CD4060BPWRE4 Equivalent & Substitute Parts

Part Overview

The CD4060BPWRE4 is a 14-bit binary counter IC manufactured by Texas Instruments, part of the 4000B CMOS logic series. This component functions as a negative-edge-triggered counter with asynchronous reset capability, designed for digital counting and frequency division applications across a wide supply voltage range of 3V to 18V.

The CD4060BPWRE4 has been discontinued at DiGi Electronics, creating a requirement to identify functionally equivalent alternatives. While 692 pieces remain in current inventory, long-term availability cannot be assured for new designs or production replenishment. Identifying qualified substitute parts ensures design continuity and supply chain reliability.

Substiute Parts

CD4060BPWRE4

Texas InstrumentsIn Stock: 724CD4060BPWRE4 Datasheet

Current PartRFQ

CD4060BPWR

Texas InstrumentsIn Stock: 55451CD4060BPWR Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CD4060BPWRE4 is determined by strict equivalence across the following critical parameters:

• Logic function: Binary counter with identical bit width (14-bit) and count direction (up)
• Trigger characteristics: Negative-edge triggering with asynchronous reset
• Electrical performance: Count rate of 12 MHz and supply voltage range of 3V to 18V
• Physical compatibility: 16-TSSOP package with surface mount configuration
• Environmental compliance: ROHS3 compliance and MSL rating of 1

The CD4060BPWR qualifies as a direct substitute based on identical specifications across all these parameters. The primary distinction is product status and packaging availability, not functional or electrical characteristics.

Parameter Comparison

Engineering Selection Recommendations

The CD4060BPWR is a direct functional equivalent to the CD4060BPWRE4 with no electrical or mechanical compromises. Both parts share identical specifications across all critical parameters including logic function, timing characteristics, voltage range, temperature rating, and package configuration.

The primary advantage of selecting CD4060BPWR is active product status with significantly higher inventory availability (55,400 pieces versus 692 pieces). Both parts maintain ROHS3 compliance and unlimited moisture sensitivity rating, ensuring regulatory and environmental compatibility.

For new designs or production replenishment, CD4060BPWR is the appropriate selection. For existing inventory management of discontinued CD4060BPWRE4 stock, both parts are electrically and mechanically interchangeable without circuit modification or re-qualification.

Frequently Asked Questions (FAQ)

Q: Are CD4060BPWRE4 and CD4060BPWR pin-for-pin compatible?

A: Yes. Both parts use the 16-TSSOP package with identical pinout. No circuit board modifications are required for substitution.

Q: What is the difference between the two part numbers?

A: The primary difference is product status and packaging availability. CD4060BPWRE4 is discontinued; CD4060BPWR is active. Both are manufactured by Texas Instruments with identical electrical and mechanical specifications.

Q: Can CD4060BPWR be used in applications originally designed for CD4060BPWRE4?

A: Yes. CD4060BPWR meets all functional and environmental requirements of the original specification. No design changes are necessary.

Q: What packaging options are available for the substitute part?

A: CD4060BPWR is available in Cut Tape (CT) and Digi-Reel® formats, providing flexibility for both prototype and production quantities.

Q: Are both parts RoHS compliant?

A: Yes. Both CD4060BPWRE4 and CD4060BPWR are ROHS3 compliant with MSL rating of 1 (unlimited moisture sensitivity).

Q: What is the maximum operating frequency for these counter ICs?

A: Both parts support a count rate of 12 MHz with supply voltage range of 3V to 18V and operating temperature range of -55°C to 125°C.