CD19FD102GO3 Equivalent & Substitute Parts

Part Overview

The CD19FD102GO3 is a 1000 pF mica capacitor rated for 500 V operation in a radial through-hole package. This component is manufactured by Cornell Dubilier Electronics (CDE) and is classified as Active product status. The CD19FD102GO3 is RoHS non-compliant and REACH Affected. Equivalent and substitute parts are identified for applications requiring alternative compliance certifications, series designations, or inventory availability while maintaining identical electrical and mechanical specifications.

Substiute Parts

CD19FD102GO3

Cornell Dubilier Electronics (CDE)In Stock: 743CD19FD102GO3 Datasheet

Current PartRFQ

CD19FD102GO3F

Cornell Dubilier Electronics (CDE)In Stock: 737CD19FD102GO3F Datasheet

Parametric EquivalentRFQ

CM06FD102GO3

Cornell Dubilier Electronics (CDE)In Stock: 759CM06FD102GO3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CD19FD102GO3 is determined by strict equivalence across all electrical and mechanical parameters. The following criteria establish valid substitution:

Electrical Parameters (Must Match):

• Capacitance: 1000 pF
• Tolerance: ±2%
• Voltage - Rated: 500 V
• Dielectric Material: Mica
• Operating Temperature Range: -55°C ~ 125°C

Mechanical Parameters (Must Match):

• Mounting Type: Through Hole
• Package / Case: Radial
• Lead Spacing: 0.343" (8.70mm)
• Size / Dimension: 0.650" L x 0.220" W (16.50mm x 5.60mm)
• Height - Seated (Max): 0.520" (13.20mm)

Allowable Variations:

• Series designation (CD19 vs. CM06)
• RoHS compliance status
• REACH compliance status
• Moisture Sensitivity Level (MSL)

All identified substitute parts meet these criteria and are direct functional equivalents for circuit applications.

Parameter Comparison

Engineering Selection Recommendations

CD19FD102GO3 (Original Part)

Use this part number for applications where RoHS non-compliance and REACH Affected status are acceptable. This part maintains the CD19 series designation and offers the highest current inventory availability at 710 pieces.

CD19FD102GO3F (Primary Substitute)

This part is the recommended substitute when ROHS3 compliance is required. The CD19FD102GO3F maintains identical electrical and mechanical specifications while providing REACH Unaffected status. Both parts share the CD19 series designation. Inventory availability is 639 pieces.

CM06FD102GO3 (Alternative Substitute)

This part is functionally equivalent across all electrical and mechanical parameters but belongs to the CM06 series. Use this part when CM06 series designation is specified or when CD19 series parts are unavailable. The CM06FD102GO3 carries MSL rating of 1 (Unlimited) and offers 738 pieces in inventory. RoHS and REACH status match the original CD19FD102GO3.

All three parts are Active status and suitable for direct substitution in circuit applications requiring 1000 pF, 500 V mica capacitors with radial through-hole mounting.

Frequently Asked Questions (FAQ)

Q: Can CD19FD102GO3F be used as a direct replacement for CD19FD102GO3?

A: Yes. The CD19FD102GO3F is a direct functional equivalent. Both parts share identical capacitance (1000 pF), tolerance (±2%), voltage rating (500 V), dielectric material (Mica), operating temperature range (-55°C ~ 125°C), and mechanical specifications including lead spacing (0.343"), package dimensions (0.650" L x 0.220" W), and height (0.520" max). The primary difference is ROHS3 compliance status of the CD19FD102GO3F versus non-compliance of the CD19FD102GO3.

Q: What is the difference between CD19FD102GO3 and CM06FD102GO3?

A: Both parts are electrically and mechanically identical with matching capacitance, voltage rating, tolerance, operating temperature, and physical dimensions. The primary differences are series designation (CD19 versus CM06) and MSL rating (Not Applicable versus 1 Unlimited). Both parts are RoHS non-compliant and REACH Affected.

Q: Are all three parts interchangeable on a printed circuit board?

A: Yes. All three parts share identical lead spacing (0.343" / 8.70mm), package type (Radial), and mounting method (Through Hole). Physical board layout compatibility is identical across all three part numbers.

Q: Which substitute should be selected for RoHS-compliant applications?

A: The CD19FD102GO3F is ROHS3 Compliant and is the appropriate selection for applications requiring RoHS compliance. The original CD19FD102GO3 and CM06FD102GO3 are both RoHS non-compliant.

Q: Does MSL rating affect circuit performance?

A: MSL (Moisture Sensitivity Level) does not affect electrical performance or circuit operation. MSL ratings govern handling, storage, and soldering procedures during manufacturing. The CM06FD102GO3 carries MSL 1 (Unlimited), while CD19FD102GO3 and CD19FD102GO3F are rated Not Applicable.

Q: What is the operating temperature range for all substitute parts?

A: All three parts operate across the identical temperature range of -55°C to 125°C, ensuring thermal performance equivalence across all substitutes.