CD4060BMT 14-Bit Binary Counter - Equivalent & Substitute Parts

Part Overview

The CD4060BMT is a 14-bit binary counter IC manufactured by Texas Instruments in the 4000B CMOS logic series. This device functions as a negative-edge-triggered counter with asynchronous reset capability, designed for frequency division and timing applications across industrial and consumer electronics. The CD4060BMT is currently discontinued at DiGi Electronics, making equivalent substitute parts necessary for ongoing production and maintenance applications. Substitute parts must maintain functional equivalence in counter operation, bit width, trigger characteristics, and package compatibility while meeting the same compliance and environmental standards.

Key Parameters

Parameter	Value
Logic Type	Binary Counter
Number of Bits per Element	14 Bit
Direction	Up
Number of Elements	1
Trigger Type	Negative Edge
Reset	Asynchronous
Count Rate	12 MHz
Voltage - Supply	3 V ~ 18 V
Operating Temperature	-55°C ~ 125°C
Package / Case	16-SOIC (0.154", 3.90mm Width)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the CD4060BMT is determined by strict equivalence in the following parameters:

Counter Architecture: 14-bit binary counter, single element, up-counting direction
Trigger Mechanism: Negative-edge triggering with asynchronous reset
Package Compatibility: 16-SOIC surface-mount package (0.154" width, 3.90mm)
Electrical Specifications: Supply voltage range, operating temperature range, and count rate capability
Compliance Standards: RoHS3 compliance, MSL rating, and REACH status

Substitute parts are grouped into two categories:

Parametric Equivalents - Parts with identical electrical and functional specifications, differing only in packaging format or product status
Direct Manufacturer Alternatives - Parts from alternative manufacturers meeting the same functional requirements with minor variations in maximum count rate or temperature range

Parameter Comparison

Parameter	CD4060BMT (Main)	CD4060BM96	MC14060BDR2G	HEF4060BT,653	HEC4060BT,112	HEC4060BT,118
Manufacturer	Texas Instruments	Texas Instruments	onsemi	Nexperia USA Inc.	NXP USA Inc.	NXP USA Inc.
Logic Type	Binary Counter	Binary Counter	Binary Counter	Binary Counter	Binary Counter	Binary Counter
Number of Bits	14	14	14	14	14	14
Direction	Up	Up	Up	Up	Up	Up
Trigger Type	Negative Edge	Negative Edge	Negative Edge	Negative Edge	Negative Edge	Negative Edge
Reset	Asynchronous	Asynchronous	Not specified	Asynchronous	Asynchronous	Asynchronous
Count Rate	12 MHz	12 MHz	17 MHz	30 MHz	30 MHz	30 MHz
Voltage - Supply	3 V ~ 18 V	3 V ~ 18 V	3 V ~ 18 V	3 V ~ 15 V	3 V ~ 15 V	3 V ~ 15 V
Operating Temperature	-55°C ~ 125°C	-55°C ~ 125°C	-55°C ~ 125°C	-40°C ~ 85°C	-40°C ~ 85°C	-40°C ~ 85°C
Package / Case	16-SOIC	16-SOIC	16-SOIC	16-SOIC	16-SOIC	16-SOIC
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Product Status	Discontinued	Active	Active	Active	Active	Active
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
MSL Rating	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)

Engineering Selection Recommendations

CD4060BM96 (Texas Instruments) is the primary substitute for CD4060BMT. Both parts are manufactured by Texas Instruments within the 4000B series and maintain identical electrical specifications, counter architecture, and temperature range. The CD4060BM96 is currently in active production status with significantly higher inventory availability (97,700 units). The only difference is packaging format: CD4060BM96 is supplied in Cut Tape and Digi-Reel format versus the original Tape & Reel packaging. This part is suitable for direct replacement in all applications where the CD4060BMT was specified.

MC14060BDR2G (onsemi) provides an alternative from a different manufacturer while maintaining the 4000B series compatibility. This part supports a higher maximum count rate of 17 MHz compared to the 12 MHz specification of the CD4060BMT, making it suitable for applications requiring higher frequency operation. The MC14060BDR2G maintains the full supply voltage range (3 V ~ 18 V) and extended temperature range (-55°C ~ 125°C) of the original part. Reset specification is not provided for this part.

HEF4060BT,653 (Nexperia USA Inc.) and HEC4060BT,112/HEC4060BT,118 (NXP USA Inc.) represent alternatives from NXP-affiliated manufacturers. These parts operate at a higher maximum count rate of 30 MHz but have a reduced supply voltage range (3 V ~ 15 V) and narrower operating temperature range (-40°C ~ 85°C) compared to the CD4060BMT. These parts are suitable only for applications where the reduced voltage and temperature specifications are acceptable. All three NXP-based alternatives maintain RoHS3 compliance and MSL rating 1.

Selection should prioritize CD4060BM96 for direct replacement. Alternative manufacturers should be selected only when supply constraints exist or when the higher count rate capability is required for the application.

Frequently Asked Questions (FAQ)

Q: Can CD4060BM96 be used as a direct replacement for CD4060BMT?

A: Yes. CD4060BM96 is a parametric equivalent manufactured by Texas Instruments with identical electrical specifications, counter architecture, and package type. The only difference is the packaging format (Cut Tape/Digi-Reel versus Tape & Reel). Both parts are pin-compatible and functionally equivalent for all applications.

Q: What is the key difference between Texas Instruments and onsemi versions?

A: The MC14060BDR2G from onsemi supports a higher maximum count rate of 17 MHz versus 12 MHz for the Texas Instruments CD4060BMT and CD4060BM96. Both maintain the same supply voltage range (3 V ~ 18 V) and extended temperature range (-55°C ~ 125°C). The onsemi part is suitable for higher-frequency applications.

Q: Why do NXP parts have different voltage and temperature specifications?

A: HEF4060BT,653 and HEC4060BT variants from NXP have a reduced supply voltage range (3 V ~ 15 V) and narrower operating temperature range (-40°C ~ 85°C) compared to the CD4060BMT. These specifications reflect the design parameters of the NXP implementation. These parts are suitable only for applications operating within these reduced ranges.

Q: Are all substitute parts in the same 16-SOIC package?

A: Yes. All substitute parts listed are housed in the 16-SOIC surface-mount package with 0.154" width and 3.90mm body width. Pin configuration and footprint compatibility are maintained across all alternatives.

Q: Do all substitute parts meet RoHS3 compliance?

A: Yes. All substitute parts listed are RoHS3 compliant with MSL rating 1 (Unlimited), matching the compliance status of the CD4060BMT.

Q: Which substitute part has the highest inventory availability?

A: CD4060BM96 from Texas Instruments has the highest inventory availability at 97,700 units in stock, followed by MC14060BDR2G from onsemi at 105,100 units. Both are suitable for immediate procurement.

Q: Can HEF4060BT,653 be used in applications requiring the full -55°C to 125°C temperature range?

A: No. HEF4060BT,653 operates only within -40°C to 85°C. This part is not suitable for applications requiring the extended temperature range of the original CD4060BMT. Use CD4060BM96 or MC14060BDR2G for extended temperature applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message