CD15FD361FO3F Equivalent & Substitute Parts

Part Overview

The CD15FD361FO3F is a 360 pF mica capacitor manufactured by Cornell Dubilier Electronics (CDE) in the CD15 series. This through-hole radial capacitor operates at 500 V rated voltage with ±1% tolerance and is rated for operating temperatures from -55°C to 125°C. The component is currently in active production status with ROHS3 compliance certification.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same product category. Identification of alternative part numbers ensures design flexibility, supply chain continuity, and component availability for applications requiring 360 pF mica capacitors at 500 V specifications.

Substiute Parts

CD15FD361FO3F

Cornell Dubilier Electronics (CDE)In Stock: 936CD15FD361FO3F Datasheet

Current PartRFQ

CD15FD361FO3

Cornell Dubilier Electronics (CDE)In Stock: 1140CD15FD361FO3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CD15FD361FO3F is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 360 pF (exact match required)
• Tolerance: ±1% (exact match required)
• Voltage Rating: 500 V (exact match required)
• Dielectric Type: Mica (exact match required)
• Mounting Configuration: Through Hole Radial (exact match required)
• Lead Spacing: 0.232" (5.90mm) (exact match required)
• Physical Dimensions: 0.469" L x 0.209" W, Height 0.390" max (exact match required)
• Operating Temperature Range: -55°C ~ 125°C (exact match required)

The substitute part CD15FD361FO3 maintains all electrical and mechanical parameters identical to the primary part number. Differences in regulatory compliance status and inventory levels do not affect functional equivalence for component selection purposes.

Parameter Comparison

Engineering Selection Recommendations

Both CD15FD361FO3F and CD15FD361FO3 are functionally equivalent 360 pF mica capacitors at 500 V with identical electrical and mechanical specifications. Selection between these part numbers is determined by regulatory and compliance requirements specific to the application.

CD15FD361FO3F is the appropriate selection for applications requiring ROHS3 compliance certification and REACH Unaffected status. This part number is suitable for consumer electronics, automotive, and regulated industrial applications where environmental compliance documentation is mandatory.

CD15FD361FO3 is functionally equivalent but carries RoHS non-compliant and REACH Affected designations. This part number is suitable for applications where regulatory compliance is not a requirement or where legacy component specifications are maintained.

Both parts are in active production status with adequate inventory availability. Selection should be based on the specific compliance requirements of the end application and regulatory jurisdiction.

Frequently Asked Questions (FAQ)

Q: Are CD15FD361FO3F and CD15FD361FO3 electrically interchangeable?

A: Yes. Both part numbers are 360 pF mica capacitors with ±1% tolerance, 500 V rated voltage, and identical operating temperature ranges of -55°C to 125°C. Electrical performance is equivalent.

Q: Are the physical dimensions identical between these part numbers?

A: Yes. Both parts have identical radial through-hole configurations with 0.232" (5.90mm) lead spacing, 0.469" L x 0.209" W body dimensions, and 0.390" maximum seated height. PCB layout and mounting requirements are identical.

Q: What is the difference between these two part numbers?

A: The primary differences are regulatory compliance certifications. CD15FD361FO3F carries ROHS3 compliance and REACH Unaffected status, while CD15FD361FO3 is RoHS non-compliant and REACH Affected. Electrical and mechanical specifications are identical.

Q: Which part number should I select for a new design?

A: Selection depends on application requirements. For applications requiring environmental compliance documentation, select CD15FD361FO3F. For applications without compliance requirements, either part number is functionally suitable.

Q: Can I use CD15FD361FO3 as a replacement for CD15FD361FO3F in an existing design?

A: Functional replacement is possible from an electrical and mechanical standpoint. However, compliance documentation requirements must be evaluated. If the original design specified ROHS3 compliance, substitution with a non-compliant part number may not be acceptable.

Q: Are there inventory differences between these part numbers?

A: Yes. CD15FD361FO3F has 867 pieces in stock, while CD15FD361FO3 has 1125 pieces in stock. Availability may influence selection for time-sensitive procurement.