CD30FD752GO3 Equivalent & Substitute Parts

Part Overview

The CD30FD752GO3 is a 7500 pF mica capacitor rated for 500 V operation, manufactured by Cornell Dubilier Electronics (CDE). This radial through-hole component is designed for general-purpose applications requiring high voltage and stable capacitance performance across extended temperature ranges. The part is currently active in production with 960 units in stock.

Identifying equivalent and substitute parts is necessary when the primary part number becomes unavailable, when alternative compliance certifications are required, or when inventory constraints necessitate sourcing from alternative stock positions.

Substiute Parts

CD30FD752GO3

Cornell Dubilier Electronics (CDE)In Stock: 1044CD30FD752GO3 Datasheet

Current PartRFQ

CD30FD752GO3F

Cornell Dubilier Electronics (CDE)In Stock: 1048CD30FD752GO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CD30FD752GO3 is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 7500 pF (exact match required)
• Tolerance: ±2% (exact match required)
• Voltage Rating: 500 V (exact match required)
• Dielectric Material: Mica (exact match required)
• Mounting Configuration: Through Hole, Radial package (exact match required)
• Lead Spacing: 0.437" (11.10 mm) (exact match required)
• Physical Footprint: 0.791" L × 0.311" W, 0.882" maximum seated height (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes. Variations in compliance certifications (RoHS, REACH) do not affect electrical or mechanical compatibility but may influence procurement decisions based on regulatory requirements.

Parameter Comparison

Engineering Selection Recommendations

CD30FD752GO3F is a direct parametric equivalent to CD30FD752GO3. All electrical and mechanical specifications are identical, including capacitance, tolerance, voltage rating, dielectric material, mounting configuration, and physical footprint.

The primary distinction between these parts is regulatory compliance status:

• CD30FD752GO3: RoHS non-compliant, REACH Affected
• CD30FD752GO3F: RoHS3 Compliant, REACH Unaffected

Selection between these equivalent parts should be based on applicable regulatory requirements for the end application and target market. Both parts are active products with adequate inventory availability. The "F" suffix designation in CD30FD752GO3F indicates RoHS3 compliance certification.

Frequently Asked Questions (FAQ)

Q: Can CD30FD752GO3F be used as a direct replacement for CD30FD752GO3?

A: Yes. CD30FD752GO3F is a parametric equivalent with identical electrical and mechanical specifications. All critical parameters including capacitance (7500 pF), tolerance (±2%), voltage rating (500 V), dielectric material (Mica), mounting type (Through Hole, Radial), lead spacing (0.437"), and physical dimensions are identical. The parts are interchangeable from an electrical and mechanical standpoint.

Q: What is the difference between CD30FD752GO3 and CD30FD752GO3F?

A: The parts differ only in regulatory compliance certifications. CD30FD752GO3F carries RoHS3 compliance and REACH Unaffected status, while CD30FD752GO3 is RoHS non-compliant and REACH Affected. No electrical or mechanical differences exist between these parts.

Q: Are there any physical footprint differences between these parts?

A: No. Both parts share identical physical dimensions: 0.791" length × 0.311" width (20.10 mm × 7.90 mm), with a maximum seated height of 0.882" (22.40 mm). Lead spacing is 0.437" (11.10 mm) for both parts. PCB layout and mounting hole spacing are identical.

Q: Which part should I select for new designs?

A: Selection depends on regulatory requirements applicable to your end application and target markets. For applications requiring RoHS3 compliance or REACH compliance, specify CD30FD752GO3F. For applications without these regulatory constraints, either part is acceptable based on availability and procurement preferences.

Q: Are both parts currently available?

A: Yes. CD30FD752GO3 has 960 units in stock, and CD30FD752GO3F has 945 units in stock. Both parts are active products manufactured by Cornell Dubilier Electronics.