CD19FD132JO3F Equivalent & Substitute Parts

Part Overview

The CD19FD132JO3F is a 1300 pF mica capacitor manufactured by Cornell Dubilier Electronics (CDE), rated for 500 V operation in radial through-hole configuration. This component is classified as Active product status and is designed for general-purpose applications requiring stable capacitance and high voltage performance. Mica dielectric capacitors are selected for applications demanding low loss, excellent frequency stability, and reliable operation across extended temperature ranges from -55°C to 125°C. Substitute parts are identified when inventory constraints, compliance requirements, or packaging specifications necessitate alternative sourcing while maintaining electrical and mechanical compatibility.

Substiute Parts

CD19FD132JO3F

Cornell Dubilier Electronics (CDE)In Stock: 1078CD19FD132JO3F Datasheet

Current PartRFQ

CD19FD132JO3

Cornell Dubilier Electronics (CDE)In Stock: 1033CD19FD132JO3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the CD19FD132JO3F are identified based on strict electrical and mechanical parameter matching. The substitution logic is based on the following criteria:

Primary Matching Parameters:

• Capacitance value: 1300 pF (exact match required)
• Tolerance: ±5% (exact match required)
• Voltage rating: 500 V (exact match required)
• Dielectric material: Mica (exact match required)
• Mounting type: Through Hole (exact match required)
• Package configuration: Radial (exact match required)
• Lead spacing: 0.343" / 8.70 mm (exact match required)
• Operating temperature range: -55°C to 125°C (exact match required)

Secondary Considerations:

• Manufacturer: Cornell Dubilier Electronics (CDE)
• Series designation: CD19
• Product status: Active

Parts meeting all primary matching parameters are classified as parametric equivalents and direct substitutes. Variations in compliance status (RoHS, REACH) or packaging designation do not affect electrical or mechanical compatibility but may influence procurement decisions based on regulatory requirements.

Parameter Comparison

Engineering Selection Recommendations

CD19FD132JO3F Selection Criteria: The CD19FD132JO3F is the preferred selection for applications requiring ROHS3 compliance and REACH Unaffected status. This part number is suitable for regulated markets and applications with strict environmental compliance mandates. Current inventory of 999 pieces supports high-volume procurement requirements.

CD19FD132JO3 Selection Criteria: The CD19FD132JO3 is a parametric equivalent suitable for applications where RoHS3 compliance is not a requirement and REACH Affected status is acceptable. This part maintains identical electrical and mechanical specifications, including capacitance, voltage rating, temperature range, and physical dimensions. Selection of this substitute is appropriate when inventory availability of the primary part is constrained or when regulatory requirements do not mandate ROHS3 compliance. Current inventory of 956 pieces is available.

Compliance Considerations: Both parts are Active status products from Cornell Dubilier Electronics. The primary differentiation is regulatory compliance posture. Applications subject to RoHS3 or REACH regulations must specify CD19FD132JO3F. Applications without these regulatory constraints may utilize either part number based on availability and procurement optimization.

Frequently Asked Questions (FAQ)

Q: Can CD19FD132JO3 be used as a direct replacement for CD19FD132JO3F?

A: CD19FD132JO3 is a parametric equivalent with identical electrical and mechanical specifications. Direct PCB substitution is possible without circuit redesign or layout modification. The difference is regulatory compliance status only. Selection depends on application compliance requirements.

Q: What are the key electrical parameters that must match for substitution?

A: The following parameters must match exactly: capacitance (1300 pF), tolerance (±5%), voltage rating (500 V), dielectric material (Mica), and operating temperature range (-55°C to 125°C). All substitute parts listed meet these requirements.

Q: Are the physical dimensions identical between CD19FD132JO3F and CD19FD132JO3?

A: Yes. Both parts share identical dimensions: 0.661" L x 0.220" W (16.80 mm x 5.60 mm), maximum seated height of 0.520" (13.20 mm), and lead spacing of 0.343" (8.70 mm). PCB footprints are interchangeable.

Q: What is the difference between ROHS3 Compliant and RoHS non-compliant status?

A: ROHS3 Compliant (CD19FD132JO3F) indicates the part meets Restriction of Hazardous Substances Directive 3 requirements. RoHS non-compliant (CD19FD132JO3) does not meet these restrictions. Selection depends on market regulations and customer requirements.

Q: Can I use CD19FD132JO3 in a design requiring REACH Unaffected status?

A: No. CD19FD132JO3 is listed as REACH Affected, while CD19FD132JO3F is REACH Unaffected. Applications requiring REACH Unaffected status must use CD19FD132JO3F.

Q: Are both parts available in the same packaging format?

A: Yes. Both CD19FD132JO3F and CD19FD132JO3 are supplied in Bulk packaging as radial through-hole components with identical lead spacing and physical configuration.

Q: What is the temperature stability range for these mica capacitors?

A: Both parts operate across -55°C to 125°C. Mica dielectric provides stable capacitance performance throughout this temperature range, suitable for industrial and high-reliability applications.