CD30FD562JO3 Mica Capacitor 5600 pF 500V Radial

Part Overview

The CD30FD562JO3 is a 5600 pF mica capacitor rated for 500V with radial leads, manufactured by Cornell Dubilier Electronics (CDE). This component is an Active product currently in stock with 769 units available. Mica capacitors of this specification are used in applications requiring stable capacitance, low loss, and reliable performance across extended temperature ranges. Alternative part numbers may be required due to component availability, RoHS compliance requirements, or inventory considerations.

Substiute Parts

CD30FD562JO3

Cornell Dubilier Electronics (CDE)In Stock: 866CD30FD562JO3 Datasheet

Current PartRFQ

CD30FD562JO3F

Cornell Dubilier Electronics (CDE)In Stock: 1065CD30FD562JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CD30FD562JO3 is determined by strict matching of the following critical electrical and mechanical parameters: capacitance value (5600 pF), tolerance (±5%), rated voltage (500 V), dielectric material (Mica), operating temperature range (-55°C to 125°C), mounting type (Through Hole), package type (Radial), and mechanical dimensions including lead spacing (0.437"), overall length (0.780"), width (0.291"), and seated height (0.870"). The substitute part must belong to the same CD30 series to ensure performance equivalency. Variations in RoHS compliance status, REACH classification, or inventory availability do not affect electrical or mechanical compatibility and do not preclude substitution based on electrical function.

Parameter Comparison

Engineering Selection Recommendations

The CD30FD562JO3F serves as a direct parametric equivalent to the CD30FD562JO3, matching all electrical and mechanical specifications. The primary differentiation lies in regulatory compliance status. The CD30FD562JO3F is ROHS3 compliant and REACH unaffected, whereas the CD30FD562JO3 is RoHS non-compliant and REACH affected. For applications subject to RoHS3 or REACH regulatory requirements, the CD30FD562JO3F is the appropriate selection. Both parts maintain Active product status and are available in inventory. Selection should be based on applicable regulatory requirements for the end application.

Frequently Asked Questions (FAQ)

Q: Can the CD30FD562JO3F replace the CD30FD562JO3 in a circuit design? A: The CD30FD562JO3F is electrically and mechanically equivalent, with identical capacitance, voltage rating, tolerance, operating temperature range, and physical dimensions. Direct substitution is valid from a functional standpoint.

Q: What is the difference between CD30FD562JO3 and CD30FD562JO3F? A: Both parts are identical in electrical performance and mechanical form factor. The difference is in regulatory compliance: the CD30FD562JO3F is ROHS3 compliant and REACH unaffected, while the CD30FD562JO3 is RoHS non-compliant and REACH affected.

Q: Why would I choose one part over the other? A: Selection depends on regulatory requirements. If your application or market requires ROHS3 compliance or REACH compliance, use the CD30FD562JO3F. Otherwise, both parts provide identical functionality.

Q: Are the physical dimensions identical between both part numbers? A: Yes. Both parts have identical lead spacing (0.437"), length (0.780"), width (0.291"), and maximum seated height (0.870"). No PCB layout modifications are required when switching between these parts.

Q: What is the temperature operating range for these capacitors? A: Both the CD30FD562JO3 and CD30FD562JO3F operate from -55°C to 125°C.