CD4010BPWRG4 Equivalent & Substitute Parts

Part Overview

The CD4010BPWRG4 is a non-inverting buffer logic integrated circuit manufactured by Texas Instruments, part of the 4000B CMOS logic series. This device provides 6 independent buffer elements with 1 bit per element and push-pull output configuration, designed for signal buffering and logic level conversion applications across a wide supply voltage range of 3V to 18V.

The CD4010BPWRG4 is currently discontinued at DiGi Electronics, making identification of equivalent substitute parts essential for ongoing production and maintenance applications. The device is available in 16-TSSOP surface mount packaging with 751 units in current stock inventory.

Substiute Parts

CD4010BPWRG4

Texas InstrumentsIn Stock: 768CD4010BPWRG4 Datasheet

Current PartRFQ

CD4010BPWR

Texas InstrumentsIn Stock: 1834CD4010BPWR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CD4010BPWRG4 is determined by strict equivalence across the following critical parameters:

• Logic type and function (Buffer, Non-Inverting)
• Number of elements (6) and bits per element (1)
• Output configuration (Push-Pull)
• Output current specifications (3mA high, 36mA low)
• Supply voltage range (3V ~ 18V)
• Operating temperature range (-55°C ~ 125°C)
• Package type and physical dimensions (16-TSSOP)
• Mounting configuration (Surface Mount)
• Compliance certifications (ROHS3, REACH Unaffected)

Only parts meeting all these parameters are considered direct parametric equivalents. Packaging variant differences (such as tape & reel versus alternative distribution formats) do not affect functional substitutability.

Parameter Comparison

Engineering Selection Recommendations

The CD4010BPWR is a direct parametric equivalent to the CD4010BPWRG4. Both parts are manufactured by Texas Instruments and share identical electrical specifications, package configuration, and compliance certifications.

The primary distinction between these parts is product status and availability. The CD4010BPWRG4 is discontinued at DiGi Electronics, while the CD4010BPWR maintains active product status with higher inventory availability (1821 units versus 751 units). Both parts maintain ROHS3 compliance and REACH unaffected status, ensuring regulatory compatibility in equivalent applications.

For new designs or production requiring long-term component availability, the CD4010BPWR is the preferred selection due to its active product status. For existing inventory management or legacy system maintenance, the CD4010BPWRG4 remains functionally equivalent where current stock is available.

Frequently Asked Questions (FAQ)

Q: Can the CD4010BPWR be used as a direct replacement for the CD4010BPWRG4?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, output characteristics, supply voltage range, operating temperature range, and 16-TSSOP package configuration. No circuit modifications are required.

Q: What is the difference between CD4010BPWRG4 and CD4010BPWR?

A: The parts are functionally identical. The difference is product status: CD4010BPWRG4 is discontinued at DiGi Electronics, while CD4010BPWR is active. The CD4010BPWR has higher current inventory availability.

Q: Are there any package or pinout differences between these parts?

A: No. Both parts use the 16-TSSOP package with identical physical dimensions (0.173" width, 4.40mm) and surface mount configuration. Pinout and PCB footprint compatibility is complete.

Q: Do both parts meet the same compliance requirements?

A: Yes. Both CD4010BPWRG4 and CD4010BPWR are ROHS3 compliant and REACH unaffected, with identical moisture sensitivity level (MSL 1 - Unlimited).

Q: What are the critical parameters that define substitutability for this device?

A: Substitutability is determined by: logic type (non-inverting buffer), element count (6), bits per element (1), output type (push-pull), output current ratings (3mA/36mA), supply voltage range (3V-18V), operating temperature (-55°C to 125°C), and package type (16-TSSOP surface mount).