CD30FD223JO3 Equivalent & Substitute Parts

Part Overview

The CD30FD223JO3 is a 0.022 µF mica capacitor rated for 500 V operation in a radial through-hole configuration, manufactured by Cornell Dubilier Electronics (CDE). This component is classified as a general-purpose mica capacitor suitable for applications requiring stable capacitance and high voltage performance across extended temperature ranges. The part maintains active product status with 872 units currently in stock.

Identification of equivalent and substitute parts becomes necessary when addressing supply chain constraints, compliance requirements, or inventory optimization while maintaining identical electrical and mechanical performance characteristics.

Substiute Parts

CD30FD223JO3

Cornell Dubilier Electronics (CDE)In Stock: 888CD30FD223JO3 Datasheet

Current PartRFQ

CD30FD223JO3F

Cornell Dubilier Electronics (CDE)In Stock: 1337CD30FD223JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the CD30FD223JO3 is determined by strict equivalence across the following critical parameters:

Electrical Parameters: Capacitance value (0.022 µF), tolerance specification (±5%), and voltage rating (500 V) must match exactly. The mica dielectric material is a defining characteristic of this component class and cannot be substituted with alternative dielectric types.

Mechanical Parameters: Mounting configuration (through-hole radial), lead spacing (0.437" / 11.10 mm), and physical envelope dimensions must be identical to ensure direct board-level compatibility without layout modifications.

Thermal Parameters: Operating temperature range (-55°C to 125°C) establishes the functional performance envelope and must be maintained.

Series Designation: Parts must belong to the CD30 series to ensure manufacturing consistency and performance characteristics.

Substitute parts identified within this specification maintain 100% parametric alignment with the primary part number across all electrical, mechanical, and thermal criteria.

Parameter Comparison

Engineering Selection Recommendations

CD30FD223JO3F qualifies as a direct parametric equivalent to CD30FD223JO3 based on complete alignment of electrical, mechanical, and thermal specifications. Both parts are manufactured by Cornell Dubilier Electronics within the CD30 series and maintain identical performance characteristics across all critical operating parameters.

The CD30FD223JO3F substitute offers two additional advantages:

Regulatory Compliance: The substitute part achieves RoHS3 compliance status, whereas the primary part is RoHS non-compliant. For applications subject to RoHS directives, the substitute part satisfies regulatory requirements without functional or performance compromise.

Supply Chain Status: The substitute part maintains higher current inventory (1294 units versus 872 units), providing improved availability for procurement planning.

REACH Compliance: The substitute part is REACH Unaffected, compared to the primary part's REACH Affected status, reducing regulatory documentation requirements in certain jurisdictions.

Selection between these parts should be based on compliance requirements specific to the end application and supply chain availability. Both parts deliver identical electrical performance and board-level compatibility.

Frequently Asked Questions (FAQ)

Q: Can CD30FD223JO3F be used as a direct replacement for CD30FD223JO3 in existing designs?

A: Yes. The CD30FD223JO3F is a parametric equivalent with identical capacitance (0.022 µF), voltage rating (500 V), tolerance (±5%), mounting configuration (radial through-hole), lead spacing (0.437" / 11.10 mm), and physical dimensions. No circuit modifications or PCB layout changes are required.

Q: What is the difference between these two part numbers?

A: The primary difference is regulatory compliance status. CD30FD223JO3F achieves RoHS3 compliance and REACH Unaffected status, while CD30FD223JO3 is RoHS non-compliant and REACH Affected. Electrical and mechanical specifications are identical.

Q: Are there any temperature or voltage derating considerations when substituting?

A: No. Both parts operate across the identical temperature range (-55°C to 125°C) and share the same 500 V voltage rating. Operating parameters remain unchanged.

Q: Will the substitute part fit the same PCB footprint?

A: Yes. Lead spacing (0.437" / 11.10 mm), physical envelope (0.831" L × 0.461" W), and maximum seated height (0.929") are identical. Direct board-level substitution is supported without layout modifications.

Q: Which part should be selected for new designs?

A: For new designs subject to RoHS or REACH compliance requirements, CD30FD223JO3F is the appropriate selection. For applications without regulatory compliance constraints, either part is functionally equivalent.

Q: Is inventory availability a factor in part selection?

A: CD30FD223JO3F maintains higher current stock (1294 units) compared to CD30FD223JO3 (872 units). For time-sensitive procurement, the substitute part offers improved lead time performance.