR belongs to the CMR series.

Q: Are all three parts interchangeable in PCB assembly?

A: Yes. All three parts share identical lead spacing (0.118" / 3.00 mm), physical dimensions (0.272" L x 0.110" W / 6.90 mm x 2.80 mm), and height (0.189" / 4.80 mm). PCB footprints designed for any one part accommodate all three without modification.

Q: Which substitute part should be selected for new designs?

A: For new designs, either CD5CC100DO3F or CMR03C100DOCR is recommended. Both offer ROHS3 compliance and REACH unaffected status. Selection between the two depends on series preference and supply chain strategy, as both provide equivalent performance and compliance.

Q: What is the moisture sensitivity level for all three parts?

A: All three parts have Moisture Sensitivity Level (MSL) 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.