CD5CC010CO3 Equivalent & Substitute Parts

Part Overview

The CD5CC010CO3 is a 1 pF mica capacitor rated for 300 V operation in a radial through-hole package, manufactured by Cornell Dubilier Electronics (CDE). This component is classified as active and suitable for general-purpose applications requiring stable capacitance and high voltage tolerance. The part is currently in stock with 1,087 units available.

Identification of equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and accommodate varying compliance requirements across different manufacturing and regulatory environments.

Substiute Parts

CD5CC010CO3

Cornell Dubilier Electronics (CDE)In Stock: 1156CD5CC010CO3 Datasheet

Current PartRFQ

CD5CC010CO3F

Cornell Dubilier Electronics (CDE)In Stock: 890CD5CC010CO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CD5CC010CO3 is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 1 pF (exact match required)
• Capacitance Tolerance: ±1 pF (exact match required)
• Voltage Rating: 300 V (minimum requirement; higher ratings acceptable)
• Dielectric Material: Mica (material type must match)
• Mounting Type: Through Hole (package configuration must match)
• Package Style: Radial (physical form factor must match)
• Lead Spacing: 0.118" / 3.00 mm (mechanical compatibility required)
• Operating Temperature Range: -55°C to 125°C (minimum requirement; wider ranges acceptable)

The CD5CC010CO3F qualifies as a parametric equivalent substitute. Both parts share identical electrical specifications, physical dimensions, and thermal operating range. The primary distinction lies in regulatory compliance status.

Parameter Comparison

Engineering Selection Recommendations

CD5CC010CO3 is appropriate for applications where RoHS non-compliance is acceptable and REACH-affected material sourcing is permissible. Current inventory: 1,087 units.

CD5CC010CO3F is the required selection for designs subject to ROHS3 compliance mandates or applications requiring REACH-unaffected component sourcing. This variant maintains full electrical and mechanical equivalence to the primary part while satisfying enhanced regulatory requirements. Current inventory: 835 units.

Both parts are active products from the same manufacturer and series. Selection between them depends solely on regulatory compliance requirements applicable to the end application and target market.

Frequently Asked Questions (FAQ)

Q: Are CD5CC010CO3 and CD5CC010CO3F electrically interchangeable?

A: Yes. Both parts have identical capacitance (1 pF), tolerance (±1 pF), voltage rating (300 V), dielectric material (mica), and operating temperature range (-55°C to 125°C). They are direct electrical equivalents.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. Both parts share identical physical dimensions, lead spacing (0.118" / 3.00 mm), package style (radial through-hole), and seated height (0.189" / 4.80 mm). No PCB layout modifications are required when substituting between them.

Q: What is the difference between CD5CC010CO3 and CD5CC010CO3F?

A: The primary differences are regulatory compliance status. CD5CC010CO3F is ROHS3 compliant and REACH unaffected, while CD5CC010CO3 is RoHS non-compliant and REACH affected. All electrical and mechanical specifications are identical.

Q: Which part should I specify for a new design?

A: Specify CD5CC010CO3F if your application or target market requires ROHS3 compliance or REACH-unaffected sourcing. Specify CD5CC010CO3 only if regulatory requirements explicitly permit RoHS non-compliant components.

Q: Are there any performance differences between these parts?

A: No. Both parts operate identically across all electrical parameters, temperature range, and mechanical characteristics. Performance is equivalent.

Q: What is the moisture sensitivity level for these capacitors?

A: Both parts have MSL 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.