CD15FD471JO3 Mica Capacitor 470pF 500V Radial

Part Overview

The CD15FD471JO3 is a 470 pF mica capacitor rated for 500 V with radial lead configuration, manufactured by Cornell Dubilier Electronics (CDE). This component operates across the temperature range of -55°C to 125°C and is classified as general purpose. The part maintains active product status. Alternative models become necessary when component availability fluctuates or when specific compliance requirements such as RoHS3 certification are mandated for applications requiring updated regulatory adherence.

Substiute Parts

CD15FD471JO3

Cornell Dubilier Electronics (CDE)In Stock: 935CD15FD471JO3 Datasheet

Current PartRFQ

CD15FD471JO3F

Cornell Dubilier Electronics (CDE)In Stock: 2187CD15FD471JO3F Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The CD15FD471JO3F qualifies as a direct substitute based on matching electrical and mechanical parameters. Substitution criteria are determined by the following parameters that must remain identical between the main part and any replacement:

• Capacitance: 470 pF (exact match required)
• Tolerance: ±5% (exact match required)
• Voltage Rating: 500 V (exact match required)
• Dielectric Material: Mica (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial (exact match required)
• Lead Spacing: 0.232" / 5.90mm (exact match required)
• Physical Dimensions: 0.469" L x 0.220" W / 11.90mm x 5.60mm (exact match required)

The CD15FD471JO3F meets all substitution criteria and maintains full functional and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

Both the CD15FD471JO3 and CD15FD471JO3F are active products from Cornell Dubilier Electronics with identical electrical and mechanical specifications. The primary distinction lies in regulatory compliance status. The CD15FD471JO3F carries RoHS3 compliance certification, whereas the CD15FD471JO3 does not. Additionally, the CD15FD471JO3F has REACH Unaffected status compared to the REACH Affected status of the CD15FD471JO3. Component selection should be determined by application requirements regarding RoHS3 and REACH compliance mandates. The CD15FD471JO3F offers greater regulatory alignment for applications requiring modern environmental compliance standards. Both parts exhibit full functional equivalence for circuit operation.

Frequently Asked Questions (FAQ)

Q: Can CD15FD471JO3F be used as a direct replacement for CD15FD471JO3? A: Yes. The CD15FD471JO3F is a direct substitute. All electrical parameters (capacitance, voltage rating, tolerance, dielectric material, temperature range) and mechanical specifications (lead spacing, dimensions, mounting type) are identical between the two parts.

Q: What is the primary difference between these two parts? A: The primary difference is compliance certification. The CD15FD471JO3F is RoHS3 compliant and REACH Unaffected, while the CD15FD471JO3 is RoHS non-compliant and REACH Affected. Electrical and mechanical properties are identical.

Q: Are the physical dimensions and lead spacing identical? A: Yes. Both parts have identical dimensions of 0.469" L x 0.220" W (11.90mm x 5.60mm), lead spacing of 0.232" (5.90mm), and maximum seated height of 0.402" (10.20mm). Board-level compatibility is assured.

Q: Which part should I select for a new design? A: Selection depends on regulatory requirements. For applications requiring RoHS3 compliance or REACH compliance status, the CD15FD471JO3F is appropriate. For legacy applications without such requirements, either part may be used based on availability.

Q: Are these mica capacitors suitable for high-frequency applications? A: Both parts are specified for general purpose use with a 500 V rating across an operating temperature range of -55°C to 125°C. Specific frequency application requirements should be evaluated against the mica dielectric properties and the component's intended circuit context.

Q: What is the lead spacing and how does it affect PCB layout? A: The lead spacing is 0.232" (5.90mm). This standard radial lead spacing applies to both parts. PCB pad pitch design should accommodate this lead spacing specification for both the CD15FD471JO3 and CD15FD471JO3F.