CD19FD162JO3 Equivalent & Substitute Parts

Part Overview

The CD19FD162JO3 is a 1600 pF mica capacitor rated for 500 V with ±5% tolerance, manufactured by Cornell Dubilier Electronics (CDE). This through-hole radial component operates across the temperature range of -55°C to 125°C and is classified as a general-purpose capacitor. The part is currently active in production with 925 units in stock.

Identifying equivalent and substitute parts is necessary when the primary part becomes unavailable, when compliance requirements change, or when design revisions require updated component specifications. The substitute identified maintains identical electrical and mechanical parameters while offering improved regulatory compliance.

Substiute Parts

CD19FD162JO3

Cornell Dubilier Electronics (CDE)In Stock: 939CD19FD162JO3 Datasheet

Current PartRFQ

CD19FD162JO3F

Cornell Dubilier Electronics (CDE)In Stock: 1006CD19FD162JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CD19FD162JO3 is determined by strict equivalence across all critical electrical and mechanical parameters. The substitute part CD19FD162JO3F maintains identical specifications in the following key areas:

• Capacitance Value: 1600 pF (exact match)
• Tolerance: ±5% (exact match)
• Voltage Rating: 500 V (exact match)
• Dielectric Material: Mica (exact match)
• Operating Temperature Range: -55°C to 125°C (exact match)
• Mounting Configuration: Through Hole Radial (exact match)
• Physical Dimensions: 0.661" L x 0.228" W, 0.532" max height (exact match)
• Lead Spacing: 0.343" (8.70 mm) (exact match)

The substitute part differs only in regulatory compliance status, offering improved RoHS and REACH compliance characteristics while maintaining full electrical and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

CD19FD162JO3 is suitable for applications where RoHS non-compliance is acceptable and REACH-affected material usage is permitted. This part remains in active production with adequate inventory availability.

CD19FD162JO3F is the preferred selection for new designs and applications requiring RoHS3 compliance and REACH-unaffected status. This variant maintains complete electrical and mechanical equivalence while satisfying stricter regulatory requirements. The substitute part offers equivalent inventory availability and identical performance characteristics.

For applications subject to RoHS or REACH compliance mandates, CD19FD162JO3F is the appropriate selection. For legacy systems or applications without regulatory constraints, either part provides equivalent functionality.

Frequently Asked Questions (FAQ)

Q: Are CD19FD162JO3 and CD19FD162JO3F electrically identical?

A: Yes. Both parts are 1600 pF mica capacitors with ±5% tolerance, 500 V rating, and -55°C to 125°C operating temperature range. Electrical performance is identical.

Q: Can CD19FD162JO3F be used as a direct replacement for CD19FD162JO3?

A: Yes. The substitute part maintains identical capacitance, voltage rating, tolerance, dielectric material, operating temperature range, mounting type, package configuration, lead spacing, and physical dimensions. Direct substitution is possible without circuit modification.

Q: What is the difference between these two parts?

A: The primary differences are regulatory compliance status. CD19FD162JO3F is RoHS3 compliant and REACH unaffected, while CD19FD162JO3 is RoHS non-compliant and REACH affected. All electrical and mechanical specifications are identical.

Q: Which part should be selected for new designs?

A: CD19FD162JO3F is recommended for new designs due to improved regulatory compliance. Both parts are active in production with similar inventory levels.

Q: Are the physical dimensions and lead spacing identical?

A: Yes. Both parts have identical dimensions of 0.661" L x 0.228" W (16.80 mm x 5.80 mm), maximum seated height of 0.532" (13.50 mm), and lead spacing of 0.343" (8.70 mm). PCB layout compatibility is complete.

Q: Can these parts be used interchangeably in existing assemblies?

A: Yes. The parts are mechanically and electrically interchangeable. No circuit design changes or PCB modifications are required for substitution.