CD17ED330JO3 Equivalent & Substitute Parts

Part Overview

The CD17ED330JO3 is a 33 pF mica capacitor rated for 500 V with radial through-hole mounting, manufactured by Cornell Dubilier Electronics (CDE). This component is classified as Active and is designed for RF applications requiring high Q and low loss characteristics. The part is RoHS non-compliant and REACH Affected, which may necessitate identification of compliant alternatives for certain applications or supply chain requirements.

Substiute Parts

CD17ED330JO3

Cornell Dubilier Electronics (CDE)In Stock: 1065CD17ED330JO3 Datasheet

Current PartRFQ

CD17ED330JO3F

Cornell Dubilier Electronics (CDE)In Stock: 1866CD17ED330JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CD17ED330JO3 is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 33 pF (exact match required)
• Tolerance: ±5% (exact match required)
• Voltage Rating: 500 V (exact match required)
• Dielectric Material: Mica (exact match required)
• Mounting Type: Through Hole Radial (exact match required)
• Lead Spacing: 0.232" (5.90mm) (exact match required)
• Operating Temperature Range: -55°C ~ 150°C (exact match required)

The substitute part CD17ED330JO3F meets all electrical and mechanical parameters identically to the main part. The primary distinction between these parts lies in regulatory compliance status, not functional performance.

Parameter Comparison

Engineering Selection Recommendations

CD17ED330JO3F is the direct parametric equivalent to CD17ED330JO3. Selection between these parts should be based on regulatory compliance requirements:

• CD17ED330JO3: Select when RoHS non-compliance is acceptable and REACH Affected status does not conflict with supply chain or end-use requirements.
• CD17ED330JO3F: Select when ROHS3 compliance and REACH Unaffected status are required by design specifications, procurement standards, or regional regulations.

Both parts are Active products with identical electrical performance, mechanical dimensions, and thermal operating range. Inventory availability should be evaluated based on project timeline and volume requirements.

Frequently Asked Questions (FAQ)

Q: Can CD17ED330JO3F be used as a direct replacement for CD17ED330JO3?

A: Yes. CD17ED330JO3F is a parametric equivalent with identical capacitance, voltage rating, tolerance, dielectric material, mounting type, lead spacing, and operating temperature range. The parts are mechanically and electrically interchangeable.

Q: What is the difference between CD17ED330JO3 and CD17ED330JO3F?

A: The primary differences are regulatory compliance status. CD17ED330JO3F is ROHS3 Compliant and REACH Unaffected, while CD17ED330JO3 is RoHS non-compliant and REACH Affected. All functional and mechanical specifications are identical.

Q: Are there any performance differences between these parts?

A: No. Both parts share identical electrical characteristics, including capacitance value, tolerance, voltage rating, operating temperature range, and RF performance features (High Q, Low Loss).

Q: Which part should I select for new designs?

A: Selection depends on regulatory requirements applicable to your application and region. If ROHS3 compliance and REACH Unaffected status are required, select CD17ED330JO3F. If these requirements do not apply, either part is suitable based on availability and cost considerations.

Q: Are the physical dimensions identical?

A: Yes. Both parts have identical dimensions: 0.449" L x 0.169" W (11.40mm x 4.30mm), with maximum seated height of 0.358" (9.10mm), and lead spacing of 0.232" (5.90mm).

Q: What is the moisture sensitivity level for these parts?

A: Both parts have Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control requirements.