CD19FD132GO3 Equivalent & Substitute Parts

Part Overview

The CD19FD132GO3 is a 1300 pF mica capacitor rated for 500 V with ±2% tolerance, manufactured by Cornell Dubilier Electronics (CDE). This radial through-hole component operates across the temperature range of -55°C to 125°C and is classified as a general-purpose capacitor. The part is currently active in production with 809 units in stock. Identifying equivalent substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and address specific compliance requirements such as RoHS status.

Substiute Parts

CD19FD132GO3

Cornell Dubilier Electronics (CDE)In Stock: 890CD19FD132GO3 Datasheet

Current PartRFQ

CD19FD132GO3F

Cornell Dubilier Electronics (CDE)In Stock: 840CD19FD132GO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CD19FD132GO3 is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 1300 pF (exact match required)
• Tolerance: ±2% (exact match required)
• Voltage Rating: 500 V (exact match required)
• Dielectric Material: Mica (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial (exact match required)
• Lead Spacing: 0.343" (8.70 mm) (exact match required)
• Physical Dimensions: 0.661" L x 0.220" W, Height 0.520" max (exact match required)

The substitute part CD19FD132GO3F meets all electrical and mechanical parameters identically to the main part. The primary distinction between these parts lies in compliance certifications: the substitute part is RoHS3 compliant and REACH unaffected, whereas the main part is RoHS non-compliant and REACH affected.

Parameter Comparison

Engineering Selection Recommendations

CD19FD132GO3 is suitable for applications where RoHS non-compliance is acceptable and REACH-affected materials are permitted. This part maintains full electrical and mechanical compatibility with designs requiring 1300 pF mica capacitors at 500 V.

CD19FD132GO3F is the appropriate selection for designs requiring RoHS3 compliance and REACH compliance. This substitute part provides identical electrical performance and mechanical fit while meeting modern regulatory requirements. Both parts are active products with adequate inventory availability.

Selection between these parts should be based on the specific regulatory and compliance requirements of the end application and target market.

Frequently Asked Questions (FAQ)

Q: Are CD19FD132GO3 and CD19FD132GO3F electrically interchangeable?

A: Yes. Both parts are 1300 pF mica capacitors with ±2% tolerance, 500 V rating, and identical operating temperature ranges. Electrical performance is equivalent.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes. Both parts share identical physical dimensions, lead spacing (0.343" / 8.70 mm), and radial through-hole mounting configuration. PCB layout and footprints are compatible.

Q: What is the primary difference between these substitute parts?

A: The primary difference is compliance certification. CD19FD132GO3F is RoHS3 compliant and REACH unaffected, while CD19FD132GO3 is RoHS non-compliant and REACH affected. All electrical and mechanical specifications are identical.

Q: Which part should be selected for new designs?

A: CD19FD132GO3F is recommended for new designs due to its RoHS3 compliance and REACH compliance status, ensuring compatibility with current regulatory requirements and market standards.

Q: Are there any temperature or voltage derating considerations between these parts?

A: No. Both parts operate identically across the -55°C to 125°C temperature range and maintain the same 500 V voltage rating.

Q: What is the lead spacing for these radial capacitors?

A: The lead spacing is 0.343 inches (8.70 mm) for both parts.