CD15ED620JO3 Equivalent & Substitute Parts

Part Overview

The CD15ED620JO3 is a 62 pF mica capacitor rated for 500 V with radial through-hole mounting, manufactured by Cornell Dubilier Electronics (CDE). This component is classified as active and suitable for general-purpose applications requiring stable capacitance and high voltage performance across extended temperature ranges (-55°C to 125°C).

Identifying equivalent and substitute parts is necessary when the primary part number becomes unavailable, when procurement lead times require alternative sourcing, or when design requirements mandate compliance with specific regulatory standards such as RoHS or REACH regulations.

Key Parameters

Parameter	Value	Significance for Substitution
Capacitance	62 pF	Critical - must match exactly for circuit function
Tolerance	±5%	Critical - determines acceptable capacitance range
Voltage Rating	500 V	Critical - minimum voltage requirement for safe operation
Dielectric Material	Mica	Critical - defines electrical characteristics and stability
Mounting Type	Through Hole	Critical - determines PCB assembly compatibility
Package / Case	Radial	Critical - physical form factor and lead configuration
Lead Spacing	0.232" (5.90mm)	Critical - PCB footprint compatibility
Operating Temperature Range	-55°C to 125°C	Important - environmental performance specification
Series	CD15	Important - product line consistency

Substitute Part Grouping Explanation

Substitute parts for the CD15ED620JO3 are identified based on strict parametric equivalence. The substitution logic requires that all critical electrical parameters remain identical:

Capacitance Value: 62 pF (exact match required)
Tolerance: ±5% (exact match required)
Voltage Rating: 500 V (exact match required)
Dielectric Type: Mica (exact match required)
Mounting Configuration: Through Hole Radial (exact match required)
Lead Spacing: 0.232" / 5.90mm (exact match required)
Temperature Range: -55°C to 125°C (exact match required)

Substitute parts may differ in regulatory compliance status (RoHS, REACH), packaging conditions, or inventory availability, but must maintain identical electrical and mechanical specifications to ensure direct interchangeability in circuit applications.

Parameter Comparison

Parameter	CD15ED620JO3	CD15ED620JO3F	Match Status
Manufacturer	Cornell Dubilier Electronics (CDE)	Cornell Dubilier Electronics (CDE)	Identical
Series	CD15	CD15	Identical
Capacitance	62 pF	62 pF	Identical
Tolerance	±5%	±5%	Identical
Voltage Rating	500 V	500 V	Identical
Dielectric Material	Mica	Mica	Identical
Mounting Type	Through Hole	Through Hole	Identical
Package / Case	Radial	Radial	Identical
Lead Spacing	0.232" (5.90mm)	0.232" (5.90mm)	Identical
Physical Dimensions	0.449" L x 0.169" W (11.40mm x 4.30mm)	0.449" L x 0.169" W (11.40mm x 4.30mm)	Identical
Height - Seated (Max)	0.358" (9.10mm)	0.358" (9.10mm)	Identical
Operating Temperature	-55°C to 125°C	-55°C to 125°C	Identical
RoHS Status	RoHS non-compliant	RoHS3 Compliant	Different
REACH Status	REACH Affected	REACH Unaffected	Different
Product Status	Active	Active	Identical

Engineering Selection Recommendations

CD15ED620JO3F is a direct parametric equivalent to CD15ED620JO3 with identical electrical and mechanical specifications. The primary distinction between these parts is regulatory compliance:

CD15ED620JO3: RoHS non-compliant, REACH Affected
CD15ED620JO3F: RoHS3 Compliant, REACH Unaffected

Selection between these parts should be based on the regulatory requirements of the end application and target market. Applications subject to RoHS3 directives or REACH restrictions require the CD15ED620JO3F variant. Applications without such regulatory constraints may use either part number interchangeably from an electrical and mechanical standpoint.

Both parts are active products with confirmed inventory availability. The CD15ED620JO3 has 1061 units in stock, while CD15ED620JO3F has 803 units in stock.

Frequently Asked Questions (FAQ)

Q: Can CD15ED620JO3F be used as a direct replacement for CD15ED620JO3?

A: Yes. CD15ED620JO3F is electrically and mechanically identical to CD15ED620JO3. Both parts have the same capacitance (62 pF), tolerance (±5%), voltage rating (500 V), dielectric material (mica), mounting type (through hole radial), lead spacing (0.232" / 5.90mm), and physical dimensions. Direct substitution is valid from a circuit performance perspective.

Q: What is the difference between these two part numbers?

A: The primary differences are regulatory compliance certifications. CD15ED620JO3F is RoHS3 compliant and REACH unaffected, while CD15ED620JO3 is RoHS non-compliant and REACH affected. Electrical and mechanical specifications are identical.

Q: Which part should I select for a new design?

A: Selection depends on regulatory requirements. For applications requiring RoHS3 compliance or REACH compliance, specify CD15ED620JO3F. For applications without such regulatory constraints, either part is acceptable. Consult your design requirements and target market regulations.

Q: Are the physical dimensions and PCB footprints identical?

A: Yes. Both parts have identical dimensions (0.449" L x 0.169" W / 11.40mm x 4.30mm), maximum seated height (0.358" / 9.10mm), and lead spacing (0.232" / 5.90mm). PCB footprints are interchangeable.

Q: Can I mix these parts in the same production batch?

A: Both parts are electrically and mechanically equivalent and can be used interchangeably in the same circuit. However, if your application or customer requires consistent RoHS or REACH compliance across all components, maintain consistency by using the same part number throughout production.

Q: What is the operating temperature range for both parts?

A: Both CD15ED620JO3 and CD15ED620JO3F operate across the same temperature range: -55°C to 125°C.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message