CD15CD150DO3 Equivalent & Substitute Parts

Part Overview

The CD15CD150DO3 is a 15 pF mica capacitor rated for 500 V operation in a radial through-hole configuration, manufactured by Cornell Dubilier Electronics (CDE). This component is classified as active and currently in production. Mica capacitors of this specification are used in general-purpose applications requiring stable capacitance values and high voltage tolerance across extended temperature ranges.

Identification of substitute parts becomes necessary when the primary part number experiences supply constraints, when specific compliance certifications are required for end-use applications, or when inventory optimization across equivalent product variants is required.

Substiute Parts

CD15CD150DO3

Cornell Dubilier Electronics (CDE)In Stock: 892CD15CD150DO3 Datasheet

Current PartRFQ

CD15CD150DO3F

Cornell Dubilier Electronics (CDE)In Stock: 1020CD15CD150DO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CD15CD150DO3 is determined by strict equivalence across all electrical and mechanical parameters. The following criteria establish valid substitution:

Electrical Parameters (Must Match Exactly):

• Capacitance: 15 pF
• Tolerance: ±0.5 pF
• Voltage Rating: 500 V
• Dielectric Material: Mica

Mechanical Parameters (Must Match Exactly):

• Mounting Type: Through Hole
• Package Configuration: Radial
• Lead Spacing: 0.232" (5.90 mm)
• Physical Dimensions: 0.449" L x 0.169" W (11.40 mm x 4.30 mm)
• Maximum Seated Height: 0.358" (9.10 mm)

Operating Conditions (Must Match Exactly):

• Temperature Range: -55°C to 125°C

The substitute part CD15CD150DO3F meets all electrical and mechanical equivalence criteria and is therefore classified as a parametric equivalent.

Parameter Comparison

Engineering Selection Recommendations

CD15CD150DO3: This part number is RoHS non-compliant and REACH Affected. Selection is appropriate for applications without RoHS3 or REACH compliance requirements. Current inventory: 804 pcs.

CD15CD150DO3F: This part number is ROHS3 Compliant and REACH Unaffected. Selection is appropriate for applications requiring RoHS3 compliance certification or REACH compliance status. Current inventory: 970 pcs. This variant is functionally and mechanically identical to CD15CD150DO3 across all electrical and physical parameters.

Selection between these two part numbers is determined solely by the compliance requirements of the end application. Both parts are electrically and mechanically interchangeable.

Frequently Asked Questions (FAQ)

Q: Are CD15CD150DO3 and CD15CD150DO3F electrically identical?

A: Yes. Both parts have identical capacitance (15 pF), tolerance (±0.5 pF), voltage rating (500 V), dielectric material (Mica), and operating temperature range (-55°C to 125°C).

Q: Are these parts mechanically interchangeable?

A: Yes. Both parts share identical mounting type (Through Hole), package configuration (Radial), lead spacing (0.232" / 5.90 mm), physical dimensions (0.449" L x 0.169" W / 11.40 mm x 4.30 mm), and maximum seated height (0.358" / 9.10 mm).

Q: What is the difference between CD15CD150DO3 and CD15CD150DO3F?

A: The primary differences are compliance certifications. CD15CD150DO3F is ROHS3 Compliant and REACH Unaffected, while CD15CD150DO3 is RoHS non-compliant and REACH Affected. All electrical and mechanical specifications are identical.

Q: Which part should I select for a RoHS3-compliant application?

A: CD15CD150DO3F is ROHS3 Compliant and is the appropriate selection for applications requiring RoHS3 certification.

Q: Which part should I select for a REACH-compliant application?

A: CD15CD150DO3F is REACH Unaffected and is the appropriate selection for applications requiring REACH compliance status.

Q: Can I use CD15CD150DO3F as a direct replacement for CD15CD150DO3?

A: Yes, for applications where compliance status is not a constraint. Both parts are parametrically equivalent across all electrical and mechanical parameters.

Q: Can I use CD15CD150DO3 as a direct replacement for CD15CD150DO3F?

A: Only if the application does not require RoHS3 or REACH compliance. The parts are electrically and mechanically identical, but compliance certifications differ.