CD5CC060DO3 Mica Capacitor Equivalent & Substitute Parts

Part Overview

The CD5CC060DO3 is a 6 pF mica capacitor rated for 300 V operation, manufactured by Cornell Dubilier Electronics (CDE) in the CD5 series. This through-hole radial component is designed for general-purpose applications requiring stable capacitance and high voltage performance across extended temperature ranges from -55°C to 125°C.

The CD5CC060DO3 remains an active product with current inventory availability. Identifying equivalent and substitute parts is necessary to support supply chain continuity, accommodate design revisions, and address specific compliance or packaging requirements in production environments.

Substiute Parts

CD5CC060DO3

Cornell Dubilier Electronics (CDE)In Stock: 1080CD5CC060DO3 Datasheet

Current PartRFQ

CD5CC060DO3F

Cornell Dubilier Electronics (CDE)In Stock: 981CD5CC060DO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CD5CC060DO3 are identified based on strict electrical and mechanical parameter matching. The substitution logic requires that alternative components maintain identical specifications across the following critical parameters:

Electrical Parameters (Non-negotiable):

• Capacitance value: 6 pF
• Tolerance: ±0.5 pF
• Voltage rating: 300 V minimum
• Dielectric material: Mica

Mechanical Parameters (Non-negotiable):

• Mounting type: Through Hole
• Package configuration: Radial
• Lead spacing: 0.118" (3.00 mm)
• Physical dimensions: 0.272" L x 0.110" W (6.90 mm x 2.80 mm)
• Maximum seated height: 0.189" (4.80 mm)

Environmental Parameters (Non-negotiable):

• Operating temperature range: -55°C to 125°C

Components meeting all these criteria are classified as direct parametric equivalents and may be substituted without circuit redesign or PCB layout modification.

Parameter Comparison

Engineering Selection Recommendations

The CD5CC060DO3F is a direct parametric equivalent to the CD5CC060DO3. Both components are manufactured by Cornell Dubilier Electronics in the CD5 series and share identical electrical, mechanical, and environmental specifications.

Selection Basis:

The primary distinction between these parts is regulatory compliance status. The CD5CC060DO3F carries ROHS3 compliance certification and REACH Unaffected status, whereas the CD5CC060DO3 is RoHS non-compliant and REACH Affected. This difference is significant for applications subject to European Union regulatory requirements or customer-mandated compliance standards.

For applications with no specific compliance requirements, either part may be selected based on availability and lead time. For applications requiring RoHS3 compliance or REACH compliance, the CD5CC060DO3F is the appropriate selection.

Both parts maintain identical moisture sensitivity levels (MSL 1 - Unlimited), indicating no special handling or storage requirements during manufacturing and assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the CD5CC060DO3F be used as a direct replacement for the CD5CC060DO3 in existing designs?

A: Yes. The CD5CC060DO3F is a direct parametric equivalent. All electrical specifications (capacitance, tolerance, voltage rating), mechanical dimensions (lead spacing, package size, height), and environmental operating ranges are identical. No circuit redesign or PCB layout modification is required.

Q: What is the difference between the CD5CC060DO3 and CD5CC060DO3F?

A: The components are electrically and mechanically identical. The CD5CC060DO3F carries ROHS3 compliance certification and REACH Unaffected status, while the CD5CC060DO3 is RoHS non-compliant and REACH Affected. Selection depends on regulatory requirements applicable to the end application.

Q: Are there any lead time or inventory considerations when substituting between these parts?

A: Current inventory shows 1027 units of CD5CC060DO3 and 884 units of CD5CC060DO3F in stock. Availability may vary based on production demand and supply chain conditions. Consult current inventory status for specific procurement timelines.

Q: Do these capacitors require special handling during assembly?

A: Both parts carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity. Standard through-hole assembly processes apply without special baking, storage, or handling requirements.

Q: Can these parts be used in applications requiring higher voltage ratings?

A: No. Both components are rated for 300 V maximum. Applications requiring higher voltage ratings require selection of alternative capacitor models with higher voltage specifications.

Q: Are the physical dimensions identical between CD5CC060DO3 and CD5CC060DO3F?

A: Yes. Both parts share identical dimensions: 0.272" L x 0.110" W (6.90 mm x 2.80 mm) with maximum seated height of 0.189" (4.80 mm). Lead spacing is 0.118" (3.00 mm) for both variants. PCB footprints are interchangeable.