CD30FD822FO3 Mica Capacitor 8200 pF 500V Radial Equivalent & Substitute Parts

Part Overview

The CD30FD822FO3 is an 8200 pF mica capacitor rated for 500 V with ±1% tolerance, manufactured by Cornell Dubilier Electronics (CDE). This through-hole radial component operates across the temperature range of -55°C to 125°C and is classified as a general-purpose capacitor. The part is currently active in production. Identifying equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and address specific compliance or availability requirements.

Substiute Parts

CD30FD822FO3

Cornell Dubilier Electronics (CDE)In Stock: 1052CD30FD822FO3 Datasheet

Current PartRFQ

CD30FD822FO3F

Cornell Dubilier Electronics (CDE)In Stock: 1993CD30FD822FO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CD30FD822FO3 is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 8200 pF (exact match required)
• Tolerance: ±1% (exact match required)
• Voltage Rating: 500 V (exact match required)
• Dielectric Material: Mica (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial (exact match required)
• Lead Spacing: 0.437" / 11.10 mm (exact match required)
• Physical Dimensions: 0.791" L x 0.319" W / 20.10 mm x 8.10 mm (exact match required)
• Maximum Seated Height: 0.882" / 22.40 mm (exact match required)

Substitute parts must satisfy all electrical and mechanical parameters listed above to ensure direct interchangeability in circuit applications without design modification or re-qualification.

Parameter Comparison

Engineering Selection Recommendations

CD30FD822FO3F is the direct parametric equivalent to CD30FD822FO3. Both parts are manufactured by Cornell Dubilier Electronics within the CD30 series and satisfy identical electrical and mechanical specifications.

The primary distinction between these parts is regulatory compliance status:

• CD30FD822FO3: RoHS non-compliant; REACH Affected
• CD30FD822FO3F: ROHS3 Compliant; REACH Unaffected

Selection between these parts should be based on the regulatory requirements of the end application and target market. Applications subject to RoHS3 or REACH restrictions require the CD30FD822FO3F variant. Applications without such regulatory constraints may utilize either part. Both parts maintain identical electrical performance, physical form factor, and thermal operating characteristics.

Frequently Asked Questions (FAQ)

Q: Can CD30FD822FO3F be used as a direct replacement for CD30FD822FO3 in existing designs?

A: Yes. CD30FD822FO3F is a direct parametric equivalent. All electrical specifications (capacitance, tolerance, voltage rating, temperature range) and mechanical dimensions (lead spacing, package size, height) are identical. No circuit modification or PCB redesign is required.

Q: What is the difference between CD30FD822FO3 and CD30FD822FO3F?

A: The parts are electrically and mechanically identical. The difference is in regulatory compliance: CD30FD822FO3F is ROHS3 Compliant and REACH Unaffected, while CD30FD822FO3 is RoHS non-compliant and REACH Affected.

Q: Which part should I specify for new designs?

A: Specify CD30FD822FO3F for new designs if the application is subject to RoHS3 or REACH regulations. Both parts are active in production and available in stock.

Q: Are the physical dimensions identical between these parts?

A: Yes. Both parts have identical lead spacing (0.437" / 11.10 mm), body dimensions (0.791" L x 0.319" W / 20.10 mm x 8.10 mm), and maximum seated height (0.882" / 22.40 mm). They are mechanically interchangeable on PCBs designed for radial through-hole capacitors.

Q: Do these parts have the same temperature operating range?

A: Yes. Both CD30FD822FO3 and CD30FD822FO3F operate across -55°C to 125°C.

Q: What is the tolerance specification for these capacitors?

A: Both parts have ±1% tolerance on the 8200 pF capacitance value.