CD10FD201JO3 Equivalent & Substitute Parts

Part Overview

The CD10FD201JO3 is a 200 pF mica capacitor rated for 500 V with ±5% tolerance, manufactured by Cornell Dubilier Electronics (CDE) in the CD10 series. This through-hole radial component is designed for general-purpose applications requiring stable capacitance and high voltage performance across the operating temperature range of -55°C to 125°C. The part is currently active in production. Identification of equivalent and substitute parts is necessary to ensure design flexibility, manage supply chain continuity, and address specific compliance or packaging requirements.

Substiute Parts

CD10FD201JO3

Cornell Dubilier Electronics (CDE)In Stock: 714CD10FD201JO3 Datasheet

Current PartRFQ

CD10FD201JO3F

Cornell Dubilier Electronics (CDE)In Stock: 1088CD10FD201JO3F Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the CD10FD201JO3 is determined by strict equivalence across the following critical parameters:

• Capacitance Value: 200 pF (exact match required)
• Tolerance: ±5% (exact match required)
• Voltage Rating: 500 V (exact match required)
• Dielectric Material: Mica (exact match required)
• Mounting Type: Through Hole (exact match required)
• Package Configuration: Radial (exact match required)
• Lead Spacing: 0.142" (3.60 mm) (exact match required)
• Physical Dimensions: 0.390" L x 0.209" W, Height 0.370" max (exact match required)
• Operating Temperature Range: -55°C to 125°C (exact match required)

The substitute part CD10FD201JO3F meets all electrical and mechanical parameters identically to the main part. The primary distinction between these parts lies in compliance certifications and regulatory status, not in functional or physical characteristics.

Parameter Comparison

Engineering Selection Recommendations

CD10FD201JO3 is suitable for applications where RoHS non-compliance is acceptable and REACH-affected materials are permitted by design specifications or regulatory requirements.

CD10FD201JO3F is the appropriate selection for designs requiring ROHS3 compliance and REACH-unaffected material composition. This variant maintains identical electrical performance and physical form factor while meeting enhanced environmental and regulatory standards.

Both parts are active products from the same manufacturer and series. Selection between them depends solely on compliance requirements of the end application and applicable regulatory frameworks. No functional or performance differences exist between these parts.

Frequently Asked Questions (FAQ)

Q: Can CD10FD201JO3F be used as a direct replacement for CD10FD201JO3?

A: Yes. Both parts are electrically and mechanically identical. The CD10FD201JO3F can be substituted directly into any circuit designed for the CD10FD201JO3. The only differences are RoHS and REACH compliance status.

Q: What is the difference between these two part numbers?

A: The CD10FD201JO3 is RoHS non-compliant and REACH-affected. The CD10FD201JO3F is ROHS3 compliant and REACH-unaffected. All electrical specifications, physical dimensions, and performance characteristics are identical.

Q: Which part should I select for a new design?

A: If your application or market requires RoHS3 compliance or REACH compliance, select CD10FD201JO3F. If no such requirements apply, either part is acceptable. Verify compliance requirements with your design specifications and applicable regulations.

Q: Are the physical dimensions identical?

A: Yes. Both parts have identical lead spacing (0.142" / 3.60 mm), body dimensions (0.390" L x 0.209" W / 9.90 mm x 5.30 mm), and maximum seated height (0.370" / 9.40 mm). They are pin-compatible and footprint-compatible.

Q: Can I mix these parts in the same production batch?

A: Yes, from an electrical and mechanical standpoint. However, verify that your quality and compliance documentation requirements permit mixing parts with different RoHS and REACH status within a single assembly or batch.

Q: What is the lead spacing specification?

A: The lead spacing is 0.142 inches (3.60 millimeters) for both parts. This dimension is critical for PCB footprint design and component placement.